Middle O' Oregon
Quoted from AlexF:Need a mid 60s Williams score reel for my Big Strike. Actually I only need the circuit board Part #B-6297 (marked 1B-2001-13).
I have these.
(Topic ID: 93586)
Linked Games
"300"
Gottlieb, 1975-
2001
Gottlieb, 1971
-
8 Ball
Williams, 1966
-
Abra Ca Dabra
Gottlieb, 1975
-
Amigo
Bally, 1974
-
Aquarius
Gottlieb, 1970
-
Atlantis
Gottlieb, 1975
-
Bank-A-Ball
Gottlieb, 1965
There are more than 8 games linked to this topic.
Click here to show all linked games
Click here to show all linked games
Topic Gallery
Quoted from feveredpinhead:Would anyone happen to have one of these lightsockets or similar? It's off a 1961 United shuffle targette game. Missing one for a score reel. I could probably make one out of a socket that has a long mounting bracket but I'd prefer a simple replacement if possible. [quoted image]
here's something very close, i bought 20 of of
http://www.surplussales.com/Bulbs-Incan-Panel/LampSockets.html
could send you 1 or 2
pasted_image (resized).pngQuoted from balzofsteel:I have these.
Awesome. PM sent.
Quoted from beadwindow:Looking for a metal post like the one pictured for a 1969 Bally Op Pop Pop.
Was hoping to find it in the bottom of the cab but no joy.
I don’t have the part number and I’ve found some that seem pretty close from the parts stores but they don’t list the diameter which is .150”
Also interested in playfield plastics for this machine as well.
Thanks.[quoted image][quoted image]
I have one of those for sure and a few plastics but most are beat up and busted...I have to check to make sure... which ones do u need?
Quoted from pinhead52:I need a 70s GTB chime unit, have a Mondail export game, currently has a Bally chime, should somebody need a Bally chime unit, I have an extyra.
im fixed up
I am looking for a coin door for a 1976 Gottlieb Card Whiz. Preferably in good condistion, but would consider one with small amount of rust.
Forgot to add that an incomplete coin door will work as long as it has the front skin. I have all the mechs and wiring for the door.
Thanks
Quoted from Coyote:Is anyone interested in this coin counter?
It's from the very early '70s, ran off of 24v, and came out of a Rowe PhonoVue.
$10 and shipping. Send me a PM.[quoted image][quoted image]
Bump, anyone?
Quoted from Tyamry:I am looking for an Coin Door like the one pictured for a 2 player EM.
[quoted image]
boy that is pretty rough for sure.. are the guts still in there?
if you can not find one let me know i will make you one from a SS one i have
Newmarket, ON
Quoted from Tyamry:It's an SS door that I was going to buy but didn't. I have a nicer one coming but was hoping to find an EM.
Dave, thanks for the offer!
i am almost 100% sure that the em and ss doors are exactly the same minus the wiring ends
Quoted from BleacherBum:Still looking for a coin door for my 1976 Gottlieb Card Whiz (OP 4910). Attached is a picture of the door that I am looking I am wanting to buy.
Thanks!
[quoted image]
This one is on eBay today. Auction ends in 14 hours.
DCD60CB8-43B4-4E74-9DF8-BA6F56424563 (resized).pngQuoted from tscottn:Looking for a Hundreds Unit decagon Score reel for a 74 Sky Jump. Just the reel itself is needed but would take the entire housing too if you have it.. PM please.. thanks
Quoted from Mikala:This one is on eBay today. Auction ends in 14 hours.[quoted image]
wrong door, he needs the big sq one
Quoted from boilerman:you need just the plastic reel? or the complete 100 unit with all parts? i am sure i have one complete unit
I really just need the plastic number reel if you are able to do that
Quoted from tscottn:I really just need the plastic number reel if you are able to do that
i can, pm me
Quoted from boilerman:i can, pm me
done thanks
Looking for 2 Williams flipper coil stands with 4 holes each in them, I have 66 which has 2 holes and I don't feel like drilling. Thanks.
Quoted from phil-lee:Looking for 2 Williams flipper coil stands with 4 holes each in them....
I think I can dig a couple of these out.
Does anyone have any leads on a source for wiper fingers for Gottlieb stepper units (part number A-306)? These are the 0.023” thick ones and apparently are sold out at Pinball Resource (see link below). I searched for them with the googly and saw that Marcos and a few European sites list them but that they are out of stock at these suppliers too (also see below).
I have several on a couple different steppers of Gottlieb’s Three Musketeers that are worn flat with sharp corners instead of curved edges. Although they are functioning well currently, they are gouging grooves into the rivets and boards of the steppers. It appears that attempts to file the sharp corners will remove the outer edges that hold the wiper finger springs and so replacement of the wiper fingers seems to be the best option to avoid further damage.
Thanks for any help!
Quoted from tfduda:Does anyone have any leads on a source for wiper fingers for Gottlieb stepper units (part number A-306)? These are the 0.023” thick ones and apparently are sold out at Pinball Resource (see link below). I searched for them with the googly and saw that Marcos and a few European sites list them but that they are out of stock at these suppliers too (also see below).
I have several on a couple different steppers of Gottlieb’s Three Musketeers that are worn flat with sharp corners instead of curved edges. Although they are functioning well currently, they are gouging grooves into the rivets and boards of the steppers. It appears that attempts to file the sharp corners will remove the outer edges that hold the wiper finger springs and so replacement of the wiper fingers seems to be the best option to avoid further damage.
Thanks for any help!
http://www.pbresource.com/springkit/gtb-a7291.jpg
https://www.marcospecialties.com/pinball-parts/A-306
how many do you need?
Quoted from boilerman:how many do you need?
Five are badly worn. Two I haven’t touched given how little metal is left on the edge that contacts the rivets. I did file the corners of the other three—there’s just enough of an overhang on these to hold the spring and just enough of a curved edge to not continue to damage the rivets and board, but I am not sure how long they’ll last.
Quoted from tfduda:Five are badly worn. Two I haven’t touched given how little metal is left on the edge that contacts the rivets. I did file the corners of the other three—there’s just enough of an overhang on these to hold the spring and just enough of a curved edge to not continue to damage the rivets and board, but I am not sure how long they’ll last.
so you need seven?
Quoted from boilerman:so you need seven?
Sorry for my confusion. I really just need five--these will replace the ones that are badly worn.
Quoted from tfduda:Sorry for my confusion. I really just need five--these will replace the ones that are badly worn.
let me see what i can dig up
Quoted from tfduda:Thanks much for checking!
found 5, do you need the springs also? pm me your info
Quoted from boilerman:found 5, do you need the springs also? pm me your info
Wow—cool! Will pm now. Thanks!!
Quoted from phil-lee:Looking for 2 Williams flipper coil stands with 4 holes each in them, I have 66 which has 2 holes and I don't feel like drilling. Thanks.
Quoted from balzofsteel:I think I can dig a couple of these out.
Update: They're dug.
Frankston
Quoted from Budgiecougar:Hi Guy's,
I am after a ball gate for an El Dorado, doing a restore on one and this part is missing and no one seems to be making them. Any help sourcing one would be greatly appreciated. I am located in Australia.
Photo?
Quoted from ZNET:Photo?
i am thinking he is taking abouth these, but the are available as far as i know
https://www.marcospecialties.com/pinball-parts/A-18469
large (resized).JPGQuoted from boilerman:i am thinking he is taking abouth these, but the are available as far as i know
https://www.marcospecialties.com/pinball-parts/A-18469
[quoted image]
I likely have these.
Quoted from boilerman:i am thinking he is taking abouth these, but the are available as far as i know
https://www.marcospecialties.com/pinball-parts/A-18469
[quoted image]
The ball gate on El Dorado is different.
This is what he needs but PBR says they are out.
http://www.pbresource.com/gtbsd/gtb-a15550.jpg
Quoted from balzofsteel:Update: They're dug.
I apologize balzofsteel, looking for a pm from someone and didn't see your post, got in a hurry and drilled the old ones. If you ever need parts I may have will make it up to you.
Quoted from MikeO:The ball gate on El Dorado is different.
This is what he needs but PBR says they are out.
http://www.pbresource.com/gtbsd/gtb-a15550.jpg
I think that I have that alternative style arch gate as well.
Quoted from MikeO:The ball gate on El Dorado is different.
This is what he needs but PBR says they are out.
http://www.pbresource.com/gtbsd/gtb-a15550.jpg
If it’s the same one that’s on Surfer I got it. Just checked, it isn’t.
Hello All:
Working on a Gottlieb Spirit of 76 and while cleaning the score reels I lost this part. As I do not have a parts catalog I am unable to identify it. Can anyone tell me if these are avaiilable? If not at least maybe a work around for it. It would also be helpful to have a part name and number for it.
Thanks
Mike
20190325_121120 (resized).jpgQuoted from packie1:Hello All:
Working on a Gottlieb Spirit of 76 and while cleaning the score reels I lost this part. As I do not have a parts catalog I am unable to identify it. Can anyone tell me if these are avaiilable? If not at least maybe a work around for it. It would also be helpful to have a part name and number for it.
Thanks
Mike
[quoted image]
yea I have a bunch (PBR probably has them as well) my name would a reel washer etc, helps to hold the wiper on to the reel shaft.
my parts catalog labels it a c-9167
Promoted items from Pinside Marketplace and Pinside Shops!
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
