"300"
Gottlieb, 1975
2001
Gottlieb, 1971
8 Ball
Williams, 1966
Abra Ca Dabra
Gottlieb, 1975
Amigo
Bally, 1974
Aquarius
Gottlieb, 1970
Atlantis
Gottlieb, 1975
Bank-A-Ball
Gottlieb, 1965Quoted from smohr:Ah.. I can try that I do have some leftover white ones in my stash. I'll post the outcome. - Thanks
If you are not happy with the results PM me. I can help you out.
20220204_190216 (resized).jpg20220204_190221 (resized).jpgQuoted from smohr:1951 Williams Horse Shoes - Also looking for 3 good used or new 4 hole "RED" dead pop bumper skirts. PBR and Marco are out of stock.
I know the pic is yellow but I need red.
Thanks
Steve
[quoted image]
I probably have some good red ones available. Please PM me.
Quoted from smohr:Found some locally Thank you jsf24 - Thank you to those who responded….
1951 Williams Horse Shoes - Also looking for 3 good used or new 4 hole "RED" dead pop bumper skirts. PBR and Marco are out of stock.
I know the pic is yellow but I need red.
Thanks
Steve
[quoted image]
I have 1 new red skirt available, if your local purchase falls through or if other sources have insufficient quantity.
20220205_145951 (resized).jpgQuoted from FlipperFix:Looking for some Genco coils.
J-121
J-221
Any and all help appreciated. Pictures for reference.
[quoted image][quoted image]
Did you try Steve Young's Pinball Resource?
Quoted from vec-tor:Did you try Steve Young's Pinball Resource?
What about flippers.com?
Looking for 4 of these switch covers for a couple games I’m restoring. Jimmy at PBR confirmed they don’t have these.
Looking for old originals if anyone has some?
Part 3B-7233 Williams Credit Switch Cover
I know someone is making new ones for $25 a piece but come on…
Quoted from vec-tor:Did you try Steve Young's Pinball Resource?
I always try Steve first, he was a no go.
Quoted from bluespin:What about flippers.com?
Can't really find anything on their website, I'll try to contact them.
Quoted from smersh:Hello. I'm looking for Big Hit by Gottlieb 1977 replay card and the other card is for the runs scored replay.
Have you tried https://www.pinballrebel.com/pinball/cards/?
I'm trying to find a motor and cams for 1952 Williams Twenty Grand. Motor part # 5300 or replacement 6702 (45V). The cam is #4263
According to Steve Young of PBR, this same setup is found on most Williams games 1949-1953. It is mounted to the underside of the playfield.
See pictures
Please help.
twenty grand - wms - 1952 - score motor (resized).jpgtwenty grand - wms - 1952 - score cam 2 (resized).pngtwenty grand - wms - 1952 - score cam 1 (resized).pngQuoted from pinhead52:Anybody have a spare set of LARGE early 60's GTB endcaps? Need to get a pair replated....
[quoted image]
I have several. Pm me I’ll be back at home in a week. I’ll send you 3 pair send me back one pair replated.
Quoted from John_in_NC:I have several. Pm me I’ll be back at home in a week. I’ll send you 3 pair send me back one pair replated.
deal
Quoted from dsirussell:I'm trying to find a motor and cams for 1952 Williams Twenty Grand. Motor part # 5300 or replacement 6702 (45V). The cam is #4263
According to Steve Young of PBR, this same setup is found on most Williams games 1949-1953. It is mounted to the underside of the playfield.
See pictures
Please help.
[quoted image][quoted image][quoted image]
If you can’t find the cams one option could be finding a local shop with a CNC laser cutter and see if they could help. They would likely need a STL, STEP or DFX file for the part dimensions.
Quoted from kingpinman:Anyone have a space odyssey or space mission complete knocker assembly and chime unit parts. They want to sell.
Thank you
[quoted image]
The knocker assembly is common to all classic Williams games, outside of the coil value.
Firepower, etc... I think up too 1984?
Quoted from pinhead52:Anybody have a spare set of LARGE early 60's GTB endcaps? Need to get a pair replated....
[quoted image]
Ken I have these two from a slick chick.
38E57C46-AB52-45EC-B660-BBFADEAFB6BE (resized).jpegQuoted from kingpinman:Anyone have a space odyssey or space mission complete knocker assembly and chime unit parts. They want to sell.
Thank you
[quoted image]
Why not just fix what you have. PBR sells a rebuild kit and coils if you need them. You can make the missing bar with bar stock from Home Depot. This is mine from my Space Mission. It looked like yours when I started. PBR also sells the complete knocker assembly.
B75583E4-989A-4832-A268-C76BD84F41D4 (resized).jpegDCB4A993-774B-4F8A-A31F-7E59B7865AC6 (resized).jpeg
Quoted from Judoratt:Ken I have these two from a slick chick. [quoted image]
thats the smaller stuff. I was looking for the BIG ones. John_in_NC has got 5 steps coming to me... If anybody needs a refresh let me know, will get these rechromed
Quoted from LongJohns:Hello,
I am looking for the following for a Gottlieb Dodge City:
1) apron screws, slotted head approx 1 5/8" long
Bolt depot has everything you’ll ever need. Zinc plated should work but they come in other options and diameters as well.
https://www.boltdepot.com/Wood_screws_Slotted_round_head_Zinc_plated_steel_8.aspx
Quoted from smersh:No not yet but I'm going to look now. Thx
Just wanted to give a shout out to MarkG and another on here for hooking me up with cards for Big hit. Excellent
Quoted from Murphdom:Bolt depot has everything you’ll ever need. Zinc plated should work but they come in other options and diameters as well.
https://www.boltdepot.com/Wood_screws_Slotted_round_head_Zinc_plated_steel_8.aspx
apron really needs 1 5/8s I have both the screws and the posts but I hate int. shipping...
Anyone know if these tiny nylon washers for spinners can be bought? I’d like to have about a dozen or so on hand. I’m sure they’re on Amazon or can be found in a mom and pop hardware store. I just don’t know what to call them except “tiny nylon washers”
DA0B9BC5-5910-4846-B7E4-8D0C40BAF6EF (resized).jpeghttp://www.pbresource.com/spinner.html
scroll down just a bit. I think I've gotten them from Marco or pinballlife before as well.
Quoted from mrm_4:Anyone know if these tiny nylon washers for spinners can be bought? I’d like to have about a dozen or so on hand. I’m sure they’re on Amazon or can be found in a mom and pop hardware store. I just don’t know what to call them except “tiny nylon washers”
[quoted image]
The Pinball Resource sells them.
Quoted from BorgDog:http://www.pbresource.com/spinner.html
scroll down just a bit. I think I've gotten them from Marco or pinballlife before as well.
Quoted from JethroP:The Pinball Resource sells them.
Thanks guys!
Quoted from pinhead52:apron really needs 1 5/8s I have both the screws and the posts but I hate int. shipping...
Well, I will be in Florida on March 5 for 10 days. 
Quoted from LongJohns:Well, I will be in Florida on March 5 for 10 days.
give me an address or hit me up when you are there
I need pieces from a 70's Bally door or the whole door if necessary. I need the eject plate, arm and pivot point pieces. On the door i have these are missing and without them the eject rod/button flops around/not in its normally erect/protruding position. I have a new skin from Marco but just need the pieces circled.
(Anybody need a slightly used bally door skin, selling cheap?)
Quoted from pinhead52:I need pieces from a 70's Bally door or the whole door if necessary. I need the eject plate, arm and pivot point pieces. On the door i have these are missing and without them the eject rod/button flops around/not in its normally erect/protruding position. I have a new skin from Marco but just need the pieces circled.
(Anybody need a slightly used bally door skin, selling cheap?)
thx
ken
[quoted image]
Message Pinside user Tomdrum. He rebuilds Bally doors and may have the parts you need.
Working on a Williams jumpin' jack early mid sixties. I'm looking for a complete score reel assem (metal wheel) a ball count stepper assem and a ball shooter assem (rod,housing etc) Thanks
Quoted from Skidave:Message Pinside user Tomdrum. He rebuilds Bally doors and may have the parts you need.
He had the parts I needed, thanks much!
Quoted from Skidave:Looking for a 1 & 1/8 inch rail for a Bally. Please see pic below. Marco's has 1" and 1 & 1/4" but not the 1 & 1/8.
Consider buying stainless rod on ebay for a few dollars and bending your own. Easy to do with a pair of pliers.
Quoted from JethroP:Consider buying stainless rod on ebay for a few dollars and bending your own. Easy to do with a pair of pliers.
Marco's has a small jig and rod. I will go that route if necessary. Was hoping someone has one in a parts bin.
Quoted from jdjdt1:Looking for the rubber grommets used on relay banks as well as score motor brackets on Chicago Coin EMs. Tried both PBR and Marco with no luck. Any suggestions would be great.
Do you have pix? Ref. game?
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-em-seeking-parts-thread/page/173?hl=skidave and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Whitehall, PA
Edmonton, AB