Quoted from jsf24:He is not looking for the rollovers, he's looking for the inserts "housings".
[quoted image][quoted image]
Might have to use a good machinist to fabricate the base insert housing.
Quoted from jsf24:He is not looking for the rollovers, he's looking for the inserts "housings".
[quoted image][quoted image]
Might have to use a good machinist to fabricate the base insert housing.
Quoted from pinhead52:pbr shows out of stock on the green, but white avail., why would you not order there?
I need the housing they sit do side of, it’s an insert. PBR doesn’t have them they confirmed this to me.
8C8172C1-AFAA-428F-80FF-757DB7FEF43D (resized).jpegQuoted from Jets_1479:I need the housing they sit do side of, it’s an insert. PBR doesn’t have them they confirmed this to me.
[quoted image]
Maybe someone can 3D print one. Have you checked the swinks store?
Quoted from Jets_1479:I need the housing they sit do side of, it’s an insert. PBR doesn’t have them they confirmed this to me.
[quoted image]
What game is it?
Quoted from Silverstreak02:I had the same problem. With a little work they are easy to make. Start with 2 inserts, drill, sander and some epoxy.
[quoted image][quoted image][quoted image]
Can you PM more details about your method?
Quoted from Peruman:I’m looking for at least 9 of these threaded playfield posts. These go into 6/32 t-nuts. The total length is 2”.
Both PBR and Marco are out of stock on the ones with the threaded top.
Alberto
[quoted image]
I'm sure that I have several available.
You can use some molding compound to make epoxy copies. Just need a donor to make the mold, then you could make a bunch of whatever color you like.
Like this stuff: https://www.smooth-on.com/product-line/mold-star/
Quoted from ZNET:I'm sure that I have several available.
Thanks! If the posts I ordered from Pinball Life are not correct, I will contact you.
Regards
Alberto
Anyone have or know of anyone that might have an original 1969 Sega Grand Prix machine topper marquee (example in 2nd pic)?
I would be interested in a reproduction one as well.
Just came across an awesome machine but it’s missing the topper (1st pic).
Thanks in advance!
4B303FF9-ABC9-46E7-82D3-D4E9151DA08B (resized).jpegF1768E56-75D0-4AD2-A7D3-2E927C8DE82B (resized).jpegAfter doing all the playfield and cabinet repair on my basket case Kings & Queens , I finally attacked the head. As it turns out, that stepper assembly isn’t just dirty. It’s mangled. The bottom shoulder bolt is about 1/3 of the way to having its head sheared off. After disassembling, I think I can coax it to limp along, but I’d rather just replace the whole unit, if possible.
This year will be my first pinfest, so I’m not sure how prevalent or abundant EM parts are. At minimum, I’d like to replace these shredded levers and shoulder bolts. The entire mounting assembly, with or without a replacement board, would be great, too.
If you have some frankenbits for me, I’d be grateful. [Please PM] If this is a dumb thing to be asking for 3 weeks before pinfest, I’m happy to know that, too. I’ve got so much shopping to do, I hope there’s time to play pinball!
PS- I had to hammer out the gear shaft with an old flipper shoe & post, so I included that handiwork for your amusement.
519207D8-A3E7-47D4-A91F-8767C48AE032 (resized).jpeg6497EADA-68BB-46F6-86D2-3CF58AF61DB8 (resized).jpeg7BFA8C9F-45E9-4278-A3FF-68A139473E43 (resized).jpegQuoted from LoudBeardyHatGuy:PS- I had to hammer out the gear shaft with an old flipper shoe & post
Btw…I’m thinking about making a clock out of the shoe & bracket, if I can get a replacement.
Quoted from Snowman:Looking for a 1970’s gottlieb lockbar d14008a with the two studs like this one. (not the shark fins version…).
[quoted image]
I can convert a sharkfin bar into the stud bar, let me know if you want one. $145 shipped.
This will probably be a tough one to find, but does anyone have the flipper apron for Gottlieb 1953 Grand Slam? Mine has a Williams one that must have been swapped out a long time ago.
Here is what mine looks like.
20220413_173851 (resized).jpg
But here's what it's supposed to have for the "flippers" guide.
Quoted from HydrogenHuman:This will probably be a tough one to find, but does anyone have the flipper apron for Gottlieb 1953 Grand Slam? Mine has a Williams one that must have been swapped out a long time ago.
Here is what mine looks like.
[quoted image]
But here's what it's supposed to have for the "flippers" guide.
[quoted image]
Quoted from HydrogenHuman:This will probably be a tough one to find, but does anyone have the flipper apron for Gottlieb 1953 Grand Slam? Mine has a Williams one that must have been swapped out a long time ago.
Here is what mine looks like.
[quoted image]
But here's what it's supposed to have for the "flippers" guide.
[quoted image]
Did you just buy that?
Quoted from Playdium:Did you just buy that?
Yes, he did. Was right in your backyard I believe.
Quoted from jrpinball:Yes, he did. Was right in your backyard I believe.
OK, I thought so. I saw the listing and the price was $800. More than I would have spent. I like my wedge heads more.
Quoted from Playdium:OK, I thought so. I saw the listing and the price was $800. More than I would have spent. I like my wedge heads more.
I offered $400 and was able to get it for $500. I was willing to pay that price due to it being a desirable woodie.
Need a Gottlieb rear door retainer channel, the metal U shaped piece the bottom of the metal door sits in. It for a 1967 Super Score but sure other 2 or 4 players games would work. Mine is 27.5" long, however I would cut a longer one down. Can pick up at Pinfest or pay shipping.
Quoted from tomdrum:Need a Gottlieb rear door retainer channel, the metal U shaped piece the bottom of the metal door sits in. It for a 1967 Super Score but sure other 2 or 4 players games would work. Mine is 27.5" long, however I would cut a longer one down. Can pick up at Pinfest or pay shipping.
yea you can get it at Pinfest. PBR will also sell you one
Metal Strip that the door slides in
GTB-D8563-1
*Note – This part can also be special ordered for 2 or 4 player games. Please let us know the length you need!
GTB-D8563-1CU
I need... the L bracket on bottom side Gottlieb 70's era playfields, the one with the hole that the lockdown bar handle locks into with its nub. Restoring a game that came in in pieces...
Ken
Quoted from pinhead52:I need... the L bracket on bottom side Gottlieb 70's era playfields, the one with the hole that the lockdown bar handle locks into with its nub. Restoring a game that came in in pieces...
Ken
I have 2 available.
20220417_152025 (resized).jpgQuoted from Shawn1976:Looking for an instruction card and some of the plastics for my Gottlieb Sing Along Pinball machine.
Anyone help me out with these?
[quoted image][quoted image]
Peter has the cards on his website
http://www.pinballrebel.com/pinball/cards/
You want me to print it out on some yellow stock I have?
I need the "Slug Rejector Chutes" for a 1967 Gottlieb Super Score. The parts the carry the coin from the entrance plate down to the coin door. Any from 1962-1967 should work. PM if you can help.
Someone near Manteca, CA, might want to go grab these:
https://www.facebook.com/marketplace/item/1091710394709437?ref=search&referral_code=marketplace_search&referral_story_type=post&tracking=browse_serp%3Ad048a5c4-df21-45dc-bd6a-6d3569e29a32
Looking for a single one of these yellow drop targets for a Far Out. Even if it’s just a plan yellow drop target, I can make it work.
Also looking for the right slingshot plastic for the same game.
5432C91A-52B0-493C-9D1A-194870CC9901 (resized).jpeg8F8F04C2-A30C-44F8-A634-1061D74BC471 (resized).jpegQuoted from MikeO:Need backbox for Gottlieb Abra Ca Dabra.
Mike O.
old post nevermind
Quoted from Peruman:Looking for a single one of these yellow drop targets for a Far Out. Even if it’s just a plan yellow drop target, I can make it work.
Also looking for the right slingshot plastic for the same game.
[quoted image][quoted image]
Ive got a bunch of drop targets. Might even have your plastic
Quoted from pinhead52:Ive got a bunch of drop targets. Might even have your plastic
That would be awesome!
Alberto
Quoted from Peruman:Looking for a single one of these yellow drop targets for a Far Out. Even if it’s just a plan yellow drop target, I can make it work.
Also looking for the right slingshot plastic for the same game.
[quoted image][quoted image]
I have a drop target as well
Quoted from Peruman:Looking for a single one of these yellow drop targets for a Far Out. Even if it’s just a plan yellow drop target, I can make it work.
Also looking for the right slingshot plastic for the same game.
[quoted image][quoted image]
So I guess you snagged that one in Manchester with the one wrong target, huh? Good for you!
Quoted from jrpinball:So I guess you snagged that one with the one wrong target, huh?
Yes I did, it’s a little more beat up than the photos showed but I can work with it.
Alberto
Anybody have a right side spinner for a 1976 Williams Blue Chip? I'm assuming the right is the same as the left side. Let me know, thanks.
Quoted from Peruman:Yes I did, it’s a little more beat up than the photos showed but I can work with it.
Alberto
Was it the airline pilot guy? He used to post here a long time ago, but haven't seen him in a long time.
Anyone have a Gottlieb back door for sale? Specifically it is a 70s Gottlieb EM 4-Player game, Jack in the Box. My machine did not come with one!
Quoted from KyleMikolajczyk:Anyone have a Gottlieb back door for sale? Specifically it is a 70s Gottlieb EM 4-Player game, Jack in the Box. My machine did not come with one!
Where are you located? I can't imagine shipping one. I have had them made by HVAC guys for like $15
Hey all, I'm looking for as many Gottlieb "2-Coin One Play" style relays (AS type relay) as I can find. Please let me know if you have any.
Looking for a complete plastic set for Gottlieb Grand Slam from 1953. I know there are repro ones, but I was looking to see if I could get some for a little cheaper, lol.
Quoted from radial_head:Hey all, I'm looking for as many Gottlieb "2-Coin One Play" style relays (AS type relay) as I can find. Please let me know if you have any.
I have a couple of as relays with the alternating cam you could adapt
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-em-seeking-parts-thread/page/176?hl=jethrop and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.