needed:
1 backbox metal door (hopefully w/key & lock)
Bally Night Rider EM
26" H x 28" W
(Topic ID: 93586)
Linked Games
"300"
Gottlieb, 1975-
2001
Gottlieb, 1971
-
8 Ball
Williams, 1966
-
Abra Ca Dabra
Gottlieb, 1975
-
Amigo
Bally, 1974
-
Aquarius
Gottlieb, 1970
-
Atlantis
Gottlieb, 1975
-
Bank-A-Ball
Gottlieb, 1965
There are more than 8 games linked to this topic.
Click here to show all linked games
Click here to show all linked games
Topic Gallery
San Leandro, CA
Quoted from TheCnyPinGuy:Morning
Seeking a GTB NorthStar Backglass
Used but presents well is fine with me if maybe you saved the original and got a reproduction
Message Me
Thanks
James
[quoted image]
Hmm. That photo looks familiar.
Quoted from jrpinball:Hmm. That photo looks familiar.
I googled North Star Pinball 
9A252DAD-5AE0-4BB9-B31B-D818B9E31928 (resized).jpegQuoted from TheCnyPinGuy:I googled North Star Pinball [quoted image]
That was my brother's game at York a few years ago. The "Sky Line" was mine, and the Heat Wave" to the right was brought by John Patterson.
Quoted from jrpinball:That was my brother's game at York
well at least we all have Frank's phone number now.
Quoted from DropTarget:well at least we all have Frank's phone number now.
He did sell the game though.
Quoted from undrdog:Was thinking of that.
Use the laydown sockets and bend the tab flat, a lot sturdier then the staple sockets.
Quoted from pinhead52:Use the laydown sockets
Thanks for the tip! I’ve got a bag of them.
Quoted from undrdog:Light bar needed. 1971 Gtb - Drop A Card. The balls in play & Game Over lights are in the apron.
[quoted image]
Id use yopsicles
Quoted from undrdog:Light bar needed. 1971 Gtb - Drop A Card. The balls in play & Game Over lights are in the apron.
[quoted image]
You might try led pcbs https://www.pinballlife.com/classic-bally-stern-insert-led-pcb.html. Cheaper than new sockets..
Just as Yopsickles are not well suited for light boards behind the backglass, I don’t think they’d shine up far enough for this.
I’ve got new sockets and don’t expect incandescents to be a problem with them. I’m still new at this, but I suspect that folks who have problems with incandescents keep tinkering with old sockets.
Quoted from illawarra92:looking for the 2 wireforms that are to the left and right of the flippers for a gottlieb Baseball from 1970
know i can make them but would like the originals[quoted image][quoted image]
I have these pm me.
Quoted from undrdog:Nasty old lightbar replaced with new sockets.
And I finally got to use my new electric stapler .
[quoted image]
Those werent laydown but close enough... use what you have on hand.
Never heard the term before. Looked it up and that's what was pictured. Before I unbent them.
And here I thought for sure someone would get on me for using stripped wire instead of braid for the common. But, no, I got the socket wrong. Alas!
Quoted from undrdog:Never heard the term before. Looked it up and that's what was pictured. Before I unbent them.
And here I thought for sure someone would get on me for using stripped wire instead of braid for the common. But, no, I got the socket wrong. Alas!
all good. Here's the laydown from pbr web site
pasted_image (resized).pngQuoted from pinhead52:all good. Here's the laydown from pbr web site[quoted image]
You didn’t list the part number! Steve would be very upset with you.
Quoted from undrdog:Where do folks get their wire braid? PBR or an electronics supply? What gauge ?
Both PBR, and a few people have sold it here on pinside.
https://pinside.com/pinball/market/shops/1041-third-coast-pinball/00662-18ga-stranded-tinned-bare-wire
Quoted from Beatnik-Filmstar:Both PBR, and a few people have sold it here on pinside.
https://pinside.com/pinball/market/shops/1041-third-coast-pinball/00662-18ga-stranded-tinned-bare-wire
Here's my latest source tin plated 18 awg
https://www.antiquelampsupply.com/tin-plated-copper-ground-wire-18-awg.html
I believe they no longer sell it. I tried to order some 2 months ago and Steve said it wasn't worth it. They are understaffed and he is already working longer hours. I got mine from the above-mentioned Lamp supplies Company.
Post here if you find a cheaper source.
https://wirebot.xyz/collections/other-wire
note there are discounts when you buy lengths, eg: 25feet gets 10% off
I need the rear door for a Gottlieb 70's wedgehead. I remember seeing a post in the last Pinfest thread about someone bringing a bunch of new ones to the show. Anybody know who that was? I rather not read thru 45 pages of posts.
Quoted from tomdrum:I need the rear door for a Gottlieb 70's wedgehead. I remember seeing a post in the last Pinfest thread about some bringing a bunch of new ones to the show. Anybody know who that was? I rather not read thru 45 pages of posts.
Ive got the contact, will pm you
Just won a parts Target Alpha Head in an online auction.
I won this and a project King of Diamonds. The auction stipulates a small window to collect items won - Thursday afternoon Aug 11 in Upper Black Eddy, PA
I CAN make the window from here 500 miles away but if anyone is interested I'd offer up the Target Alpha Head in exchange for grabbing the KOD and hanging on to it until I can come collect it in the coming week or two.
Capture (resized).JPGCapture1 (resized).JPGDoes PBR stock these plastic score reel holders?
I'm assuming not since Marco never had them.
In need of a few of these for...well...several games actually if anyone has some used ones.
Quoted from John_in_NC:Just won a parts Target Alpha Head in an online auction.
I won this and a project King of Diamonds. The auction stipulates a small window to collect items won - Thursday afternoon Aug 11 in Upper Black Eddy, PA
I CAN make the window from here 500 miles away but if anyone is interested I'd offer up the Target Alpha Head in exchange for grabbing the KOD and hanging on to it until I can come collect it in the coming week or two.[quoted image][quoted image]
Is there a Head/Body match-up thread anywhere? I have seen many missing one or the other.
Edit: found it
https://pinside.com/pinball/forum/topic/em-heads-needed-heads-available/page/9#post-7067848
Quoted from EJS:Does PBR stock these plastic score reel holders?
I'm assuming not since Marco never had them.
In need of a few of these for...well...several games actually if anyone has some used ones.
https://www.marcospecialties.com/pinball-parts/B-10808
John_I Are the score reel guides that Marcos is advertising from your Pinside ship?
https://pinside.com/pinball/market/shops/1312-space-coast-pinball/04842-gottlieb-score-reel-guide-brackets-slides
Quoted from EJS:Does PBR stock these plastic score reel holders?
I'm assuming not since Marco never had them.
In need of a few of these for...well...several games actually if anyone has some used ones.
https://www.marcospecialties.com/pinball-parts/B-10808
Ive got 6-8 of these in some surplus card cages. Could get you a bunch
Need playfield wiring harness and complete motor board for Dealer's Choice.
Hit me up!!!
Does anyone have need of a Big Daddy #287 schematic? While going through my old pinball trunk looking for something else I cam across this schematic for the 1963 game and a 1966 schematic for a William's Pitch n Bat #332. It's a shame to lose it if someone can use them.
Quoted from bluespin:John_I Are the score reel guides that Marcos is advertising from your Pinside ship?
https://pinside.com/pinball/market/shops/1312-space-coast-pinball/04842-gottlieb-score-reel-guide-brackets-slides
Those from the shop appear to be for score reels of older GTB….looks like for some wedgehead games.
Looking for a translite/backglass for "Wild Wheels"
Not sure what to do with this machine. I saved it from the dump and gave the guy $200 to hold it for me. I didn't know it was missing the backglass.
Quoted from zebpin61:Does anyone have need of a Big Daddy #287 schematic?
IPDB.org could use a good scan of Big Daddy. Maybe someone who needs a copy could scan it for them. I don't need one but I'd be willing to scan and submit it.
I’m in need of a drop target plunger for an Allied Leisure Dynomite.
Allied decided to develop their own parts instead of using common parts from the big 3.
The plunger in question is very unit with a plastic top portion that uses a tiny metal pin to area has to target.
Anyone have one of these? Please PM me.
Thanks!
314EB0FC-4146-4ACE-A2C1-2879F86D1E36 (resized).jpegPosted in the General Section by accident.....
In search for a new Bat Mechanism for a Chicago Coin Baseball Champ, or the parts if not complete. The parts on my game are worn and sloppy, wanting to replace or re-make these parts to give the bat the proper 'snap'. I would consider using a different mech from a Williams game, or another type of P&B too, as long as its all there and not broke to bits. I can post a pic of it if necessary! Thanks in advance!!
I did a service call on a Gottlieb Spirit of 76 today. Start issue came down the AX relay. Someone at some point bent the metal arm in that holds the armature ladder. After screwing with it trying to bend into the correct position, I could never get the switches to the correct travel to open and close the switches.
Gottlieb interlock relay part number C-4989, called the "AG relay housing" or I would buy any used AX or BX relay with that part.
Surrey, BC
Quoted from megoman:I’m in need of a drop target plunger for an Allied Leisure Dynomite.
Allied decided to develop their own parts instead of using common parts from the big 3.
The plunger in question is very unit with a plastic top portion that uses a tiny metal pin to area has to target.
Anyone have one of these? Please PM me.
Thanks!
[quoted image]
I don't see it in their store, but I'd suggest reaching out to John Robertson as flippers.com. He has lots of Allied parts and knowledge. If he doesn't have the part, he should probably know a workaround.
Quoted from tomdrum:I did a service call on a Gottlieb Spirit of 76 today. Start issue came down the AX relay. Someone at some point bent the metal arm in that holds the armature ladder. After screwing with it trying to bend into the correct position, I could never get the switches to the correct travel to open and close the switches.
Gottlieb interlock relay part number C-4989, called the "AG relay housing" or I would buy any used AX or BX relay with that part.
I may have one. Check back in the AM.
Quoted from megoman:I’m in need of a drop target plunger for an Allied Leisure Dynomite.
Allied decided to develop their own parts instead of using common parts from the big 3.
The plunger in question is very unit with a plastic top portion that uses a tiny metal pin to area has to target.
Anyone have one of these? Please PM me.
Thanks!
[quoted image]
Jeff Moorehead has a game for sale if you need some extra parts
Quoted from megoman:I’m in need of a drop target plunger for an Allied Leisure Dynomite.
Allied decided to develop their own parts instead of using common parts from the big 3.
The plunger in question is very unit with a plastic top portion that uses a tiny metal pin to area has to target.
Anyone have one of these? Please PM me.
Thanks!
[quoted image]
Some pinsider 3D printed the part. Look into the cocktail pinball club.
Promoted items from Pinside Marketplace and Pinside Shops!
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
