"300"
Gottlieb, 1975
2001
Gottlieb, 1971
8 Ball
Williams, 1966
Abra Ca Dabra
Gottlieb, 1975
Amigo
Bally, 1974
Aquarius
Gottlieb, 1970
Atlantis
Gottlieb, 1975
Bank-A-Ball
Gottlieb, 1965Quoted from DropTarget:I can't seem to find it, but someone posted a 3D print file for those a while back.
Dang, that is something that I could definitely model and 3D print. Part number is C-9994. I don't see it on thingiverse. If I had a game with one in it, I would make an stl file for it. Oddly my current lineup of Gottlieb EMs doesn't include a game with that part... I would recommend printing in PETG for heat resistance, or use LEDs or both.
Quoted from SpyroFTW:But is yours nicer?
I have 2 Gottlieb lockdown bars available. One is extremely nice. The other is less nice.
The nice one is on top in the 2 photos. No dents, no chips on that one.
PM me, if interested. Donation to Pinside if sale occurs.
20220125_231111 (resized).jpg20220125_231134 (resized).jpgQuoted from ZNET:I have 2 Gottlieb lockdown bars available. One is extremely nice. The other is less nice.
The nice one is on top in the 2 photos. No dents, no chips on that one.
PM me, if interested. Donation to Pinside if sale occurs.
[quoted image][quoted image]
Yea if you are on a budget crunch Ive got a dented up fin bar I'd let go for $35 shipped
Quoted from dpk27:Yes that is it.
Send me a PM if you want to get it.
Quoted from dpk27:I am looking for the plastic divider that fits under the apron and over the ball count lamps for a Gottlieb King of Diamonds.
PBR sells those.
Quoted from Garrett:Looking for a head box back door for a 1976 Williams Aztec. Thanks!!
I’ve got one if you’re interested but it could be costly to ship. Go to a local sheet metal fabricator and get some estimates.
Flippers.com has you covered:
https://flippers.com/catalog_oc/pinball-game-parts-c-5/williams-c-5_36/spring-p-4815.html
Tell John that Mark says Hi.
Quoted from MarkG:Flippers.com has you covered:
https://flippers.com/catalog_oc/pinball-game-parts-c-5/williams-c-5_36/spring-p-4815.html
Tell John that Mark says Hi.
I may have gotten the last spring from John... (certainly ask him)
I do have a complete Williams stepper with spring available, no longer needed for another project. I'd sell for $50 shipped.
Ken
Quoted from AlexF:I need the beachball plastic for Pleasure Isle. I realize this is probably a long shot.[quoted image]
Hi Alex—I have an extra original from Big Top if you’re still looking.
Quoted from SilverLiningMan:Hi Alex—I have an extra original from Big Top if you’re still looking.
You do? Very cool. I'm interested.
Quoted from AlexF:You do? Very cool. I'm interested.
You bet. Happy to help. Just happen to have this bit of Unobtanium and it’s nice to be able to find a good home for it.
Quoted from SilverLiningMan:You bet. Happy to help. Just happen to have this bit of Unobtanium and it’s nice to be able to find a good home for it.
Oh man, I'm so excited to get this. Thank you!
Quoted from pinhead52:I may have gotten the last spring from John... (certainly ask him)
I do have a complete Williams stepper with spring available, no longer needed for another project. I'd sell for $50 shipped.
Ken
Thank you both! I will just order the spring. I really just want it functioning it will not do anything meaningful since I play for free anyway. I just want to get it to closer to 100%.
Quoted from pinhead52:I may have gotten the last spring from John... (certainly ask him)
I do have a complete Williams stepper with spring available, no longer needed for another project. I'd sell for $50 shipped.
Ken
You know what let's do that. For the price of the spring why not.
Quoted from RetroDad65:You know what let's do that. For the price of the spring why not.
Right!
Quoted from undrdog:These metal covers are from a 1957 Wms machine. I’m looking for more , in different lengths.
I could look around for them if I knew what they are called . Anyone know?[quoted image]
There is a Gary Baker that makes all sorts of ball guides etc out of stainless, will forward his email to anybody that needs it.
Quoted from undrdog:These metal covers are from a 1957 Wms machine. I’m looking for more , in different lengths.
I could look around for them if I knew what they are called . Anyone know?[quoted image]
Coincidentally, I posted a large variety of EM playfield metal on the Woodrail Facebook page last weekend. Most of it is spoken for.
However, below are photos of the remaining items. PM me with any interest. Pinside donation will accompany a purchase.
20220127_195804 (resized).jpg20220127_195829 (resized).jpgQuoted from ZNET:Coincidentally, I posted a large variety of EM playfield metal on the Woodrail Facebook page last weekend.
Thanks. I’ll measure and PM.
Looking for one of this style tray assemblies. I don’t need the coil. It’s off a 1951 Williams Hayburners. I need one that has the double slot switch actuator. Picture shows a single slot actuator.
Thanks
0098CAD7-C8E7-4157-846C-F52B63C2CB26 (resized).jpeg30493CD4-3759-488F-800C-CA13639C5CBB (resized).jpeg7E873899-43AD-454D-9348-5EE83D05DC9A (resized).jpegQuoted from undrdog:Thanks. I’ll measure and PM.
Unfortunately, not the sizes I need. Thank you very much for posting.
Quoted from ZNET:However, below are photos of the remaining items. PM me with any interest
How much for the 2nd tape measure?
Quoted from pinhead52:I may have gotten the last spring from John... (certainly ask him)
I do have a complete Williams stepper with spring available, no longer needed for another project. I'd sell for $50 shipped.
Ken
Pinhead - Just checking I sent you a PM to figure out how to get it.
Quoted from DropTarget:How much for the 2nd tape measure?
I'm donating it to the Smithsonian. It's a prototapetype.
Quoted from illawarra92:looking for a gottlieb sea belles 1956 playfield
I've salvaged worse than that. Too bad you are where you are and I am where I am.
Looking for a Bally ball gate with wire if possible that measure right at 3 1/4” from end to end and 3” screw hole to screw hole.
They are on 3 of my games, Wizard!, Aladdin’s Castle and Nitro Ground Shaker but the Wizard didn’t come with one and I never see the right one on eBay. Thanks.
E774AB79-0D55-411B-8DE0-F3669640D0C6 (resized).jpegQuoted from Sea_Wolf:Looking for a Bally ball gate with wire if possible that measure right at 3 1/4” from end to end and 3” screw hole to screw hole.
They are on 3 of my games, Wizard!, Aladdin’s Castle and Nitro Ground Shaker but the Wizard didn’t come with one and I never see the right one on eBay. Thanks.[quoted image]
Part No. AS-2250-24
Gate used on many Bally games.
Fireball, Monte Carlo, Odds & Evens, Nip-It, Amigo, etc.
I'm looking for parts for a 76 Gottlieb Volley. Looking for a nice playfield, backglass, right sling plastic and the center plastic mounted behind the yellow drop targets. Plastic set is available new and I might go that route, any help would be greatly appreciated.
Quoted from Jets_1479:Hello looking for an armature assembly from a 1951 Williams Hayburners credit stepper. I need all 3 pieces. The post (screw style with bolt on back side) the armature on the bottom that links into the plunger, and the smaller armature on the top. My smaller armature has a stud post for the spring, but the versions with the hook will work as well.
In case you’re wondering it cleaned up really well. New springs on the way.
[quoted image][quoted image][quoted image][quoted image]
This is what I have
Quoted from Pinbub:Plastic set is available new
Where? Did the Aussies sell their artwork?
Quoted from boilerman:i need a large door gottlieb EM base cabinet. just needs to be solid.
Hey hey!
Quoted from jrpinball:Hey hey!
ho ho
Quoted from mrm_4:Is there a source for Williams coin door skins? I’m finding every other company but Williams
here or ebay, nobody to my knowledge has reproduced them
1951 Williams Horse Shoes - Im looking for some latch relay armatures. I just had one that all the tabs broke. The pic below is what I am looking for. The red arrows point to the tabs (green) that are missing.
Thanks
Steve
latch_aramture_2 (resized).jpg
Added over 2 years ago: Found some thanks
Found some locally Thank you jsf24 - Thank you to those who responded….
1951 Williams Horse Shoes - Also looking for 3 good used or new 4 hole "RED" dead pop bumper skirts. PBR and Marco are out of stock.
I know the pic is yellow but I need red.
Thanks
Steve
Quoted from smohr:1951 Williams Horse Shoes - Also looking for 3 good used or new 4 hole "RED" dead pop bumper skirts. PBR and Marco are out of stock.
I know the pic is yellow but I need red.
Thanks
Steve
[quoted image]
Dye some white ones red with Rit dye. You might have to take the sheen off them first with fine steel wool. They’ll dye better
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-em-seeking-parts-thread/page/172 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Colleyville, TX
Bulli
Reykjavik
