"300"
Gottlieb, 1975
2001
Gottlieb, 1971
8 Ball
Williams, 1966
Abra Ca Dabra
Gottlieb, 1975
Amigo
Bally, 1974
Aquarius
Gottlieb, 1970
Atlantis
Gottlieb, 1975
Bank-A-Ball
Gottlieb, 1965You're currently viewing posts by Pinsider mh.
Click here to go back to viewing the entire thread.
Quoted from insight75:How about a 50s Gottlieb woodrail coin door hinge? Anyone got one kicking around or know where I can get one? Will be about 5 1/2 inches long.....
I think I might have one, let me see if I kept it when I dismantled an old 1957 gottlieb cabinet. You say it’s about 5 inches?
Quoted from MH:I think I might have one, let me see if I kept it when I dismantled an old 1957 gottlieb cabinet. You say it’s about 5 inches?
here it is.
EF9BCF0E-7170-4F7E-8D2D-A9EDDFC298AF (resized).jpegQuoted from Robo1:Looks like I will be needing a score reel unit for a 63 Gottlieb. Do any of you gentlemen happen to have one? I have sent a few machines to a local game museum and got a message today that it's burnt I am hoping it's just the coil and metal score reel but I think it would be good just to have the whole unit......
Thanks!
Rob
I have score reels from a 1961 gottlieb, it’s the same as my 62 gottlieb...If 63 is the same as 61- then I have one.
Quoted from pinhead52:I need 2-3 3 inch plastics reels to a 70s Bally, Capt fantastic etc
thanks
ken
I’llook- I think I have 2 extra.l
Quoted from MH:I’llook- I think I have 2 extra.l
Here are the 2 I have, a few of the numbers have flaked some, I have a third, but flaking on that one is substantial.
238B7DD9-1DAA-4423-8B1B-15CEB6C456E9 (resized).jpeg273CE50B-53E0-458D-A5AA-5CB44D9C782F (resized).jpeg340C2F24-B29A-4694-A3DC-18D6FF3E5D56 (resized).jpegBDD510A0-F0B3-42DE-829A-C863154009CE (resized).jpegQuoted from DJ1953:Im looking for a a couple pop bumper for my 1962 Gottlieb Fashion show. lt is the old style pop bumper body GTB-25W. Everyone seems to be out of stock.
I have pop bumpers from a 1961 gottlieb flying circus- If those work for you.
Quoted from Murphdom:Anyone have a bell assembly bracket? I have a 3 inch bell where the bracket broke off that holds the bell shell. I know PBR sells the whole setup but I figured I’d ask here first. Thanks
I’m sure I have one, but I’m away from home working until this Friday.
Quoted from Murphdom:Anyone have a bell assembly bracket? I have a 3 inch bell where the bracket broke off that holds the bell shell. I know PBR sells the whole setup but I figured I’d ask here first. Thanks
Here it is.
2F4C8CB7-0138-49A1-92E9-D04E0EF654A8 (resized).jpeg512426D9-EA89-45C1-9D59-E8E31B762AD7 (resized).jpeg7A450FD7-2AF7-4038-B15A-7D7DB70CA137 (resized).jpegQuoted from Coyote:I'm looking for a mid-70's EM Williams Coinbox. Thre metal with handle version. Extra bonus points if it comes with the inner separator trays.
Am also looking for the LARGE arrow inserts (2 of them) that are in a Jubilee / Darling playfield under the captured balls. Can be in poor condition, cupped, etc - as long as they're whole and not cracked.
Thanks guys!
Quoted from Coyote:I'm looking for a mid-70's EM Williams Coinbox. Thre metal with handle version. Extra bonus points if it comes with the inner separator trays.
Am also looking for the LARGE arrow inserts (2 of them) that are in a Jubilee / Darling playfield under the captured balls. Can be in poor condition, cupped, etc - as long as they're whole and not cracked.
Thanks guys!
What’s the coin box look like, dimensions?
I have 2 coin boxes- one sort of lost and I sometimes trip over my other one, reason I ask is I know one of them came from my Williams straight flush machine I let go about a year back.
Quoted from Coyote:The coin box ("cash box" as referred to in the parts catalog, looks like: https://pinwiki.com/wiki/images/d/d6/Coinbox-williams-wire-handle-1.jpg
It's pretty much a metal version of the black plastic ones in use today.
Then there were plastic bin inserts, that looked like: https://pinwiki.com/wiki/images/d/d5/Williams-sys-coinbox-4.jpg
The small bins IN the metal box.
In the end, I need two small and one meduim, but at the moment, since I have nothing, I'll take whatever anyone can throw my way.
This is the one that’s sort of lost- if you saw my storage shed, you would know what I’m talking about- I’ll be on the lookout for it.
Quoted from Geofflove:I have 2 Williams machines, Doodlebug and Soccer, both have the 3 inch bells missing from the match units. I don't need any mechanisms just the bells them self. Anyone have any lurking around to sell? Or any bright ideas where to source a modern day version on something?
Just to add to the fun I'm in the UK - happy to pay postage though.
Thanks
I know I have at least 1 three inch bell from an early 60’s gottlieb machine, might even have 2?
Quoted from dsquared_314:I noticed a broken individual switch on gottlieb EM. I Checked Marco and other online stores and can’t find an assortment of individual switches or a single long leaf switch. Any other places I could buy single or assortment leaf switches?[quoted image]
I should have what your looking for, or PBR if you want to go that route.
The numbers are good on all five reels, the 3 on the left are in better condition, they all seem to have light pitting on the paint around the 2 through 4- makes me think the hot bulbs all those years back in the day…shining on those areas?
E6DBB7AA-083A-46C0-908D-F19E104705E2 (resized).jpegEF91BA0B-5DAC-4A2F-9F70-4364A13E43FA (resized).jpegF411E3C4-6353-41FE-BB2C-60DE62E7ECDA (resized).jpegQuoted from No_Skill:I'm looking for the back panel for my Old Chicago. This is my first EM, so I'm not sure if I'm missing any associated brackets as well.
[quoted image]
Wouldn’t your back door have the same dimensions, like my back door on a Bow and Arrow machine from 1975? How about making a back door out of plywood, heck you can paint it silver and use that until you track down an original…Just a suggestion.
I can give you the dimensions of my back door if you go that route.
Quoted from AlanPinballMan:Is this still the case - I need a set of these as well.
I think I still have 2, let me check.
Edit- I have 2 pop bumpers left, from my 1961 flying circus
I am in need of a tens score reel nylon ratchet part that attaches to the solenoid for a ‘65 Gottlieb Buckaroo. Any one have this? TIA</blockquote
Is the Buckaroo still using the rat trap score reels? I’ll have that part if it does.
Quoted from Stevie-D:I am in need of a tens score reel nylon ratchet part that attaches to the solenoid for a ‘65 Gottlieb Buckaroo. Any one have this? TIA
I should have one- If buckaroo still used the old rat trap score reels.
Quoted from Murphdom:The longest shot ever…anyone…?
[quoted image]
What is it that your looking for in this pic?
Quoted from Murphdom:Everything shown. Lockdown with end caps & shooter assembly.
I have the shooter assembly from my 61 flying circus
Quoted from CactusJack:Got a friend looking for a complete cash box for his Volley. If any one has one they want to part with, let me know. Doesn't have to be nice and shinny, just shouldn't look like it was unearthed from the local dinosaur diggings.
I have 5 cash boxes, but don’t know what’s what- some came from a few pins I no longer have and one came from my Buccaneer, that one should work?
Let me know what it looks like- or dimensions.
Quoted from JethroP:I think he was asking for a cash box 8 years ago!
Jeez, must have pulled from the front page
MB
Quoted from pinhead52:pbr will sell you equivalents but if you really want the R20-5 (9735 general coil) I can probably dig up a couple.
Yes please, I have the equivalent already, and these need to be modified to make them work proper, many thanks in advance if you can find 2 of them.
Quoted from Drain1:Just curious, are you replacing those pictured?
No- those are fine- it’s player 1 that’s roasted, and I want 1 spare.
Quoted from o-din:This is some of it, but there's more. I'm digging out some parts that have already been requested.[quoted image]
I haven’t had a Williams machine in 3 years, but I’m picking up my eager beaver I bought 2 months ago, think I might be hitting you up for coils- it’s an early 60’s machine, I’m more familiar with gottlieb now- did Williams stick with a lot of the same coils in the 60’s and 70’s?
Quoted from pinhead52:sorry, struck out. I have 9735s in the old form factor but no R20-5s
Thanks for trying
Quoted from RacingPin:I have these two. Both ohm right around 24.1
[quoted image]
I’ll take them, dm me and we will work out the payment
Thx
Mike
Quoted from Bonk:I found a broken leaf blade in this relay from a 1965 Gottlieb and was wondering if anyone had a spare blade or an entire relay I could buy to grab one from. Thanks!
[quoted image]
I have some 70’s relays like this one or I have some relays off a 1961 machine- I should have what you need.
IMG_2293 (resized).jpegLooking for coin mechs- I owned a machine that took the same mechs that I’m looking for, and never really gave it a thought- it’s a Williams eager beaver 1964, I believe they used the same ones for a few years at least….I had a Williams full house, I hear they can be trouble,the way there designed.
I’ll take the whole door if someone has one intact.
You're currently viewing posts by Pinsider mh.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-em-seeking-parts-thread?tu=mh and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Orange, CA
