Looking for a Spin Out plastic that goes above the kickout hole between the roto target. Thanks!
(Topic ID: 93586)
Linked Games
"300"
Gottlieb, 1975-
2001
Gottlieb, 1971
-
8 Ball
Williams, 1966
-
Abra Ca Dabra
Gottlieb, 1975
-
Amigo
Bally, 1974
-
Aquarius
Gottlieb, 1970
-
Atlantis
Gottlieb, 1975
-
Bank-A-Ball
Gottlieb, 1965
There are more than 8 games linked to this topic.
Click here to show all linked games
Click here to show all linked games
Topic Gallery
Marietta, GA
Quoted from pinhead52:I need a curved wire lane guide, 7 inches between holes (probably 7.5 inches long) Evel Knievel EM
thanks
ken
If you haven’t already bent your own .. I have this one. 7 inches between holes straight across and 7.5 inches when you’re follow the curve.
Mike V
Quoted from Phillips88:Looking for a Spin Out plastic that goes above the kickout hole between the roto target. Thanks!
Yes often missing from machines. If you are not successful in finding one fairly easy to make one as I did during earlier restoration. If you wish to go that route I am happy to provide you with the file to fabricate the water decal.
Quoted from RacingPin:If you haven’t already bent your own .. I have this one. 7 inches between holes straight across and 7.5 inches when you’re follow the curve.
Mike V
[quoted image]
thanks Mike
I need a Coin Return Housing #B-7193, a Coin Door Return Flap (part # ?) and a metal score reel drum #B-3134 for 1965 Gottlieb Bank-A-Ball.
Added over 3 years ago:Just need the Coin Return Housing #B-7193.
Quoted from Murphdom:Here’s a reach…Anyone have a spare King of Diamonds playfield?
You didn’t mention what shape but here’s one. I like touching up/repainting playfields
and this one is especially doable although definitely time consuming.
ebay.com link: Gottlieb King of Diamonds Pinball Game Machine Playfield EM Wedgehead
Quoted from Sea_Wolf:You didn’t mention what shape but here’s one. I like touching up/repainting playfields
and this one is especially doable although definitely time consuming.
ebay.com link: Gottlieb King of Diamonds Pinball Game Machine Playfield EM Wedgehead
That one is a little on the rough side... But doable. I have a KoD pf with kinkyinky currently, he's done like 4-5 of these. Ask him for a quote...(~800 etc)
ken
Quoted from onefunbug:Hello, I'm working on my Bow and Arrow and I need the flasher motor or complete unit. I've read that this was used in several different machines.
Beware that while Flasher Units were used in at least half a dozen games, they're not all the same. There were at least three different versions used with different motors and contact boards. Unfortunately Bow and Arrow used unique parts. You might find one but I'd research fixing the one you have if possible too. More info at https://online.fliphtml5.com/vrtyz/wddl/#p=110
Quoted from RacingPin:If you haven’t already bent your own .. I have this one. 7 inches between holes straight across and 7.5 inches when you’re follow the curve.
Mike V
[quoted image]
Interesting take on a home made wire bender:
Thanks, got the wire inbound from RacingPin . Still in need of an alternating cog that in found in a 00-90 unit. As pictured below. Score reels and some mini steppers just have a 9s rollover cog, I need this fancy alternate each step cog...
thanks
pasted_image (resized).pngI’m looking for the right side prop rod for the early 70s Bally machines with the lift up glass. My Space Time is missing the right hand one.
Thanks for reading,
Dave
Adelaide
I'm looking for a plastic set for Gottlieb "Strange World". NOS or repro set is a dream but may possible. A good used set would work.
Quoted from fingersport:I'm looking for a plastic set for Gottlieb "Strange World". NOS or repro set is a dream but may possible. A good used set would work.
With Wade set to do the pf shortly... we need Shay to get this reproduced...
Today I had my order built up enough to put one in, so I called Steve and during
our conversation, pop bumper sockets are no longer in stock, and it may be quite
some time (even ever) before he has any.
Does anyone know of another source that supplies pop bumper sockets for #47 (well
#51 is what we all mostly use) bulbs? When I'm rebuilding Pops, I'd much rather go new
on the sockets. Marcos has sockets, but doesn't look like any for the #51 bulbs..
Quoted from Mopar:Today I had my order built up enough to put one in, so I called Steve and during
our conversation, pop bumper sockets are no longer in stock, and it may be quite
some time (even ever) before he has any.
Does anyone know of another source that supplies pop bumper sockets for #47 (well
#51 is what we all mostly use) bulbs? When I'm rebuilding Pops, I'd much rather go new
on the sockets. Marcos has sockets, but doesn't look like any for the #51 bulbs..
I may have some new ones. Please remind me via private message.
Colsterworth
HI, looking for a few items Chicago Coin Rodeo rifle game related please: -
8 track player and tape for Chicago Coin Rodeo
Speakers and loom for the above if you have it
Looking for wipers for the shot counter please, mine have all been soldered together i guess they got broke some time ago.
Chicago Coin Sighting Bracket
If you have got these and or have a Rodeo with these in, but do not wish to sell, if yo can provide photos of what you have got that would be great please. I have a Rodeo but it is a bit poorly and needs a fair bit of TLC.
Hope you can help.
Thanks
John
UK
Quoted from pinhead52:Ok anybody have pieces to a 70s bally score motor? I need either a 4 bump Bakelite disk or the more common 5 bump disk
Disks actually have 2x bumps due to 180 degree per cycle etc.
REM has the whole score motor for $125 but thats a little rich...[quoted image]
I have such a score motor for parts, will check for 4 or 5 cam bumps per 180 degrees.
Stand by.
Quoted from Drain1:I need one of these. Do not care what the coin or plays says. From a 1971 Wms...............Yukon.
[quoted image]
Pinball Resource signature part.
Screen Shot 2021-10-19 at 9.34.41 AM (resized).pngQuoted from Murphdom:Anyone have a spare one of these they are willing to sell?
I may have some, off white and yellow. I can check later today.
Quoted from pinhead52:Ok anybody have pieces to a 70s bally score motor? I need either a 4 bump Bakelite disk or the more common 5 bump disk
Disks actually have 2x bumps due to 180 degree per cycle etc.
REM has the whole score motor for $125 but thats a little rich...[quoted image]
Got a 5 bump cam disk, also 3 and 6 and 1 bumps. Yours, free. Send addr.
20211019_104501 (resized).jpgQuoted from undrdog:I may have some, off white and yellow. I can check later today.
Edit: Sorry, mine are much shorter.
Quoted from Drain1:Got a 5 bump cam disk, also 3 and 6 and 1 bumps. Yours, free. Send addr.[quoted image]
thanks for the offer, one inbound from a FB buddy and the Steve at PBR sourced one.
thanks again
ken
Also looking for a backdoor for an early 70’s Williams single player. I have a spare 4 player if anyone needs it.
Quoted from B1ffB0ff:HI, looking for a few items Chicago Coin Rodeo rifle game
Check with Johns jukes. Flippers.com
Almost any small body 8 track player from ebay will work
Picked a 1966 Bally Bazaar project and it needs a decent BG. Willing to wait till Pinfest if you prefer not to ship. Also need a set of schematics. PM if you can help.
I realize this is a seeking and not offering thread but I had Balls-a-Poppin plastics made.
Not scanned, digitized. The yellow may be slightly off, but clear as the real deal. If anyone
could possibly use a set, I can send them in a decal form, and yes, they do get applied on
the bottom side of the lexan.. My cost would be your cost..
IMG_0745 (resized).JPGIMG_0747 (resized).JPGQuoted from WeirPinball:Listed my super rare Gtb Knock Out pf (original) in the marketplace
[quoted image]
Did you do a swap? Let’s see!
Quoted from Murphdom:Did you do a swap? Let’s see!
ko (resized).jpgQuoted from Murphdom:I’m looking for one of these if anyone has one
[quoted image][quoted image]
That's a dead bumper
http://www.pbresource.com/pfbumpb.htm
Quoted from WeirPinball:That's a dead bumper
http://www.pbresource.com/pfbumpb.htm
He wants an older one or its not going to match
Quoted from pinhead52:He wants an older one or its not going to match
I may have one - let me look
DSCN1732 (resized).JPGQuoted from pinhead52:He wants an older one or its not going to match
If anything, maybe replace as a set.
Quoted from Murphdom:I’m looking for one of these if anyone has one
[quoted image][quoted image]
I have a few. Message me.
The more I think about it…I think I’m going to go new. Sorry purists. Thank you to those who offered the pop bumper bodies
Quoted from Murphdom:I’m looking for one of these if anyone has one
[quoted image][quoted image]
Here's what I have available. Top row are passive pop bumper housings. The others are active pop bumper housings.
As I recall, Pinball Resource never had duplicate repros. Instead, PBR had more angular replacements.
20211023_231350 (resized).jpgPromoted items from Pinside Marketplace and Pinside Shops!
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
