(Topic ID: 93586)

The EM seeking parts thread.

By Shapeshifter

9 years ago


Topic Heartbeat

Topic Stats

  • 10,305 posts
  • 865 Pinsiders participating
  • Latest reply 3 days ago by pinhead52
  • Topic is favorited by 239 Pinsiders

You

Linked Games

Topic Gallery

View topic image gallery

20240325_122857.jpg
20240325_105918 (resized).jpg
IMG_0448 (resized).jpeg
image (resized).jpg
image (resized).jpg
20240312_160646 (resized).jpg
IMG_2264 (resized).jpeg
Screenshot_20240309-185731~2 (resized).png
e5efab146512a32505bbf17802054f9e30ddaf86 (resized).jpg
pinside.3a7b2d029b01770456deb933b846a03cb0362a2c (resized).jpg
IMG_2808 (resized).jpeg
Gottlieb Coin Door 2-23-24 (resized).jpg
Gottlieb Coin Doors (resized).jpg
pasted_image (resized).png
PXL_20240220_032931688.MP (resized).jpg
PXL_20240220_032947351 (resized).jpg

There are 10,305 posts in this topic. You are on page 165 of 207.
#8201 2 years ago

OUCH!

#8202 2 years ago

Hey guys -
Looking for a WMS '75 Credit Wheel. I have one, but the mount is off by 90-degrees. (At 0 credits on the mech, the wheel will read 14.)

Willing to trade mine (which is in really good condition) for one that works!

#8203 2 years ago

Pinball Resource used to have them. If not I can check to see if I have one.

#8204 2 years ago
Quoted from Pin-Pilot:

Looking for part #A-7563-1 (could also be #A-7563)

Flippers.com Johns jukes sells that assembly for $34
I have purchased it for SM and it works great.

#8205 2 years ago
Quoted from izzy:

Pinball Resource used to have them. If not I can check to see if I have one.

I'll call them tomorrow; not sure how I specify the orientation of the mounting washer though. I'm almost half-tempted to drill out the rivets and just move them myself.

#8206 2 years ago
Quoted from PinballAir:

Flippers.com Johns jukes sells that assembly for $34
I have purchased it for SM and it works great.

pasted_image (resized).pngpasted_image (resized).png

#8207 2 years ago
Quoted from Pin-Pilot:

Looking for part #A-7563-1 (could also be #A-7563)
Match Unit Armature Arm.
This is for my Williams Grand Prix
Here are a couple pictures
TIA[quoted image][quoted image][quoted image]

I have a complete unit I bought off of Flippers, no longer need (cant sell you just the armature) PM me

#8208 2 years ago
Quoted from Coyote:

Hey guys -
Looking for a WMS '75 Credit Wheel. I have one, but the mount is off by 90-degrees. (At 0 credits on the mech, the wheel will read 14.)
Willing to trade mine (which is in really good condition) for one that works!

I have one that should work. Let me look what kind of shape it’s in. Either way it’s yours for the cost of shipping if you want it.

#8209 2 years ago
Quoted from Murphdom:

I have one that should work. Let me look what kind of shape it’s in. Either way it’s yours for the cost of shipping if you want it.

Appreciated!

#8210 2 years ago
Quoted from Pin-Pilot:

Looking for part #A-7563-1 (could also be #A-7563)
Match Unit Armature Arm.
This is for my Williams Grand Prix
Here are a couple pictures
TIA[quoted image][quoted image][quoted image]

I have one without the spring, if that will work.

#8211 2 years ago
Quoted from John_In_WI:

I have one without the spring, if that will work.

That is a start, Ill PM you.

#8212 2 years ago

PM sent

#8213 2 years ago

How about planetary pinball aka bay area amusements?
8$

pasted_image (resized).pngpasted_image (resized).png
#8214 2 years ago
Quoted from Pin-Pilot:

Looking for part #A-7563-1 (could also be #A-7563)
Match Unit Armature Arm.
This is for my Williams Grand Prix
Here are a couple pictures
TIA[quoted image][quoted image][quoted image]

Quoted from PinballAir:

How about planetary pinball aka bay area amusements?
8$
[quoted image]

http://www.planetarypinball.com/mm5/graphics/00000001/EM-A-7563L.jpg
http://www.planetarypinball.com/mm5/merchant.mvc?Screen=PROD&Product_Code=EM-A-7563

#8215 2 years ago

Hey, thanks PinballAir & vec-tor - That is perfect. I looked at several retail sites however neglected to check PP.

This is one of the best things about this site. So many resources and eyeballs willing to help.

#8216 2 years ago

Looking for a complete plastic set for Sky Jump.

#8217 2 years ago

Shout out of thanks to Mike G/ MRG50 from Pa. for the free coin entry plate. After years of giving away parts I am on the receiving end for a change.
This forum and thread and all the generous EM lovers are what make this hobby great.
Bob/Drain1.........in Vermont

#8218 2 years ago

Yes, I have done several "just cover shipping" deals. This is a great thread!

#8219 2 years ago

WTB: Gottlieb Gigi control board with tilt mechanism. Must be in good shape and not hacked up. Mine has been butchered and I need a nice one.
Regards
Ray

#8220 2 years ago
Quoted from vengineering:

WTB: Gottlieb Gigi control board with tilt mechanism. Must be in good shape and not hacked up. Mine has been butchered and I need a nice one.
Regards
Ray

The tilt board? Mercury switches etc? Pic?

#8221 2 years ago

I am looking for a lockdown bar for a gottlieb world champ.
single player wood rail with the metal bracket.

#8222 2 years ago
Quoted from Wyomingballer:

I am looking for a lockdown bar for a gottlieb world champ.
single player wood rail with the metal bracket.

In stock at Pinball Resource, part#
Gtb-D1008 for $95.00. Spend $100 or more on goods to receive 10% off. http://www.pbresource.com/lockdb.html

#8223 2 years ago

Still looking for the center checkered plastic for a Gottlieb Spin Out. If you have a whole repro set or original set I’m interested!

Thanks!

#8224 2 years ago
Quoted from Phillips88:

Still looking for the center checkered plastic for a Gottlieb Spin Out. If you have a whole repro set or original set I’m interested!
Thanks!

have a complete (less centre plastic) set - i'm in australia but happy to ship.

they are 9.5/10 condition, no chips or cracks

#8225 2 years ago
Quoted from bluespin:

In stock at Pinball Resource, part#
Gtb-D1008 for $95.00. Spend $100 or more on goods to receive 10% off. http://www.pbresource.com/lockdb.html

I was planning on calling them if I could not find one on here. Thanks!

#8226 2 years ago

Hello,
I'm trying to save a Bow and Arrow and the rodents took up residency in the belly.
Does anyone have a pic of the mech board so I can relabel the relays.
thanks

#8227 2 years ago

Does anyone have spare parts for a Gottlieb coin door? I'm, in need of the brackets (and coin return rods) that hold the coin mech's in for a three slot door.

Oh! and a rounded coin chute.

Thanks

#8228 2 years ago
Quoted from DropTarget:

Does anyone have spare parts for a Gottlieb coin door? I'm, in need of the brackets (and coin return rods) that hold the coin mech's in for a three slot door.
Oh! and a rounded coin chute.
Thanks

I can probably fix you up. Im at expo currently, will be bach to the parts bin Tuesday

#8229 2 years ago
Quoted from pinhead52:

I can probably fix you up. Im at expo currently, will be bach to the parts bin Tuesday

Great Ken. I'll pm you.

How's the expo going?

#8230 2 years ago

I need the spring or the assembly that the flipper buttons operate to make the switch. My springs are toast for both sides. The left and right assemblies will also work. This is for a 1959 Gottlieb Around the World pin.

295367EC-A754-4C93-8BA9-73AF732C6EE8 (resized).jpeg295367EC-A754-4C93-8BA9-73AF732C6EE8 (resized).jpegE68ABAAA-2124-44D8-B035-10397304A862 (resized).jpegE68ABAAA-2124-44D8-B035-10397304A862 (resized).jpeg
#8231 2 years ago
Quoted from Silverstreak02:

I need the spring or the assembly that the flipper buttons operate to make the switch. My springs are toast for both sides. The left and right assemblies will also work. This is for a 1959 Gottlieb Around the World pin.[quoted image][quoted image]

OUCH!

#8232 2 years ago

somebody was looking for an encap to a late 60s lockdown bar, welled encap style, the bar I have has the left, missing the right.

#8233 2 years ago

Hello, does anyone have a Bow and Arrow that can send me a pic of the belly mech board so I can relabel the relays. thanks

#8234 2 years ago
Quoted from pinhead52:

somebody was looking for an encap to a late 60s lockdown bar, welled encap style, the bar I have has the left, missing the right.

1stpinballdave was looking for this.

#8235 2 years ago
Quoted from onefunbug:

Hello, does anyone have a Bow and Arrow that can send me a pic of the belly mech board so I can relabel the relays. thanks

Here is what I could find... it is a start on your project
pasted_image (resized).pngpasted_image (resized).png

#8236 2 years ago

@onefunbug
14 Bank
( mounting Board )
As used in Hi-Deal
-----------------------
[ front strip ][ front to back ]
2ND COIN SETUP
COIN
2ND COIN CHUTE
3RD COIN CHUTE
CREDIT
LOCK
RESET
[ end of strip ]
[ front strip ][continued ]
DELAY
OUTHOLE
BALL INDEX
TILT
EXTRA BALL
OUT BONUS SCORE
3000
[ end of strip ]
{from Bally parts book}

#8237 2 years ago

@onefunbug
5 Bank
( mounting Board )
As used in Hi-Deal
-----------------------
[ left back strip ][ back to front ]
500 POINT
BONUS HOLE SCORE
5000 BONUS HOLE
PLAYER RESET
TOP HOLE AND CENTER TARGET
[ end of strip ]
{from Bally parts book}

I do not know if this is correct...
regards.

#8238 2 years ago
Quoted from onefunbug:

Hello, does anyone have a Bow and Arrow that can send me a pic of the belly mech board so I can relabel the relays. thanks

It looks like Vec-tor's listing is accurate.

IMG_0765 (resized).JPGIMG_0765 (resized).JPGIMG_0766 (resized).JPGIMG_0766 (resized).JPGIMG_0767 (resized).JPGIMG_0767 (resized).JPG
#8239 2 years ago

I need a back door for a Bally Twin Win (which is an older style 4 player head). Anyone have anything local to Central Pa? Please PM me. Thanks

#8240 2 years ago
Quoted from vec-tor:

Here is what I could find... it is a start on your project
[quoted image]

Quoted from Mopar:

It looks like Vec-tor's listing is accurate.
[quoted image][quoted image][quoted image]

Thank you very much vec-tor and Mopar
I'm trying to do my part to keep a game from someone's burn pile.

#8241 2 years ago

Hello, trying to find a Wade Krause Centigrade 37 playfield or similar. I didn’t think I would ever find the game to own but I did, unfortunately after Wade was sold out. Thanks.

image (resized).jpgimage (resized).jpg
#8242 2 years ago

Guy near me is selling a Bally Aladdins Castle, missing the back box. Anyone know of a back box out there for this machine.

65705C35-5FE3-44D6-A696-3D1412585599 (resized).png65705C35-5FE3-44D6-A696-3D1412585599 (resized).png
#8243 2 years ago
Quoted from nomo:

Guy near me is selling a Bally Aladdins Castle, missing the back box. Anyone know of a back box out there for this machine.

Contact pinhead52 on Pinside.

#8244 2 years ago
Quoted from EM-PINMAN:

Contact pinhead52 on Pinside.

yep, got 1 in surplus. was going to scavenge some parts but...

#8245 2 years ago

Hey guys -
Could use some Williams 70-80's coin door parts.

Had a shell and then another one that was missing some items or had some that were mangled.

Anyone have any of the following laying around, let me know!

- Lockout wire for Dimes, Quarter and Nickles (12A-6398)
- Coin Return flap (1A-3508)
- Metal Coin Bezel for Nickles (1A-4215-1) (don't care what coin it is for, as long as a nickle fits through it, heh. The Quarter one is too narrow!)
- Coin switch trigger wire/spring & the plastic .. uh, disk thing that the spring mounts in and activates the coin switch.

Everything else I need I an get from online vendors, for sure.
Appreciated, and will have some extra parts to offer to folks once I get to reassembling the door.

#8246 2 years ago
Quoted from Coyote:

Hey guys -
Could use some Williams 70-80's coin door parts.
Had a shell and then another one that was missing some items or had some that were mangled.
Anyone have any of the following laying around, let me know!
- Lockout wire for Dimes, Quarter and Nickles (12A-6398)
- Coin Return flap (1A-3508)
- Metal Coin Bezel for Nickles (1A-4215-1) (don't care what coin it is for, as long as a nickle fits through it, heh. The Quarter one is too narrow!)
- Coin switch trigger wire/spring & the plastic .. uh, disk thing that the spring mounts in and activates the coin switch.
Everything else I need I an get from online vendors, for sure.
Appreciated, and will have some extra parts to offer to folks once I get to reassembling the door.

Coyote inquire
@BobLangelius
Has made some Williams coin door parts. System 3 --- system 7

#8247 2 years ago
Quoted from vec-tor:

Coyote inquire
BobLangelius
Has made some Williams coin door parts. System 3 --- system 7

Sending him a ping, thanks!

#8248 2 years ago

Looking for backdoors to fit the following :

Gottlieb Jet Spin
Gottlieb Sing Along

I don't always see updates, please drop a DM too if you can help.

Thanks!

#8249 2 years ago
Quoted from Coyote:

Hey guys -
Could use some Williams 70-80's coin door parts.
Had a shell and then another one that was missing some items or had some that were mangled.
Anyone have any of the following laying around, let me know!
- Lockout wire for Dimes, Quarter and Nickles (12A-6398)
- Coin Return flap (1A-3508)
- Metal Coin Bezel for Nickles (1A-4215-1) (don't care what coin it is for, as long as a nickle fits through it, heh. The Quarter one is too narrow!)
- Coin switch trigger wire/spring & the plastic .. uh, disk thing that the spring mounts in and activates the coin switch.
Everything else I need I an get from online vendors, for sure.
Appreciated, and will have some extra parts to offer to folks once I get to reassembling the door.

Still looking. Sadly, BobLangelius doesn't currently have anything I can use; though he is working on stuff down the line.

#8250 2 years ago

Looking for a plastic set for a Williams Olympic Hockey. Message me if you have anything, all or part. I could use a back glass too.

960B9C51-FFBB-4895-8107-E180573C01D9 (resized).jpeg960B9C51-FFBB-4895-8107-E180573C01D9 (resized).jpeg
Promoted items from the Pinside Marketplace
$ 12.50
Lighting - Led
RoyGBev Pinball
Led
There are 10,305 posts in this topic. You are on page 165 of 207.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/the-em-seeking-parts-thread/page/165?hl=silverstreak02 and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.