Thank you sir.
Quoted from pinhead52:If this is GTB EM, they are more like 1 1/2 or 1 5/8s
Fraid Knot.....It's for a CC
I need the arch plate on the top of the pf, I need one that has the holes for the arch lamps.
condition can be rusty to nice
Quoted from boilerman:I need the arch plate on the top of the pf, I need one that has the holes for the arch lamps.
condition can be rusty to nice
I has one to spare. Need any coin plates? I just had 14 re-chromed
Quoted from pinhead52:I has one to spare. Need any coin plates? I just had 14 re-chromed
thanks ken.. PM me
I'm good on the coin plates
Quoted from TomT:Looking for a Williams Hot Tip pop bumper cap
I'm having trouble finding a good picture of one, but is it a translucent red cap with a small white bullseye in the center? I may have one (possibly two).
So, I just finished my first EM restore and I've got some extra stuff laying around that I'm not sure I should keep. I've got limited space so I'm curious if any of this stuff is worth saving, all from a 1972 Williams Swinger:
Old pop-bumper yokes:
Old nylock nuts:
Old Flipper parts:
They've all been replaced with new stuff, so I'm thinking of tossing all of it. However, I've benefited from this thread in the past so I figured I'd ask around first.
I generally like to save anything that isn't broken. If your averse to clutter I'd at least recommend saving those metal pop bumper yokes. You often find them broken so it's nice to have some spares on hand.
The yokes, defiantly save. If those nylocs have been used, I'd probably throw them out.
As far as the flipper parts, it's kind of hard to tell without seeing them up close, but the pawls are probably keepers.
Looking for any scrap flippers from any game. Just trying to make some trophies, so surely someone has some junked ones laying around somewhere..... PM me please!
Quoted from pinhead52:got you covered
Thanks again for the parts Ken. It was fun playing your games today too.
Ken
Happy New Year parts lovers!
Selling the following parts from a '75 GTB Super Soccer:
PARTS AVAILABLE:
Lower cabinet and associated parts (see below already sold), motor board and parts, and complete head (see below already sold) - has poor backglass.
PARTS ALREADY SOLD
Cabinet:
Playfield (populated)
Legs
Coin door, strike plate, and coin entrance housing
Lockdown bar
Chime unit
Head:
Back door
Red wooden bonus balls
Match unit mini-stepper
Still looking for decent - nice populated playfields for a Big Indian/Big Brave, High Hand, and Golden Arrow.
Cleaning up the parts stash a bit I ran across this piece I can't ID. I suspect it's a coin slide housing, but I've no idea what it goes to. Has an 'S' stamped on it ('Stoner' perhaps?).
Anyone know what it might go to? Anyone need it? (I don't.)
I need a set of plastics , or scans of the Playfield plastics for a Gottieb Hit N Run Woodrail. Any help would be greatly appreciated.
Quoted from DirtFlipper:Cleaning up the parts stash a bit I ran across this piece I can't ID. I suspect it's a coin slide housing, but I've no idea what it goes to. Has an 'S' stamped on it ('Stoner' perhaps?).
Anyone know what it might go to? Anyone need it? (I don't.)2016Jan02_001_(resized).JPG2016Jan02_002_(resized).JPG2016Jan02_004_(resized).JPG2016Jan02_003_(resized).JPG
I believe that goes to a monarch coin slide:
3holemech_(resized).jpg
Quoted from girloveswaffles:I believe that goes to a monarch coin slide:
3holemech_(resized).jpg
http://www.crowriver.com/ps/coinslides2.htm
Right (or probably even an ABT - any style with the three mounting holes), but what does the housing go to? It would have been used to mount the coin slide into a cabinet, but what cabinet?
Quoted from DirtFlipper:Right (or probably even an ABT - any style with the three mounting holes), but what does the housing go to? It would have been used to mount the coin slide into a cabinet, but what cabinet?
Not sure, but I've seen that same style 3 hole acceptor on arcade games (not pins) from Exhibit Supply, Mutoscope and Munves games although without the housing.
Quoted from girloveswaffles:I'm having trouble finding a good picture of one, but is it a translucent red cap with a small white bullseye in the center? I may have one (possibly two).
Its red with a center white bullseye and diamonds around the rim I'll get a pic.
Quoted from TomT:I need a late Williams em knocker the one in my Hot Tip is missing.
This one should be about the same as your missing one.
ebay.com link: STAR POOL 74 WILLIAMS PINBALL MACHINE FREE GAME SLAMMER KNOCKER MECHANISM
Ken
Quoted from TomT:Its red with a center white bullseye and diamonds around the rim I'll get a pic.
I have one that's red with a white bulls-eye, but no diamonds. If you want it it's yours. Just PM where to send it.
Quoted from DropTarget:anyone have a spare GTB chime unit?
There are several on ebay right now, here's one for $54
ebay.com link: VINTAGE GOTTLIEB 3 CHIME UNIT FOR EM ELECTROMECHANICAL PINBALL MACHINE
Quoted from pinhead52:There are several on ebay right now, here's one for $54
I saw that. ty
Quoted from TomT:I need a late Williams em knocker the one in my Hot Tip is missing.
I may have one. Just have to dig through a couple boxes.
I just picked up a Williams Jig Saw, and it's missing some pieces on the apron. If anyone has the metal frames for the business card holder or the score card holder (see photo), I would appreciate hearing about it.
Also, is anyone reproducing that "Balls Played" decal, or am I on my own for making one?
Gang, I got way too many GTB coin plates rechromed recently. I have 5 double entry, 4 triple entry plates, the doubles Im offering at $20 each, the triples $15 each plus about 10 for shipping. I also have a couple of the top bars. I also have a couple of the 70s style
Note these are done to a mirror finish, no grain (like PBR).
PM me if you need any.
Quoted from illawarra92:looking for a real nice set of plastics for a gottlieb oklahoma 1961
bump..still looking for these.
Quoted from MarkG:I'm looking for a few old style EM white pop bumper bodies (with the open sides) and a 1" round violet with marbled white insert as shown below. Both are for a Gottlieb game but other manufacturers might work.
Thanks,
/MarkOld_PB_Body_sm_(resized).jpg
i have tons of those bodies but can't help on the insert.
pm me
I'm looking for a lockdown bar for a Gottlieb woodrail (Telecard) and would rather not pay the $100 to get an unfinished repro from PBR. If anyone has one they're willing to part with, drop me a PM.
Quoted from MarkG:I'm looking for a few old style EM white pop bumper bodies (with the open sides) and a 1" round violet with marbled white insert as shown below. Both are for a Gottlieb game but other manufacturers might work.
Thanks,
/MarkOld_PB_Body_sm_(resized).jpg
I'm pretty sure Gottlieb never manufactured those skirts. They used existing skirts and cut them out by hand at the factory. That might be the best way to go there.
Quoted from jjpm:I'm pretty sure Gottlieb never manufactured those skirts. They used existing skirts and cut them out by hand at the factory. That might be the best way to go there.
Doesn't PBR carry them?
Need a Fast Draw/Quick Draw long plastic shield from the left side of the playfield.
I know PBR has the set for $80 but I thought I'd try this first since only one is bad. I'm hoping someone bought a set from PBR and maybe had this one in good condition.
Also need a plastic shield that sits on top of the drop target bank on Big Indian/Big Brave
This is B14956
Quoted from o-din:I need a bell clapper and arm
Is that just a switch blade riveted to the armature plate, then with a metal spacer screwed to the end of the blade? If you have the armature plate, might consider just making one.
It's missing the plate too and I don't have too many extra parts as I've never parted one out yet and there are no pinball bone yards around here that I know of.
A clock repair shop should be able to fix you up with a striker that would work.
Here's a couple from a clock supply place (the same place you can get replacement bells):
http://timesavers.com/i-8948457-brass-french-clock-bell-hammer.html
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-em-seeking-parts-thread/page/38 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.