Quoted from RacingPin:I have this one:
[quoted image][quoted image]
Have a couple of other parts for the door
Mike V
Pm sent
Quoted from RacingPin:I have this one:
[quoted image][quoted image]
Have a couple of other parts for the door
Mike V
Pm sent
Quoted from Flipsteen:I have the one pictured but need another one for a Williams Rocket I'm restoring. Thanks.
[quoted image]
i can get you a paint stencil, see if pbr will give you an unassembled blank.
Quoted from pinhead52:i can get you a paint stencil, see if pbr will give you an unassembled blank.
PBR has a green daisy cap but looking for an original with the green tone of the original.
Looking for complete Gottlieb coin door for 1977 Lucky Hand complete to Jones plug. Harness is what’s needed most.
I am working on a 1948 Chicago Coin Crazy Ball machine and am looking for the following items that were used in this and other mid to late 40s and possibly early 50s CCM machines.
O-273 coil (used with plunger to ring bell and has mounting hardware for coil directly attached to coil):
O273 (resized).jpg
Coin door-mounted counter assembly or just the X-298 coil that goes in relay:
counter (resized).jpg
X298 (resized).jpg
Relay on coin door used with coin slide (mounted with the bottom two screws of the coin slide):
slide_relay (resized).jpg
Thanks for any help!
Hey everyone, I am working on a 1969 Bally on beam, on the space station unit, a coil was removed. Got a replacement coil, found the plunger under the bottom board, but I am still missing the coil stop. Anyone have a Bally coil stop they can offer me?
Looking for a mid 60's Gottlieb lockdown bar, for a Kings&Queens. I have the replacement endcaps so dont need anything pretty.
Ken
Anyone have an extra plastic for Vulcan/Fire Queen that goes over the white drop targets? Whole set or just the one plastic would be fine. N.O.S. set would be the ultimate
Thanks!
Quoted from Phillips88:Anyone have an extra plastic for Vulcan/Fire Queen that goes over the white drop targets? Whole set or just the one plastic would be fine. N.O.S. set would be the ultimate
Thanks!
I have a scan of mine, although with small crack, if you wanted to make one for it.
Looking for a backglass for a 1966 Bally "Gold Rush".
Very good to excellent condition
Thanks for checking.
Alan
Quoted from Alan_L:Looking for a backglass for a 1966 Bally "Gold Rush".
Very good to excellent condition
Thanks for checking.
Alan
Hah! You scored that one from @kickout, huh? It looked very decent, and complete except for the glass. Nice nab. Does BGR have the file?
Quoted from jrpinball:Does BGR have the file?
Yes, but I'm looking at $400 shipped. Just trying to find one cheaper. Playfield is beautiful.
Quoted from Alan_L:Yes, but I'm looking at $400 shipped. Just trying to find one cheaper. Playfield is beautiful.
Try posting in the looking for backglass forum.
Quoted from bluespin:Try posting in the looking for backglass forum.
Didn't know there was one. I'll check it out. Thanks.
Looking for Tar Pit system for FMBC (Four Million B.C.), it is missing.
It is the 3 step system, but the 4 step system from a Capersville could work also...
Quoted from wizardblom:Looking for Tar Pit system for FMBC (Four Million B.C.), it is missing.
It is the 3 step system, but the 4 step system from a Capersville could work also...
I think I might have you covered my friend. Straight out of a 4MBC. Just pay shipping.
Quoted from Murphdom:I think I might have you covered my friend. Straight out of a 4MBC. Just pay shipping.
I am looking for an older (late 40s or early 50s) Chicago Coin stepper unit or simply the finger assembly to repair a broken assembly/fingers on a stepper of a 1948 CCM machine (Crazy Ball). Thanks for any help!
I spoke too soon--this is no longer needed--used a few switch blades and rivets to repair it.
Quoted from vec-tor:What's the KIKER?
I knew I’d get a hard time. The plastic to the right and left of the flippers. Sometimes I hear it call the kicker, sometimes I hear it called, a slingshot.
Quoted from mojonitro:I'm looking for the yellow sunburst style pop bumper cap that says "5 POINTS SPIN". It's for a Masquerade.
[quoted image]
PBR has them, part number is “Yellow SUN “5 Points Spin””
Anyone got a reworked spare decagon score reel for the 10's digit in Bank-A-Ball? Or one that needs reworked? I need to rebuild the one in mine but I would like to swap in a good clean reworked unit and keep it running while I rework the old one. Currently I have no spare extra reels at all, just the flailing originals, and I'm getting pissed at those.
Quoted from Bublehead:... decagon score reel for Bank-A-Ball....
Coulda swore it has rat traps.
But no kikers - that's probably a CCM thing.
The question should be does anyone have some of those awesome WICO woodgrain bumper thingies.
And would they still stick?
Okay that's a couple questions.
It looks like the plunger for a manual ball lift mechanism like this one:
https://www.funwithpinball.com/exhibits/small-boards-page-2#BallLifter
Quoted from GraniteStatePin:Sorry if this is not the place for this but figured it might be a good place for info. I have these kits that came in an old parts lot. Anybody know what they are for and/or a value? Any info helps, thanks
[quoted image][quoted image]
Yea somebody was looking g for one... if you have several I'd take one, I have a slickchixk to restorr
Quoted from MarkG:It looks like the plunger for a manual ball lift mechanism like this one:
https://www.funwithpinball.com/exhibits/small-boards-page-2#BallLifter
Thanks for the reply Mark, I figured that's what they were but have no experience with that era of games so didn't know if they were generic or brand/model specific. Great link btw!!!
PM sent pinhead52
I've got a United Midget Alley in the shop for repair at the moment.
Is there a source for these NOS or used original balls, or an excellent replacement to order? It is missing one of the 2 balls it should have.
It would be nice if this Midget had a pair
If anyone needs some part specific photos or some info on this game let me know and I'll do my best to help you out with what you need.
Quoted from Dono:Seeking coin entry for a Gottlieb Woodrail similar to this game. Scrambling to get this game (Globe Trotter) ready for Allentown. Let me know whatcha got thank you in advance.
[quoted image]
Hi All need help with a Chicago coin mini-baseball
I’m looking for the relay board and sound board
Part numbers 409-2526 and 405-300 I attached a picture of the relay board and the sound board
I borrowed the sound board pic from the mini-baseball thread
Thanks
Jim
Quoted from Liftserv:Hi All need help with a Chicago coin mini-baseball
I’m looking for the relay board and sound board
There may be some leads at:
https://pinside.com/pinball/forum/topic/chicago-coin-mini-baseball-sound-amplifier-405-300
Quoted from MarkG:There may be some leads at:
https://pinside.com/pinball/forum/topic/chicago-coin-mini-baseball-sound-amplifier-405-300
Thank you @markG
That is very helpful
Jim
Quoted from Liftserv:Thank you MarkG
That is very helpful
Jim
I fixed my sound board by replacing all the caps. Worked like a charm!
Need an Alternator unit for my williams gun game 1968 era. I included a couple pics. Mine is missing . Not sure if this was only used in some gun games or other games. This may be the wrong place to post this. 3rd pic us mine. Thanks
Screenshot_20230421-215340_Chrome (resized).jpgScreenshot_20230422-174744_Chrome (resized).jpgreceived_6000410963375812 (resized).jpegWanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-em-seeking-parts-thread/page/193?hl=flipsteen and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.