I had posted this as a wanted ad:
https://pinside.com/pinball/forum/topic/williams-score-reel-5-1-2-inch-dia-for-ten-pins-strike#post-5044231

But this may be a more visible place. I need a score reel for my Williams Ten Pins. Nothing special about it, has a detent to trigger the switch to indicate when it is in the zero position (as opposed to using a reset coil), so I suspect any 5 1/2 diameter reel would work. Here is a picture of the good one from the player 1 side.

IMG_5815 (resized).JPG

IMG_5818 (resized).JPG

Yes, I really only need the hub. I never even thought about getting just the hub,,, assumed (you know what they say about that!) it would be available as a unit. But thinking about it, I now realize that was pretty dumb of me since the hub was the piece most likely to break. Does the crossfire reset by incrementing back to zero?

Shout-out to Cliff, PinballAir , for the part to fix the score reel on my Ten Pins. Works perfectly now! I only needed the hub, (Cliff sent the whole score unit) so if anyone needs the other components let me know.

OK, so here's one you. The start button on my Genco bball has worn down to the point where there is actually a hole in it. It appears to be the same as the buttons used on my PinchHitter. My Pinchhitter came with aluminum buttons; although I know they were originally plastic like the Genco. I know Marcos carries the aluminum ones (although currently out of stock), but I'd like plastic. Does anyone know a source for these? My other option is to just design the part and 3d print them. I wonder if someone has already designed this part? If not, while I'm no CAD master, it seems like a pretty easy design and would be a fast print. Plus, I figure, others may be able to use it. Of course, if there is a source already, better still.
Thoughts?

I'm sure you know this, but just in case. They used actual guns for many, perhaps all, of those games. Therefore, you might have better luck looking for a stock to the gun that was on that game as opposed to looking for a stock for the game, if that makes sense. If I recollect correctly, the stock on the Midway Capt'n Kidd I had was from an old Winchester 22...I'll see if I wrote down the model somewhere.

Doh...As soon as I read that, the light came on. I'm not sure why I though mine had a Winchester