"300"
Gottlieb, 1975
2001
Gottlieb, 1971
8 Ball
Williams, 1966
Abra Ca Dabra
Gottlieb, 1975
Amigo
Bally, 1974
Aquarius
Gottlieb, 1970
Atlantis
Gottlieb, 1975
Bank-A-Ball
Gottlieb, 1965Quoted from pinhead52:Found 6 6hole "ghost white" skirts... close
Ghost white... that's a good way to put it.
They 'are' semi-transparent, aren't they?
Well..... sounds like anybody looking for the ghost white 'pop bumper' skirts will be in luck anyway.
Quoted from DorkInAbox:I'm looking for a playfield and a back door for my Big Brave project. I'll be at the York show.
Quoted from Pinballprowess:Looking for a dead bumper skirt, the color used on Ice Revue. It's white but not the typical white you would get from PBR. The best way I can describe the color, is how low fat milk looks... kind of like someone added water to it.
The sad part is... MikeO 'gave' me a complete set some time back... 'including' the dead bumper skirt!
Think I can find it now that I need it?? Heeeell NO... and I've looked high and low around here but just don't know what I DID with them. I sure didn't throw them out. Grrrrr!
But the good news is, I 'do' have extra pop bumper skirts in that color, if anyone has a chipped skirt and needs one.
I’ve got these. They are marblized milky white
Mike V
4A9087CB-4987-4D5D-AAD6-585D830E7E06 (resized).jpeg893C9970-F288-40C1-9DA8-F0BBF494667B (resized).jpegA421E443-6409-46F9-960E-1656BF477BFF (resized).jpeg
Quoted from RacingPin:I’ve got these. They are marblized milky white
Mike V
[quoted image][quoted image][quoted image]
PM sent
Quoted from PinballAir:That big brave is a crying shame
I’ve got a different two words to describe it and who did that but you’re right.
Rhymes with sure coughs.
Need one short (1”) stainless faceted Gtb post. This is for 1964 Happy Clown.
PBR doesn’t have them and I didn’t see them at Marcos.
These are a two piece post. The bases are the same, but the top piece comes in tall or short. I need one base and a short top, 1” put together.
EC02BED8-CADD-49F5-800B-B3D8F49C6F15 (resized).jpegQuoted from undrdog:Need one short (1”) stainless faceted Gtb post.
For Amusement Only might still have some. http://foramusementonly.to/
Quoted from undrdog:Need one short (1”) stainless faceted Gtb post. This is for 1964 Happy Clown.
PBR doesn’t have them and I didn’t see them at Marcos.
These are a two piece post. The bases are the same, but the top piece comes in tall or short. I need one base and a short top, 1” put together.[quoted image]
I can spare one (not stainless steel)
Quoted from pinhead52:I can spare one (not stainless steel)
Thanks, Ken. Do you still have my address?
Quoted from pinhead52:I need a 70's Bally chime unit. I have a Gottlieb unit I could trade...
Not this one, I hope!
123_1 (resized).jpgQuoted from Pinballprowess:Ghost white... that's a good way to put it.
They 'are' semi-transparent, aren't they?
Well..... sounds like anybody looking for the ghost white 'pop bumper' skirts will be in luck anyway.
If all goes according to plan...
I may be able to help someone looking for the... elusive ghost white 'dead' bumper skirt as well.
If all goes according to plan.
Quoted from pinhead52:I need a 70's Bally chime unit. I have a Gottlieb unit I could trade...
If got this secondary one. Not sure if you can build upon it
F183C6DE-07FC-4BE5-BFD5-40A26E804151 (resized).jpeg831990F3-4EF7-44CE-9B41-080902009616 (resized).jpeg6E50AF9C-1DA4-4567-AE62-5CB4BB29CBC2 (resized).jpeg
Mike V
Quoted from jrpinball:Not this one, I hope![quoted image]
what? it will clean up! i'll put contact paper on it.
Quoted from RacingPin:If got this secondary one. Not sure if you can build upon it
[quoted image][quoted image][quoted image]
Mike V
That is fixable... However I just got offered a complete one minus the harness. Thanks anyway RacingPin
Quoted from Peruman:Looking for a lockdown bar for a 1970 Gottlieb Groovy. PBR does not make the repros anymore
Thanks
Alberto
Welded encap? I have a spare.
Quoted from RacingPin:If got this secondary one. Not sure if you can build upon it
[quoted image][quoted image][quoted image]
Mike V
Believe it or not, that's a complete unit. It's from an early SS Bally.
They had a second chime box with only one chime bar as well as the three bar one. It provided the fourth note when a credit was added and the tune "The Call to the Post" played. I believe it was also the low note which sounded when you got the 50,000 point outlane award on "Mata Hari".
Quoted from RacingPin:got this secondary one.
Oh, I guess that's what you mean by a secondary one! 
Quoted from 890khz:Wanted: Internal "Motor Board" for a Gottlieb "Slick Chick" (1963) [the board with score motor and transformer mounted]. Help ! I've got a nice machine but it's missing the motor board. Thanks for looking !
Man, there must be a pinball sadist up your way, or was years ago. How is it that you have come across so many incomplete games; missing this or that?
Quoted from sagejr:Who knew that old EM chime units were in such demand and so expensive! I surely did not.
Yes they are.
Quoted from Pin-Pilot:Yes they are.
Was merely looking to find a Gottlieb or Bally Chime unit to transplant into my Solar Ride because I think it would sound better.
Quoted from Bublehead:The virtual pinball cabinet makers are buying up old chime units I'm afraid...
guilty, adds so much realism. I have also have put 3 units in my gottlieb system1 pins, and 1 unit in my homebrew.. dang I've bought more than I thought.
Quoted from Geofflove:Does anyone have a schematic for a Bally magic circle? Nothing on ipdb. Anyone got a pdf? Cheers.
Quoted from Pinbub:Already posted a classified ads but figured it couldn't hurt to post here.
I'm looking for a Top Score backglass.
I might be able to help you with a backglass. If you dont find one in a few weeks, let me know.
Quoted from Pinbub:Already posted a classified ads but figured it couldn't hurt to post here.
I'm looking for a Top Score backglass.
Has bgresto changed something or is it that you don’t want to wait that long to get it?
I could have sworn they had it listed as a backglass they’ve done before.
Be interesting to know for me because I was getting ready to order a new BG from them for my Night Rider. Any info would be appreciated.
Quoted from Sea_Wolf:Has bgresto changed something or is it that you don’t want to wait that long to get it?
I could have sworn they had it listed as a backglass they’ve done before.
Be interesting to know for me because I was getting ready to order a new BG from them for my Night Rider. Any info would be appreciated.
I have a nice NR EM glass I’ll sell. I sent you a PM.
Quoted from Ed_in_Texas:I have a nice NR EM glass I’ll sell. I sent you a PM.
Thanks, PM sent back.
Quoted from megoman:Looking for a diamond shaped bumper for a 1947 Gottlieb Lucky Star. Anyone have one? I’m flexible regarding cap as I know most got disfigured from heat.
Please message me if have
Thanks
[quoted image]
PM sent
16328695794864728683793491843659 (resized).jpgQuoted from pinhead52:I need a curved wire lane guide, 7 inches between holes (probably 7.5 inches long) Evel Knievel EM
thanks
ken
Hey Ken,
You can make your own wires. Buy a piece of piano wire from your local hardware store and bend one into shape. I have made several different ball guides. Not too difficult.
Quoted from pinhead52:I need a curved wire lane guide, 7 inches between holes (probably 7.5 inches long) Evel Knievel EM
thanks
ken
Vid wrote a great article on how to make your own ball guides.
https://pinside.com/pinball/forum/topic/making-new-ball-guides-from-scratch-vids-guide
Quoted from Pin-Pilot:I think he was in search of a WIRE guide. Not metal guide.
Try this article. https://pinside.com/pinball/forum/topic/wire-ball-guide-help
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-em-seeking-parts-thread/page/163?hl=megoman and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Anaheim, CA
Newcastle On Tyne