Quoted from pinhead52:I need a knocker assy to a late model bally game. The night rider I just picked up is missing thisat bare minimum I'd take the knocker plunger, Marco has the rest.
Ken
Here is one: ebay.com link: itm
Quoted from EM-PINMAN:Here is one: ebay.com link: itm
That’s Pinsider rixzilla. Pinsiders RacingPin Rixzilla and Gott_Lieb always have good parts for sale.
WTB left sling shot plastic for Hit the Deck. Long shot but maybe the two similar titles use the same artwork hopefully. Steve Young doesn’t have them.
Unfortunately, the spinner on my Gottlieb Buccaneer has really taken its toll on the AS match relay. No amount of adjusting will make up for the slop in the fit between the armature plate and coil frame.
Does anyone have a good original armature plate (GTB-A14044) and armature frame (GTB-C8750) or a complete relay that they would sell? The arrows below point to the wear areas. The armature plate is out of stock at PBR.
Thank you!
Quoted from No_Skill:I'm looking for the top playfield glass bracket for my Old Chicago. I'm not finding them on the usual websites. Anyone have a source? Mine is pretty rough.
[quoted image]
If all resources fail, you may have to have the part re-plated.
Quoted from Gotemwill:Unfortunately, the spinner on my Gottlieb Buccaneer has really taken its toll on the AS match relay. No amount of adjusting will make up for the slop in the fit between the armature plate and coil frame.
Does anyone have a good original armature plate (GTB-A14044) and armature frame (GTB-C8750) or a complete relay that they would sell? The arrows below point to the wear areas. The armature plate is out of stock at PBR.
Thank you!
[quoted image]
Thanks for the help pinhead52 !
This thread is an incredible resource for keeping these old machines going. Thanks for all those who stand by ready to help.
Quoted from No_Skill:I'm looking for the top playfield glass bracket for my Old Chicago. I'm not finding them on the usual websites. Anyone have a source? Mine is pretty rough.
[quoted image]
I have a minor stock in these, i get them replated... shoot me a pm
Schematic needed for Gottlieb Bronco. Anyone got one spare they are selling. I'm in UK. Happy to pay what's needed. I has one on order from Mike's Pinball but I've just received a refund. No message so I'm guessing he doesn't have it or something.
Looking for a coin door for a 1965 Williams like Teachers pet, Eager Beaver etc. No dents but as long as it is straight, I can repaint.
Quoted from Geofflove:Schematic needed for Gottlieb Bronco. Anyone got one spare they are selling.
Just go to PBR.
Quoted from Mastkey:Looking for a coin door for a 1965 Williams like Teachers pet, Eager Beaver etc. No dents but as long as it is straight, I can repaint.
I also need a Teacher's Pet coin door, or just the coin shoot.
Quoted from No_Skill:I'm looking for the top playfield glass bracket for my Old Chicago. I'm not finding them on the usual websites. Anyone have a source? Mine is pretty rough.
[quoted image]
I just pulled one of these out of a rusty Space Mission -
If you don't want to go the re-plating route,
I used Evaporust and then sanded all the flakey junk off of it with 200 grit sand paper, then prepped it with metal etching primer and finished with satin white.
Quoted from Elysiom:For a Space Mission does anyone know where I could get these things -
They are plastic ball gates at both sides of the kicker next to the flipper bat at the bottom of the playfield.
[quoted image][quoted image]
Scroll down. http://www.pbresource.com/rollover.htm
Quoted from No_Skill:I'm looking for the back panel for my Old Chicago. This is my first EM, so I'm not sure if I'm missing any associated brackets as well.
[quoted image]
1) Back Door P-630-10
2) Back Door Bracket P-6229-98
-- 2a; Hardware
Quoted from No_Skill:Do you have a source?
Sadly you need to find someone in your area to reproduce the parts...
One guy was selling the Bally back door... P-630-10
Maybe a pinsider has the parts...
I used a machine shop to reproduce a back door a few years ago...
Quoted from No_Skill:I'm looking for the back panel for my Old Chicago. This is my first EM, so I'm not sure if I'm missing any associated brackets as well.
[quoted image]
Wouldn’t your back door have the same dimensions, like my back door on a Bow and Arrow machine from 1975? How about making a back door out of plywood, heck you can paint it silver and use that until you track down an original…Just a suggestion.
I can give you the dimensions of my back door if you go that route.
Quoted from MH:Wouldn’t your back door have the same dimensions, like my back door on a Bow and Arrow machine from 1975? How about making a back door out of plywood, heck you can paint it silver and use that until you track down an original…Just a suggestion.
I can give you the dimensions of my back door if you go that route.
That'd be great. Maybe some photos too?
Make a temp back door out of rigid foam insulation, foil backed. Easy to cut.
Re route that power cord thru the slot in the pedestal.
Quoted from No_Skill:I'm looking for the back panel for my Old Chicago. This is my first EM, so I'm not sure if I'm missing any associated brackets as well.
[quoted image]
I have the back door and the trough it sits in. It would run you $75 but shipping it maybe a lot. I can just sell you the trough
for $25 as the s/h won’t be too bad. You can have them made at a metal shop but there prices have gone up a bunch. 7 years ago I had one made for $45 and now they want $200.
Quoted from No_Skill:I'm looking for the back panel for my Old Chicago. This is my first EM, so I'm not sure if I'm missing any associated brackets as well.
Go to Home Depot and buy the channel...large assortment. Here's an example: Then make a door....as others have suggested.
Screen Shot 2021-08-29 at 8.30.43 AM (resized).pngQuoted from No_Skill:I'm looking for the back panel for my Old Chicago. This is my first EM, so I'm not sure if I'm missing any associated brackets as well.
[quoted image]
Clay Harrel (Pinsider @cfh) made a great YouTube video on how to make back doors at home.
Quoted from Drain1:Make a temp back door out of rigid foam insulation, foil backed. Easy to cut.
Re route that power cord thru the slot in the pedestal.
Yep I know I have the cord routed incorrectly. I've been doing a lot of work and that makes taking the relay board out much faster.
Quoted from bluespin:Clay Harrel (Pinsider cfh) made a great YouTube video on how to make back doors at home.
Very nice. Thank you.
Still looking for a correct Gottlieb AS/FS relay armature plate. Ad here:
https://pinside.com/pinball/forum/topic/wanted-em-gottlieb-as-fs-relay-part
130DD725-BCAE-4600-B22E-527F2CA32E83 (resized).jpeg8C8AC4CE-0A37-40C5-A4FF-48CE6D35E16E (resized).jpegI need a return spring to a williams mini stepper (Grand Prix roll-under spinner).
would take the whole mini stepper if available.
The pic shows the spring coil on the working spinner, non functioning spinner missing this ity bity coil return spring.
thanks
Id take the whole spinner unit as well
pasted_image (resized).png
Quoted from Gotemwill:Still looking for a correct Gottlieb AS/FS relay armature plate. Ad here:
https://pinside.com/pinball/forum/topic/wanted-em-gottlieb-as-fs-relay-part[quoted image][quoted image]
https://www.facebook.com/PreservationPinballParts/photos/464057780385083
Quoted from pinhead52:I need a return spring to a williams mini stepper (Grand Prix roll-under spinner).
would take the whole mini stepper if available.
The pic shows the spring coil on the working spinner, non functioning spinner missing this ity bity coil return spring.
thanks
Id take the whole spinner unit as well
[quoted image]
[quoted image]
I believe I have an entire unit. I'll dig it out and send pics.
I could use 1 of this type of ball gate that goes on the shooter lane of Aladdin’s Castle and on the right upper return lane on Wizard! If anyone has an extra.
It measures right at 3 1/4” long and I don’t need the screws. I figured PBR and Marco would have them but Marco didn’t last time I checked and I can’t find it on the PBR website and am trying to avoid a phone call lecture. Thanks.
5FE6A5FC-41C8-4598-8237-8F07B429757C (resized).jpegQuoted from John_In_WI:I believe I have an entire unit. I'll dig it out and send pics.
I do have an entire unit, except for the spring you need. Sorry. Good luck with the search.
Quoted from Sea_Wolf:I could use 1 of this type of ball gate that goes on the shooter lane of Aladdin’s Castle and on the right upper return lane on Wizard! If anyone has an extra.
It measures right at 3 1/4” long and I don’t need the screws. I figured PBR and Marco would have them but Marco didn’t last time I checked and I can’t find it on the PBR website and am trying to avoid a phone call lecture. Thanks.[quoted image]
#ASE-2250-24 Ball Gate & Wire.
consisting of:
--- Bracket P-5867-12
---Wire M-1272-17
As used on the following games...
1) Fireball
2)El Toro
3)Monte Carlo
4)Odds & Evens
5)Nip-It
6)Amigo
7) Knockout
8) Wizard
9) Freedom
10) Evel Knievel
11) Supersonic
12) Dolly Parton
13) Future Spa
14) Nitro Ground Shaker
15) Silver Ball Mania
16) Mystic
17) Skateball
18) Frontier
19) Embryon
20) Medusa
21) Elektra
22) Vector
Looking for the metal sprockets of Grand Prix right and left bonus units, will consider complete bonus units as well.
Quoted from Sea_Wolf:I could use 1 of this type of ball gate that goes on the shooter lane of Aladdin’s Castle and on the right upper return lane on Wizard! If anyone has an extra.
It measures right at 3 1/4” long and I don’t need the screws. I figured PBR and Marco would have them but Marco didn’t last time I checked and I can’t find it on the PBR website and am trying to avoid a phone call lecture. Thanks.[quoted image]
I have this one that measures 3 1/4” but it looks a bit different.
Mike V
Quoted from pinhead52:I need a return spring to a williams mini stepper
I think this is the one:
https://flippers.com/catalog_oc/index.php?route=product/search&search=10A-323
Quoted from MarkG:I think this is the one:
https://flippers.com/catalog_oc/index.php?route=product/search&search=10A-323
Yes indeed! Ordered.
THANKS
Quoted from RacingPin:I have this one that measures 3 1/4” but it looks a bit different.
Mike V
Thanks Mike. It would probably work if you can part with it. I’d be interested in seeing it if you could post a pic.
Danny
Quoted from vec-tor:#ASE-2250-24 Ball Gate & Wire.
consisting of:
--- Bracket P-5867-12
---Wire M-1272-17
As used on the following games...
1) Fireball
2)El Toro
3)Monte Carlo
4)Odds & Evens
5)Nip-It
6)Amigo
7) Knockout
8) Wizard
9) Freedom
10) Evel Knievel
11) Supersonic
12) Dolly Parton
13) Future Spa
14) Nitro Ground Shaker
15) Silver Ball Mania
16) Mystic
17) Skateball
18) Frontier
19) Embryon
20) Medusa
21) Elektra
22) Vector
Thanks for that @vec-tor. Are those bracket and wire numbers from PBR?
That’s exactly what I need it for, my Nitro Ground Shaker. I swapped it to put on my Wizard! because it came without one.
ive got original backglass if anyone in need for,
Chicago coin The Thing
Hi Deal
Time zone
official baseball
Quoted from Sea_Wolf:Thanks for that vec-tor. Are those bracket and wire numbers from PBR?
That’s exactly what I need it for, my Nitro Ground Shaker. I swapped it to put on my Wizard! because it came without one.
Bally Master Parts Manual...
I listed all the contemporary games that uses that gate assembly part, in case someone has
parted out a game I listed, and would have the correct part for you...
Quoted from vec-tor:Bally Master Parts Manual...
I listed all the contemporary games that uses that gate assembly part, in case someone has
parted out a game I listed, and would have the correct part for you...
Got it. Thank you.
Quoted from Sea_Wolf:Thanks Mike. It would probably work if you can part with it. I’d be interested in seeing it if you could post a pic.
Danny
Here is pic
Quoted from RacingPin:Here is pic
[quoted image]
Thanks for the picture. That looks like the one that Marco offered but I’m afraid that the shorter area on it where the ball passes through might get in the way.
Appreciate the effort.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-em-seeking-parts-thread/page/161 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.