(Topic ID: 93586)
Linked Games
"300"
Gottlieb, 1975-
2001
Gottlieb, 1971
-
8 Ball
Williams, 1966
-
Abra Ca Dabra
Gottlieb, 1975
-
Amigo
Bally, 1974
-
Aquarius
Gottlieb, 1970
-
Atlantis
Gottlieb, 1975
-
Bank-A-Ball
Gottlieb, 1965
There are more than 8 games linked to this topic.
Click here to show all linked games
Click here to show all linked games
Topic Gallery
You're currently viewing posts by Pinsider bonk.
Click here to go back to viewing the entire thread.
Quoted from tfduda:I may have a spare one (though am not sure if it’s for a late 40s Williams machine). Do you know the dimensions of a late 40s Williams lockdown bar? Or can you at least measure the distance between the bolt holes for the lockdown bar on your cabinet (and maybe the distance from each hole to each side of the cabinet)? At least that way I can check to see if I have one that could work for you.
PM sent. Thanks!
2 weeks later
Anyone familiar with the Bally 5 bank drop target used in games like Freedom, Capt Fantastic and others. Mine is missing these parts on both ends of the assembly so looks like I need two of each except for the single plunger. If anyone has these parts or the complete assembly please let me know.
2513B9D7-4AA5-4421-921A-D3B7270519CA (resized).jpegEB048A93-8124-4A5F-ADBD-AA35DB3D6B54 (resized).jpeg 8 months later
This was posted on Instagram today, maybe it could help some here. More pics on their story
https://www.instagram.com/p/CQY057IAiTK/?utm_medium=share_sheet
75A0CADF-F9D5-42AF-A66C-FB1AAC1FA8C3 (resized).jpegEAFC2618-070F-487D-A8E3-79A41D3C4F33 (resized).jpegBDCB0810-F7D2-4BB0-B3A3-3BB945FC7F78 (resized).jpeg9BDE55C7-15C5-42DA-A2AA-913CD83A6B14 (resized).jpegCBFFF2B7-A2B5-44A8-B37E-6421B1F7F30D (resized).jpeg5E7308B7-426D-4B5E-8837-72F2E8728DA1 (resized).jpeg 8 months later
Looking for a back box door for a Bally 4 player from the mid 70s. I can grab some measurements if needed.
1 week later
Quoted from newmantjn:Please do. I have a number of random back doors that may work. ...and you are local.
Thanks for the help! The door I'm looking for is
27 and 3/4 inches wide x 25 and 1/2 inches tall. If you have one that size I'd be glad to buy it from you. Very nice collection by the way.
1 week later
Quoted from Bonk:Looking for a back box door for a Bally 4 player from the mid 70s.
Bumping this in case anyone has one to sell. Size is 27 and 3/4 inches wide x 25 and 1/2 inches tall.
Quoted from newmantjn:Sorry it took so long to get back to you. We were out of town for a bit. I have a door that is 27-5/8 x 25. I am almost sure it is from a Gottlieb.
I have had doors custom bent up in the past by HVAC guys for a very nominal price. Often, the material is a little thin, but one thing you can do is line the door with a sheet of plywood. I have bought some games with this modification on factory doors. If you decide to go this route, I could help you cut the plywood if required.
[quoted image][quoted image][quoted image]
Thanks so much for looking in to that for me! It does look like it could be a Gottlieb door but I appreciate the help. Good idea to get one custom made, might end up going that route. Thanks again!
1 year later
Quoted from MH:I have some 70’s relays like this one or I have some relays off a 1961 machine- I should have what you need.
[quoted image]
Thank you! PM sent.
Quoted from vec-tor:That is a special lockin switch that is very hard to find.
Override blade #A-4986
Lockin make with small points #B-5363 [complete switch assembly]
You’re right thanks for pointing this out. I was thinking it was a “make with small points” switch but looking closer on PBR I see I was wrong. Do you know if it’s possible to convert a make switch to a lockin make? This is on the 10 points relay in a Cow-Poke.
Edit: Found some pictures of the switch on Marcos. Looking for this switch assembly if anyone has one. IMG_1672 (resized).jpeg
Quoted from MikeO:The "lockin" portion of this switch is the long blade with the centering tab if I understand your terminology correctly. They need to be applied together to be assembled properly.
These parts appear to exist in the relay that MH posted above in post 10188 of this thread.
While they may not be the exact preassembled switch configuration you need, you should be able to disassemble the actual switch blade(s) and spacer(s) from MH's relay to rebuild your existing switch to the correct orientation.
Or am I missing something here?
Thanks a lot for explaining this, I’ve got the relay from MH on the way so I’ll try that as soon as I can. I wasn’t sure it had the correct switch on it when I posted but thinking you’re right and it should work.
1 month later
Quoted from newmantjn:Did you get this figured out? I have a ton of relays, coils etc. and live roughly Plymouth and Green Road. Stop by and I'll hook you up.
Thank you! The relay I got from MH was exactly what I needed but just wanted to say I really appreciate the offer and will definitely reach out next time I need something. Thanks again.
Promoted items from Pinside Marketplace and Pinside Shops!
Shaker Heights, OH
You're currently viewing posts by Pinsider bonk.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
