I am looking for a set of original replay cards for a ‘65 Gottlieb Bank-A-Ball. These are the full size cards with two sets of replay scores on them on opposing sides of the card.
You're currently viewing posts by Pinsider Gotemwill.
Click here to go back to viewing the entire thread.
I am looking for a set of original replay cards for a ‘65 Gottlieb Bank-A-Ball. These are the full size cards with two sets of replay scores on them on opposing sides of the card.
Quoted from Inkochnito:I have a reproduction file on my website http://www.inkochnito.nl
Look in the Gottlieb section.
There are only two cards in the file.
One with match and one without match.
The score levels are included in the card.
If you want seperate score cards, let me know and I'll add them to the file.
Peter
Thanks Peter! Sure wish I could find old card stock that matches the look of the originals.
I am looking for middle and long Gottlieb tone bars for a Gottlieb chime unit.
http://pbresource.com/signatur/kt-gchime-01.jpg
Must be original and in good condition. I am trying to correct this!
https://pinside.com/pinball/forum/topic/gottlieb-chime-bar-tone#post-5268361
Has anyone found a source for card stock that is similar to aged originals?
Obviously I would still like to find originals.
I am looking for a lockdown bar for a ‘54 Gottlieb Stagecoach. Based on the difference in the finish from the siderails, I think it has been replaced at some point. The fit is also not great as pictured and wobbles unless it is really tightened down.
If anyone has a nice original with the lighter lacquered finish that matches my side rails, please contact me. The type I need has the metal rail to fit in the narrow cabinet slot and was used by Gottlieb from from 1954-1960. See pictures. Would also trade if someone is looking for what I have.
AC38B5B3-8295-4906-901B-6910DC8E7849 (resized).jpegAD37DE8A-4E70-4D0B-871A-4FE494A9CDB9 (resized).jpegEEAAC908-2DEB-42FB-ACBE-9C27CAC207B5 (resized).jpegQuoted from Gotemwill:I am looking for a lockdown bar for a ‘54 Gottlieb Stagecoach. If anyone has a nice original with the lighter lacquered finish that matches my side rails, please contact me. The type I need has the metal rail to fit in the narrow cabinet slot and was used by Gottlieb from from 1954-1960. See pictures. Would also trade if someone is looking for what I have.
[quoted image][quoted image][quoted image]
Still looking!
Looking for early 50’s Gottlieb red rollover buttons that are in better shape than these. I realize that new ones are available but I am trying to keep this game in original condition and would like them to match the overall game condition.
Thanks!
7B8C913D-C600-4F53-95D9-A65B4482052C (resized).jpegQuoted from waltrr:Did you find your red rollovers and are any of your white sockets broken?
I am still looking for original red rollovers.
By white sockets, I assume you mean the plastics in the gobble holes? A couple of mine are cracked on the inside. Would be interested in originals of these as well.
Still looking for an original, matching lockdown bar! Not convinced this one is correct based on fit and finish.
F0024225-A1B1-4672-9CAA-1B68BDB60352 (resized).jpegF96AFE52-8FD7-4B4E-B701-494F2A17394E (resized).jpeg
Quoted from waltrr:I was asking about the white inserts the red rollovers are in. I can help you with the red rollovers, I have some NOS stock,
just checking to see if you're sockets are still good.
Walt
The white inserts are good. I’ll send you a PM. Thanks!
I am looking for the spring that attaches to a Gottlieb outhole kicker. It is Gottlieb Part No A-9758.
It is unavailable from both PBR and Marco.
Does anyone have a new spring or one from a parted machine?
https://www.marcospecialties.com/pinball-parts/A-9758
9E595DAE-EF51-4FF9-A3A2-6D777E990A7F (resized).jpegF7B2D972-54CF-45FC-B6C0-D9474490C282 (resized).jpegI am looking for (5) 1.5”, 2 hole, single sided lane guides in opaque white. Looking for nice, uncracked originals that are aged (yellowed) like these.
They are going on a Buccaneer Serial #1077S.
Thanks in advance for any help!!
DE6A36A3-B1A0-4D16-884D-28CD4112DC73 (resized).jpegE65E8E56-AB3A-4225-BAB8-1A6540FBB0A4 (resized).jpegQuoted from pinhead52:If i was home I could fix you up... I do have a set of pf plastics if you need any there.
Ken
I can wait for the lane guides!
My playfield plastics are in decent shape.
Unfortunately, the spinner on my Gottlieb Buccaneer has really taken its toll on the AS match relay. No amount of adjusting will make up for the slop in the fit between the armature plate and coil frame.
Does anyone have a good original armature plate (GTB-A14044) and armature frame (GTB-C8750) or a complete relay that they would sell? The arrows below point to the wear areas. The armature plate is out of stock at PBR.
Thank you!
Quoted from Gotemwill:Unfortunately, the spinner on my Gottlieb Buccaneer has really taken its toll on the AS match relay. No amount of adjusting will make up for the slop in the fit between the armature plate and coil frame.
Does anyone have a good original armature plate (GTB-A14044) and armature frame (GTB-C8750) or a complete relay that they would sell? The arrows below point to the wear areas. The armature plate is out of stock at PBR.
Thank you!
[quoted image]
Thanks for the help pinhead52 !
This thread is an incredible resource for keeping these old machines going. Thanks for all those who stand by ready to help.
Still looking for a correct Gottlieb AS/FS relay armature plate. Ad here:
https://pinside.com/pinball/forum/topic/wanted-em-gottlieb-as-fs-relay-part
130DD725-BCAE-4600-B22E-527F2CA32E83 (resized).jpeg8C8AC4CE-0A37-40C5-A4FF-48CE6D35E16E (resized).jpegI am in need of an Exhibit Supply 729F (18ohm) coil. See photos below. Any help would be greatly appreciated.
797360C7-4CCE-4A27-B101-4B0877FD55E5 (resized).jpeg
9DB834F9-FCF6-4CD6-9991-8331F613F372 (resized).jpeg
F84CB23F-5E4D-4A10-854E-540F06365F64 (resized).jpeg59BB5571-5F0B-4834-996F-2AFE3E0B7E91 (resized).jpeg
Quoted from Gotemwill:I am in need of an Exhibit Supply 729F (18ohm) coil. See photos below. Any help would be greatly appreciated.
[quoted image]
[quoted image]
[quoted image][quoted image]
Still looking.
https://pinside.com/pinball/forum/topic/wanted-exhibit-supply-relay-coil
Happened to see this Gottlieb “Play Again” replay reel on eBay. Never seen one before! Any idea what it was used on?
Looking for a Chicago Coin 2886 coil. See more info here:
https://pinside.com/pinball/forum/topic/wanted-chicago-coin-2886-coil
BF7129A9-154F-434B-87B0-BC909BE5D70B (resized).jpegI am looking for an original Chicago Coin 2886 coil.
More info in the ad here:
https://pinside.com/pinball/forum/topic/wanted-chicago-coin-2886-coil
Still looking for this Chicago Coin coil.
https://pinside.com/pinball/forum/topic/wanted-chicago-coin-2886-coil
CCD27689-6A2F-470A-B53E-0EE27AF1B523 (resized).jpegQuoted from vec-tor:You might have to have it made.
Did Steve Young's Pinball Resource have something to replace the coil.
Thanks!
Quoted from Billc479:Gottemwill - if you can't find an original, I suggest you go to your local hardware store and get a piece of stainless steel tubing.
Agree! It could be made. I just like original stuff.
Quoted from Gotemwill:I am looking for an old outside housing and backing nut for a cam lock. Should be about 1” long and approximately 1” diameter at the outer front ring. The inside needs to be as pictured to accept the tumbler.[quoted image][quoted image][quoted image]
Still looking! I know someone’s got a cool whip container full of these just sitting around!
Quoted from RacingPin:I have these two however the back is coded differently. Which do you want?
[quoted image][quoted image]
Mike V
Hello Mike,
I’ll take the one on the right. Looks like it matches mine perfect. Does the backing nut screw onto the threads ok?
I’ll PM you with my info. Thanks!
You're currently viewing posts by Pinsider Gotemwill.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-em-seeking-parts-thread?tu=Gotemwill and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.