The last piece I’m missing for my 1954 Williams Daffy Derby is not available at the usual suppliers.
Anyone have a plunger and screw for the relay bank reset? Part numbers 10-2701 and 2358 in the parts diagram.
0DBB8251-E7D8-43D4-BE3E-12A740527DFB (resized).jpeg
Hello, looking for one screw/bolt combo to the lock down bar on a gottlieb. This is the type with two small roughly half inch screws that the lock bar grabs onto.
Yes I am aware PBR has them, so let’s get past that. I literally have a large order arriving Monday, just realized I needed this tonight. Hoping someone has one they are willing to drop in an envelope taped inside and pass along. Otherwise it’ll be a while till I have enough items ready to order again at PBR to make the shipping worth it.
Thanks!
I've ordered small parts from PBR and asked them just to put in an envolope. They sent it USPS regular mail. Might want to try that.
Gottlieb Paradise, Looking for the Red Letter B playfield insert, just need one. Can anyone Help? thanks
Happened to see this Gottlieb “Play Again” replay reel on eBay. Never seen one before! Any idea what it was used on?
Quoted from Gotemwill:Happened to see this Gottlieb “Play Again” replay reel on eBay. Never seen one before! Any idea what it was used on?
ebay.com link: Gottlieb Pinball Play Again Credit Reel
Crazy. I've never seen anything like it, nor heard of it before. I have to bounce it off Mr. Young.
Looking for a few Plastics for a 1977 Williams "Big Deal". Need the plastic behind the drop targets on the word "Big", the plastic that is in upper left near "Advance Bonus" and the plastic in lower left with the woman on it. This machine has sentimental value to me and I'm trying to restore it. Thank you
20220105_132622 (resized).jpg20220105_132627 (resized).jpg20220105_132634 (resized).jpgLooking for the latch mechanism for the lockdown bar for an early to mid 60's Williams game. I only need the lower portion which has the latch arm you use to lock and unlock the lockbar. I have the part that the playfield rests on.
This was the first latch mechanism Williams used on pinballs.
Looking for Bally Knockout head parts/score reels
pasted_image (resized).png Added over 2 years ago:UPDATE: Thanks to pinhead52 and Jets_1479 I have everything I need to do surgery on Knock Out
Quoted from slghokie:Looking for Bally Knockout head parts/score reels
[quoted image]
OUCH!
Quoted from slghokie:Looking for Bally Knockout head parts/score reels
[quoted image]
Ive got reel assembles from an Aladins castle, pm me and I'll fix you up
Quoted from Mastkey:Looking for an old style relay for a Williams 1962 vintage game. Need 4 normally open switches. See pic.
[quoted image]
Why, oh why, oh why don't people ever want to name the game they need the part for! That way, "hey I have a junker.... that I can get the part from". It's not like you'd be inclined to look through all of your older Williams parts games hoping to find that particular relay, but if you know what game it's for, you would know for sure whether you have it or not.
Quoted from jrpinball:Why, oh why, oh why don't people ever want to name the game they need the part for! That way, "hey I have a junker.... that I can get the part from". It's not like you'd be inclined to look through all of your older Williams parts games hoping to find that particular relay, but if you know what game it's for, you would know for sure whether you have it or not.
It’s a Williams 3 Coins. I sent him
Pictures of my 3 Coins 1 point relay to see if it was wired correctly, so I’m assuming it was.
Yes, it is a Williams "3 Coins" and I didn't mention the specific game as it could limit the options available since it was used in other games of that era.
Quoted from Mastkey:Yes, it is a Williams "3 Coins" and I didn't mention the specific game as it could limit the options available since it was used in other games of that era.
I have the same relays in my 1960 Williams Serenade.
Quoted from Mastkey:Yes, it is a Williams "3 Coins" and I didn't mention the specific game as it could limit the options available since it was used in other games of that era.
Yes, but it surely would be helpful because if someone has a junker "3 Coins" they would know for sure that it has the relay you're looking for. You could also mention that it's likely used in other models as well, and we pinheads would know which games are similar enough to "3 Coins".
Quoted from AlexF:I need the beachball plastic for Pleasure Isle. I realize this is probably a long shot.[quoted image]
I found an entire head for one, so anything is possible.
Doesn't "Big Top" have the same disc in it?
Quoted from jrpinball:I found an entire head for one, so anything is possible.
Doesn't "Big Top" have the same disc in it?
Does it? I didn't know that? I have redrawn the art in Illustrator, so I could make one but would much prefer an original if possible.
Quoted from AlexF:Does it? I didn't know that? I have redrawn the art in Illustrator, so I could make one but would much prefer an original if possible.
Big Top has the same exact plastic only difference is the background on big tops is purple
Anyone know of the name or a source for the chains used in 1951 Williams Hayburners? Also used in the jalopy version. The chains drive the race cars/horses on the animated backglass track.
typing in chains on Google and man there is some wide variations in results. Just checking here if anyone can help narrow it down for me.
Quoted from Jets_1479:Anyone know of the name or a source for the chains used in 1951 Williams Hayburners?
Ladder chain. Used in player pianos and other devices that turn sprockets.
Quoted from Bowlerguy:Does anyone know what this goes to? Only markings say Dayton. There is not stampings on the motor. These are NOS. Thankyou
[quoted image][quoted image][quoted image][quoted image]
I dig Pinball, Cheeze-its, Coffee, Dorritos, and Bowling. Sounds like a good man.
Quoted from iamdrunker:I dig Pinball, Cheeze-its, Coffee, Dorritos, and Bowling. Sounds like a good man.
I spoke too soon. The Dorritos are on a pizza box. You are the Man.
Quoted from MarkG:Ladder chain. Used in player pianos and other devices that turn sprockets.
Many thanks!
Regarding the rings, after reading about the way it is attached to ring, mine are most likely riveted but the ring is the same as what you pictured.
Quoted from Mastkey:Regarding the rings, after reading about the way it is attached to ring, mine are most likely riveted but the ring is the same as what you pictured.
PM sent
I am looking for a few longshots, a lockdown bar, backglass and backbox door for a Gottlieb Jungle Queen. I can always make or have a door made, but if one was available, I would prefer it. Let me know if anyone has a spare lockdown bar.
Thanks
Jason
Quoted from phlamingo:Hi everyone! I am looking for a green diamond bumper cover for a 1948 United Star Dust. Photo is of the upper-left one, I'm missing the lower-left. I'd even be happy with one of any color. [quoted image]
DANG! That is old school... I miss the classic designs.
Quoted from SpyroFTW:I am looking for a few longshots, a lockdown bar, backglass and backbox door for a Gottlieb Jungle Queen. I can always make or have a door made, but if one was available, I would prefer it. Let me know if anyone has a spare lockdown bar.
Thanks
Jason
On the lockdown bar, fin style? Ive got 1 or 2 extra there.
Quoted from pinhead52:On the lockdown bar, fin style? Ive got 1 or 2 extra there.
Its got 2 fins.
Quoted from phlamingo:Hi everyone! I am looking for a green diamond bumper cover for a 1948 United Star Dust. Photo is of the upper-left one, I'm missing the lower-left. I'd even be happy with one of any color. [quoted image]
These are probably worth more than gold. Super hard to find. Good luck in your search. If I come across any I will post here.
Quoted from SpyroFTW:Its got 2 fins.
Here's one on ebay. I have one as well but ebay is cheaper
Quoted from pinhead52:Here's one on ebay. I have one as well but ebay is cheaper
ebay.com link: itm
But is yours nicer?
Hello looking for an armature assembly from a 1951 Williams Hayburners credit stepper. I need all 3 pieces. The post (screw style with bolt on back side) the armature on the bottom that links into the plunger, and the smaller armature on the top. My smaller armature has a stud post for the spring, but the versions with the hook will work as well.
In case you’re wondering it cleaned up really well. New springs on the way.
I am looking for the plastic divider that fits under the apron and over the ball count lamps for a Gottlieb King of Diamonds.
Quoted from dpk27:I am looking for the plastic divider that fits under the apron and over the ball count lamps for a Gottlieb King of Diamonds.
This?
65D0ADDC-77CF-4A5F-AB3D-0F1D4241010B (resized).jpegQuoted from dpk27:am looking for the plastic divider that fits under the apron and over the ball count lamps for a Gottlieb King of Diamonds.
I can't seem to find it, but someone posted a 3D print file for those a while back.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-em-seeking-parts-thread/page/171?hl=carlo45 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.