Quoted from mrm_4:Looking for a S-27 500 relay coil off a Williams if anyone has any spares
[quoted image]
And you dont like Steve at PBR?
pasted_image (resized).pngQuoted from pinhead52:And you dont like Steve at PBR?[quoted image]
Why would you say that? I love Steve. I just didn’t think to look for a new one…
Just wondering if someone had an extra original
And you don’t like seeing people help each other?
Quoted from mrm_4:Why would you say that? I love Steve. I just didn’t think to look for a new one…
Just wondering if someone had an extra original
And you don’t like seeing people help each other?
for parts readily available I will go the usual places. For stuff I cant find then I come here. Generally I see/view Im imposing on people to go scavenge thru their parts bin
Quoted from pinhead52:for parts readily available I will go the usual places. For stuff I cant find then I come here. Generally I see/view Im imposing on people to go scavenge thru their parts bin
I don’t know where this is coming from man, I’ve bought parts from you before. If you want to view me as a scavenger then that’s fine. I’d still rather throw money your way for some coil that you’ll never use and make connections with people on this site before I put an order together with the parts sites.
Quoted from mrm_4:I don’t know where this is coming from man,
Whoa. All I saw was questions asked and answered. Nothing personal. Can we leave it at that?
Quoted from mrm_4:If you want to view me as a scavenger then that’s fine.
Well, then there's many scavengers here, but like many, I see it as one
Collector asking a Fellow Collector for a little hand..
I still have many machines to go through, but if I have multiples, you can
have one. I take it it's for a pin (24/25V coil), right? lmk, and I'll take a look..
btw: When possible, I also try building it up to 100 bucks before putting in an order..
Quoted from DropTarget:Anyone with a spare 1/2 moon coin chute?
TIA
Those are hard to find. There are a couple on EBay right now for $90 each.
Alberto
Quoted from mrm_4:Looking for a S-27 500 relay coil off a Williams if anyone has any spares
[quoted image]
I have a crap load of them, pm me your address.
Bob/Drain1, in Vermont
Just to add to the coil "coil needed search", I have drawers full of used/obscure/old coils that I will likely never need and do not want to die with.
These are often free......NOT for your back stock but needed to get a game up and running please. Many old and unmarked, happy to search by dimensions and ohms. Tons of other parts too...use this great thread and ask. Someday I might need something.
Bob/Drain1 in Vermont
Quoted from Drain1:I have a crap load of them, pm me your address.
Bob/Drain1, in Vermont
PM Sent thank you sir!
Looking for a gottlieb screw off a stepper. The screw is threadless for the first 11 millimeters and total of 18 millimeters in length. Just need one.
841B5AB3-0C9A-41B1-9A1E-62C5E5D57E91 (resized).jpegB8442798-04CD-49AC-A5E2-7F18BABBFC61 (resized).jpegBF007063-5B35-4FF0-A612-44039041615E (resized).jpegE5A14E44-DC26-4977-9252-1DFDFE624DA1 (resized).jpegQuoted from MarkG:Everyone who works on Gottlieb EMs needs one sooner or later:
http://pbresource.com/news/gtb-a1058.jpg
Yup, may as well order a couple of them. No matter how careful I try to be, I still manage to break one here and there.
Quoted from MarkG:Everyone who works on Gottlieb EMs needs one sooner or later:
http://pbresource.com/news/gtb-a1058.jpg
lol perfect thank you!
I’m pretty sure there are two sizes - if you’re making an order, might as well order a couple of both sizes.
If you work on these things long enough, you will need them.
Quoted from vec-tor:Williams
Rollover Button Assemblies
pg.43 1977-1978 parts manual
A-7385 or A-7903
Button head 3A-7263 specify color.
Thanks for the help. Got some replacement buttons to use - no white ones in stock but not a show stopper.
Question: How do I take off the washer/lock - whatever it is called and put it on the new plastic button or order new ones? If so, where do I order them from?
Thanks!
First image with broken button and washer/weight still on the plastic piece.
Second image with new button that works - but sometimes ball rolls over and it doesn't quite connect. Did the washer provide extra weight to keep it centered and from coming off I am thinking?
Quoted from pinball2020:Question: How do I take off the washer/lock - whatever it is called and put it on the new plastic button or order new ones? If so, where do I order them from?
I carefully work the press lock washer off the old piece with a small needle nose pliers.
If you are not saving the plastic stem, then you can carefully cut the plastic.
I have 2 Gottlieb EM lockbars with shark fins (1x widebody 1x standard) in very nice condition for sale if somebody needs one.
Looking for a ball count unit for a mid 70’s Gottlieb wedgehead. Let me know if you can help! Thank you!
Shay has none listed on his website, but if anyone needs a Gottlieb "Flipper Pool" backglass, PBR has one Shay repro for sale.
Looking for part or whole of a late 1960s Williams 10-Step Unit (for a 10,000/last reel so does not need the third switch in the stack).
Specifically, looking for the printed circuit board and wiper contact ring, if you don't have the whole assembly. Looks like these are not repro'd by anyone?
Thanks!
pasted_image (resized).pngQuoted from westofrome:Looking for part or whole of a late 1960s Williams 10-Step Unit (for a 10,000/last reel so does not need the third switch in the stack).
Specifically, looking for the printed circuit board and wiper contact ring, if you don't have the whole assembly. Looks like these are not repro'd by anyone?
Thanks!
[quoted image]
Any idea if parts from a mid-seventies match unit will work? I have parts for that.
Hi all,
Can any one spare 3 spoon leaf switch blades? PBR sells the entire pop bumper switch stack, but I just need the spoon blades, and prefer to keep my machines as original as possible.
Thanks,
Happy New Year all.
Quoted from DropTarget:Hi all,
Can any one spare 3 spoon leaf switch blades? PBR sells the entire pop bumper switch stack, but I just need the spoon blades, and prefer to keep my machines as original as possible.
Thanks,
Happy New Year all.
What game manufacture?
Quoted from DropTarget:I guess that might help. Gottlieb KoD.
So basically you need a:
----- Gottlieb ------
B-8546 Bumper Switch Blade with Point.
or
A-16637 Bumper Switch Blade with Point.
Quoted from DropTarget:I guess that might help. Gottlieb KoD.
Quoted from vec-tor:So basically you need a:
----- Gottlieb ------
B-8546 Bumper Switch Blade with Point.
or
A-16637 Bumper Switch Blade with Point.
Fun fact: Gottlieb part numbers are basically sequential. A part number like 16xxx was probably first used in the mid 1970s so it's unlikely to have been used on King of Diamonds.
Quoted from vec-tor:So basically you need a:
----- Gottlieb ------
B-8546 Bumper Switch Blade with Point.
or
A-16637 Bumper Switch Blade with Point.
Yes, but someone came through, so no longer needed. Thank you.
And I believe it was originally an A-8546. Some vendors have them listed as either A-8546 or B- 8546
Quoted from DropTarget:Some vendors have them listed as either A-8546 or B- 8546
The parts book as it listed as both numbers... it depends on the pg. you are on.
I’m looking for a coin box for a williams Grand Prix if anyone out there might have one, thanks all!
Quoted from PachoHerrera:I’m looking for a coin box for a williams Grand Prix if anyone out there might have one, thanks all!
I’ve got you covered. PM me.
Quoted from tfduda:I posted this a while ago but am still looking for the cap and so am trying my luck again:
I need a used “100,000 WHEN LIT” blue (marbled) daisy pop bumper cap like the broken one shown in photo below for a Gottlieb Harbor Lites (photo is from pinside, my machine is missing the cap). Steve has repros of these listed on his site, but I am hoping to get one that is marbled to match the other caps on the machine. Thanks!
[quoted image]
I have a 10 point marbled blue cap if you're good with a Dremel. If so, you can cut out both centers and put yours in the unbroken cap. I know it's a PITA to do, I've had to do it, but if you want it, LMK
Quoted from waltrr:I have a 10 point marbled blue cap if you're good with a Dremel. If so, you can cut out both centers and put yours in the unbroken cap. I know it's a PITA to do, I've had to do it, but if you want it, LMK
That sounds like a good idea. Thanks! Will send a message shortly.
I have tried buying Leds for my Centigrade 37 2 times now & both times they have come from Mar** broken i need 8 white 4 red & 2 blue. Does anyone have any of these that they could sell me or to spare. Im guessing it is the packaging or maybe just bad luck but just trying to get better light on my games playfield (very poor light in area game is able to be in) & then with red cover up missing paint area on backglass a little if anyone can help me or has extra of any of those to sell or throw my way id appreciate it. Happy new year.
Wasn’t sure where to post this so I figured this thread made some kind of sense.
As part of cleaning up a friends Bow and Arrow I made him new spinner decals.
I think they turned out great. I made an extra set just in case I messed up trimming them.
If anyone wants this set for a Bally spinner PM me I’ll drop them in the mail for you.
AEACB50E-82CD-4236-A572-3CF7F5A07D7E (resized).jpegC45933AE-9C10-45A0-A282-304DA34C6F36 (resized).jpegQuoted from mrm_4:Wasn’t sure where to post this so I figured this thread made some kind of sense.
As part of cleaning up a friends Bow and Arrow I made him new spinner decals.
I think they turned out great. I made an extra set just in case I messed up trimming them.
If anyone wants this set for a Bally spinner PM me I’ll drop them in the mail for you.
[quoted image][quoted image]
PM Sent! thanks
Quoted from mrm_4:Wasn’t sure where to post this so I figured this thread made some kind of sense.
As part of cleaning up a friends Bow and Arrow I made him new spinner decals.I think they turned out great. I made an extra set just in case I messed up trimming them.
Those look fantastic!
Quoted from mrm_4:Wasn’t sure where to post this so I figured this thread made some kind of sense.
As part of cleaning up a friends Bow and Arrow I made him new spinner decals.
I think they turned out great. I made an extra set just in case I messed up trimming them.
If anyone wants this set for a Bally spinner PM me I’ll drop them in the mail for you.
[quoted image][quoted image]
Decals are on the way to GraniteStatePin
Anyone have a Gottlieb front leg bolt hole cover (the thin aluminum anti cheat plate stapled in) I restored a cabinet that was missing them.
Thanks
I just listed a GTB Surf Champ/Surfer playfield in the Playfields topic in case people are looking.
Thank you.
Quoted from Murphdom:Does anyone have one of these style relays laying around that they would be willing to sell?
You check PBR?
Seeking a back door for the head of a Bally On Beam - happy to pay for shipping. Please let me know if anyone has a line on repros or has a spare.
Quoted from MalikyeMoon:Seeking a back door for the head of a Bally On Beam - happy to pay for shipping. Please let me know if anyone has a line on repros or has a spare.
size?
Quoted from MalikyeMoon:1969 Bally single player.
23" W x 25 3/8"? H
Rectangle (no wedgehead tapering)
I have an extra bally multiplayer door
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-em-seeking-parts-thread/page/170?hl=murphdom and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.