OK, I have a tough request: I'm looking for the nylon clutch that Bally used for a few years on that long combination relay bank/score motor they came up with. I need it for a King Tut, and I know On Beam used it, not sure what other machines had them.

Here's some photos. If you have one, name your price:

Bally Clutch 3.jpg
Bally Clutch 2.jpg
Bally Clutch.jpg

^^^ I need the one for the END of the shaft, 800-152.

I need a set of plastics for a Gottlieb Easy Aces.

Shay has reproduced them, but he's out of stock. Anyone have a set they're not using?

Anyone have a set they would run through a scanner for me so I can make decals?

image-7.jpg

image-8.jpg

I need a pair of metal rollovers as shown in the photo. Any help is greatly appreciated.

image-25.jpg

Thanks

I just picked up a Williams Jig Saw, and it's missing some pieces on the apron. If anyone has the metal frames for the business card holder or the score card holder (see photo), I would appreciate hearing about it.

Also, is anyone reproducing that "Balls Played" decal, or am I on my own for making one?

ThanksWilliams_Missing_Parts_(resized).jpg

A clock repair shop should be able to fix you up with a striker that would work.

Here's a couple from a clock supply place (the same place you can get replacement bells):

http://timesavers.com/i-8948457-brass-french-clock-bell-hammer.html

http://timesavers.com/search-3.html?q=bells

In addition to the two metal frames I asked about below, I need a start button for the front of the cabinet. It's just a flipper button, and I assumed I could fit one of my extra Gottlieb buttons. I had no idea the Williams woodrail buttons are smaller in diameter.

Anyone have a spare button? PBR doesn't have them.

Thanks Again

Looking for plastics for Gottlieb Easy Aces. Shay is out of his reproductions.

If you're sitting on a complete set that's great, but I really only need the big center plastic.

Thanks

I need one blue cap like the one shown. PBR sells productions, but I would much rather have an original. Thanks!

image-3_(resized).jpg

I asked a couple years ago, but I'm still looking--if anyone has the metal frames for the business card holder or the score card holder (see photo) on Williams woodrails, I would appreciate hearing about it.

Also, is anyone reproducing that "Balls Played" decal?

Thanks

c8dec83c239e9284c5e91e379b7a60d0d111606e (resized).jpg

I need a couple original red rollovers for a Gottlieb woodrail. I know PBR sells new ones, but I would rather try to match the original marbled red ones.

Thanks!

image-29 (resized).jpg