Looking for a manual and schematic for a 1972 Chicago Coin "Home Run" pitch and bat.
Quoted from Blutarsky:My GTB '64 North Star is in search of a 0-9 Unit stepper. Anyone have one of that era?
not the same game but close?
https://www.facebook.com/PreservationPinballParts/photos/a.388902247900637/389700151154180/?type=3&theater
Quoted from Theo_Ioannis:I'm looking for a 50HZ Score Motor B-11550 and a 115-230V Transformer B-8091
or a 230V only B-16722
I have a Californian address
Thanks
You might try this guy, curious in that he posted to a NY CL while the address is near LA??? Thanks Vic!
Quoted from beadwindow:Found a bell.
Recently picked up a very dirty but very cool 1970 Williams Strike Zone. There was no way to clean the 8 score reels without removing the too much paint on several numbers. So if anyone has eight reels in nice shape, I'm interested-seems like a good candidate for somebody to make decals.
You can find a zip file containing both .pdf and .docx templates for decals at: http://www.pinballrebel.com/pinball/cards/Williams/Williams_Score_Reel_Numbers.zip
Quoted from Alan_L:Looking for a manual and schematic for a 1972 Chicago Coin "Home Run" pitch and bat.
I sent you a PM.
Quoted from dfrazer:You can find a zip file containing both .pdf and .docx templates for decals at: http://www.pinballrebel.com/pinball/cards/Williams/Williams_Score_Reel_Numbers.zip
Use the .pdf file!
It will have the right font.
If you use the .docx file the numbers will look different.
The .docx file is pure for backup purpose or in some cases when you would like to change score levels.
Peter
http://www.inkochnito.nl
I found that on my computer the pdf file prints the wrong size.
I use the doc.x file and fool with the size until it is correct out of the printer.
Quoted from DCRand:Anyone have Plastic / nylon shooter rod housing for 1971 Williams Doodle Bug?
[quoted image]
try this out
https://www.marcospecialties.com/pinball-parts/3B-7160-T
Quoted from PinballAir:I found that on my computer the pdf file prints the wrong size.
I use the doc.x file and fool with the size until it is correct out of the printer.
Are you sure it isn't scaling it or something?
Just asking.
Thanks, I had looked at Marco, but searched for "Doodle Bug" parts, and that didn't come up. Thanks again, went ahead and ordered from Marco, as needed other parts anyway.
Quoted from DCRand:Anyone have Plastic / nylon shooter rod housing for 1971 Williams Doodle Bug?
[quoted image]
If you don’t want the repro Marco sells, I have an original. PM sent.
Quoted from pinhead52:You might try this guy, curious in that he posted to a NY CL while the address is near LA??? Thanks Vic!
newyork.craigslist.org link
I hit reply button.....it says "An error has occurred. Please try again later"
Thanks for the heads up!
I feel like I may have asked this before....but I'm revisiting my Jet Spin project....and I'm either missing or have broken most of the white plastic guides/brackets for the score reels. Any idea where to find these?
Both top and bottom guides are damaged in most cases.
IMG_20190205_201301043 (resized).jpgQuoted from Vic_Camp:I need just the left clear plastic that’s underneath the left upper plastic. Thanks
[quoted image]
vic, i have that part but i'm in australia, replaced my entire set with repro pinball rescue ones.
happy to send, just pm me your mailing address.
Quoted from ejacques:I feel like I may have asked this before....but I'm revisiting my Jet Spin project....and I'm either missing or have broken most of the white plastic guides/brackets for the score reels. Any idea where to find these?
Both top and bottom guides are damaged in most cases.
[quoted image]
I hit up ebay and buy these... I could probably source 1 or 2 of these. and I just use #2 hardware to reinstall rather than rivet. The top do not have the retaining tabs...
What search term do you use? I'm not even sure what to call them.
Quoted from pinhead52:I hit up ebay and buy these... I could probably source 1 or 2 of these. and I just use #2 hardware to reinstall rather than rivet. The top do not have the retaining tabs...
Quoted from ejacques:What search term do you use? I'm not even sure what to call them.
i did a search for gottlieb cage and it returned this
ebay.com link: Gottlieb pinball machine SCORE REEL BRACKET cage style wt retainer reel clip
Im sure there is more gottlieb reel gave me this one
I am looking for a set of original replay cards for a ‘65 Gottlieb Bank-A-Ball. These are the full size cards with two sets of replay scores on them on opposing sides of the card.
Quoted from hoov:Looking to buy a coin entrance housing for a Gottlieb recessed coin door ('76-'83) for a Jack's Open project I'm working on.
Have parts to trade too.[quoted image]
Maybe, will check tonight
Quoted from Vic_Camp:I am looking for an original instruction card for this 1967 Gottlieb Super Score I just picked up or a good repro instruction card would work too. Any other cards available for this 2 player Gottlieb..I would be interested in them also.
Thanks
[quoted image][quoted image]
on a roll vic, i am certain that i have a nos set. will check after work and report back
Quoted from illawarra92:on a roll vic, i am certain that i have a nos set. will check after work and report back
This is getting scary...Thank you so much!
Quoted from dfrazer:You can find a zip file containing both .pdf and .docx templates for decals at: http://www.pinballrebel.com/pinball/cards/Williams/Williams_Score_Reel_Numbers.zip
I have them, sent you a message.
Quoted from ejacques:I feel like I may have asked this before....but I'm revisiting my Jet Spin project....and I'm either missing or have broken most of the white plastic guides/brackets for the score reels. Any idea where to find these?
Both top and bottom guides are damaged in most cases.
[quoted image]
I have original ages with good solid guides on them. Sent you a message.
Quoted from hoov:Looking to buy a coin entrance housing for a Gottlieb recessed coin door ('76-'83) for a Jacks Open project I'm working on.
Have parts to trade too.
[quoted image]
Have one if you're still looking
Quoted from paintpins:Have one if you're still looking
Too-many-pins is sending me one - thanks for the offer though.
Quoted from Gotemwill:I am looking for a set of original replay cards for a ‘65 Gottlieb Bank-A-Ball. These are the full size cards with two sets of replay scores on them on opposing sides of the card.
I have a reproduction file on my website http://www.inkochnito.nl
Look in the Gottlieb section.
There are only two cards in the file.
One with match and one without match.
The score levels are included in the card.
If you want seperate score cards, let me know and I'll add them to the file.
Peter
Quoted from Vic_Camp:I am looking for an original instruction card for this 1967 Gottlieb Super Score I just picked up or a good repro instruction card would work too. Any other cards available for this 2 player Gottlieb..I would be interested in them also.
Thanks
[quoted image][quoted image]
I have those reproduction cards on my website too.
Even the relay strip labels are available.
Look in the Gottlieb section.
Peter
http://www.inkochnito.nl
If you like my work, please send me a donation via PayPal.
I am looking for the size of the bell in my target pool.
Its missing and I talked to PBR and he said the schematic doesn't specify the size so he needs me to tell him. Can anyone with a Target Pool measure the bell in the lower left and tell me what size it is? the two that are there are 3" and 5"
Target Pool Back (resized).jpgQuoted from Inkochnito:I have those reproduction cards on my website too.
Even the relay strip labels are available.
Look in the Gottlieb section.
Peter
http://www.inkochnito.nl
If you like my work, please send me a donation via PayPal.
Thank you Peter
It is a 3" bell.
Go to this link to view.
https://www.ipdb.org/showpic.pl?id=2502&picno=39683
Quoted from Vic_Camp:It is a 3" bell.
Go to this link to view.
https://www.ipdb.org/showpic.pl?id=2502&picno=39683
I'm curious why they installed a pair of 3" bells rather than just wire up whatever drives them to one 3" bell. Maybe the two bells have a slightly different tone, but it seems like a luxury.
One bell is a thicker brass and the other bell is a thinner greyish - black metal. Thickness and different metal gives a different sound.
The ding-ding-ding when you hit the moving arrow for 300 points (thicker brass bell) is addicting.
Quoted from Vic_Camp:It is a 3" bell.
Go to this link to view.
https://www.ipdb.org/showpic.pl?id=2502&picno=39683
thanks! now to see if PBR has one.
Quoted from mark532011:I am looking for the size of the bell in my target pool.
Its missing and I talked to PBR and he said the schematic doesn't specify the size so he needs me to tell him. Can anyone with a Target Pool measure the bell in the lower left and tell me what size it is? the two that are there are 3" and 5"[quoted image]
paintpins just sent me a message this morning saying he has 3” bells.
Quoted from hoov:One bell is a thicker brass and the other bell is a thinner greyish - black metal. Thickness and different metal gives a different sound.
The ding-ding-ding when you hit the moving arrow for 300 points (thicker brass bell) is addicting.
Yea, that 5 inch bell has a really nice ring to it, Crosstown too, almost think you are on the subway/trolley
Quoted from mrm_4:paintpins just sent me a message this morning saying he has 3” bells.
Quoted from ejacques:I feel like I may have asked this before....but I'm revisiting my Jet Spin project....and I'm either missing or have broken most of the white plastic guides/brackets for the score reels. Any idea where to find these?
Both top and bottom guides are damaged in most cases.
[quoted image]
pinjunk saw your bat signal for guides
ebay.com link: Gottlieb Decagon Score Reel Retainers Slides B 10808 B 10809 Nylon Guides
I bought a set just to have on hand. And I use #2 hardware with a little locktite to remount them
https://www.boltdepot.com/Machine_screws_Phillips_pan_head_Stainless_steel_18-8_2-56.aspx
Quoted from Inkochnito:I have a reproduction file on my website http://www.inkochnito.nl
Look in the Gottlieb section.
There are only two cards in the file.
One with match and one without match.
The score levels are included in the card.
If you want seperate score cards, let me know and I'll add them to the file.
Peter
Thanks Peter! Sure wish I could find old card stock that matches the look of the originals.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-em-seeking-parts-thread/page/97 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.