(Topic ID: 93586)
Linked Games
"300"
Gottlieb, 1975-
2001
Gottlieb, 1971
-
8 Ball
Williams, 1966
-
Abra Ca Dabra
Gottlieb, 1975
-
Amigo
Bally, 1974
-
Aquarius
Gottlieb, 1970
-
Atlantis
Gottlieb, 1975
-
Bank-A-Ball
Gottlieb, 1965
There are more than 8 games linked to this topic.
Click here to show all linked games
Click here to show all linked games
Topic Gallery
Whitehall, PA
Anyone happen to have one of these? It’s a metal bracket/assembly off the coin mechanism of a Chicago coin game. There are two of them. They hold coin until either the player loses and the coin is released to the coin box or if the player wins it’s released back to the player. A very small coil goes inside of the two parts. I included a picture of it as well. I am in need of these coils too, if anyone can identify them for me? Thanks
2 pictures of the coil and 2 of the assembly I'm searching for.
685FF993-0338-44D7-B7CF-1E8E5A24BEC8 (resized).jpeg8C655C0A-07FD-488F-AF2E-AA75940FB0A6 (resized).jpegAC44D611-54E1-43D2-8BC8-B7EF5C988A3B (resized).jpegDF40001A-C4BF-4131-A909-AE770B80241D (resized).jpegQuoted from Vic_Camp:Is there anyone around strictly selling shuffle alley and ball bowlers parts?
I have a friend that needs an early 1950’s pin reset motor for a United Star Shuffle pick bowler.
Vic you might try this CA dude
Quoted from pinhead52:Vic you might try this CA dude
dallas.craigslist.org link
Thanks Ken
Quoted from Vic_Camp:Is there anyone around strictly selling shuffle alley and ball bowlers parts?
You could try Chris at St Louis ball bowler. He’s pretty active in the shuffle puck and ball bowler Facebook group and has a lot of parts that aren’t listed on the site https://www.stl-bb.com/
Quoted from jdapolito:Anyone have a backglass for a Chicago coin Hi-Score Pool
I checked with homestead and Mayfair and no luck
Try posting in this forum.
https://pinside.com/pinball/forum/topic/looking-for-backglass-and-translites-thread-buy-sell-trade/page/13#post-6163528
If you’re on Facebook pm me as I have links for three Facebook parts groups on my desktop.
Quoted from steviechs:You could try Chris at St Louis ball bowler. He’s pretty active in the shuffle puck and ball bowler Facebook group and has a lot of parts that aren’t listed on the site https://www.stl-bb.com/
I 2nd that. He's got tons of parts.
Quoted from Dono:Anyone have a Bally over the top buzzer? I don't believe they've been repro'd. Yet another part hacked away from my acquired OC.
You would have to find someone parting out an old Bally machine. But I would try this for $10 and give it a try.
ebay.com link: Simplex Small Buzzer 4000 12 120 VAC 50 60 Hz 597B For Appliances
Quoted from Playdium:You would have to find someone parting out an old Bally machine. But I would try this for $10 and give it a try.
ebay.com link: Simplex Small Buzzer 4000 12 120 VAC 50 60 Hz 597B For Appliances
Did not even think to look elsewhere, thanks for the tip.
Quoted from ibis:I’ve never heard of the Bally over the top buzzer. Anyone have a pic?
From a Bally Hokus Pokus
IMG_7541 copy (resized).jpgQuoted from nocreditdot:Looking for a gottlieb chime unit. PM if you have one.
If you get truly desperate. https://www.chimeunit.com/chime-units
Thanks. I saw that. Kinda pricey with shipping
Quoted from newmantjn:If you get truly desperate. https://www.chimeunit.com/chime-units
Uxbridge, ON
Quoted from nocreditdot:Looking for a gottlieb chime unit. PM if you have one.
You should specify if you are looking for the EM version (coils are A-5195) or the System 1 version (coils are A-17876 with diodes). The EM version runs on AC and the SS runs on DC. If you get the wrong version you will probably want to swap the coils and have to add that to the cost.
I had to work through the same issue when I was searching for a chime unit. https://pinside.com/pinball/forum/topic/correct-chime-for-sinbad#post-6094969
Gottlieb 2001 has a 2-part flipper button bushing that is installed in the side of the cabinet. These bushing are no longer available from Steve Young. Does anyone have a new or used set for sale? I would prefer to replace them on both sides of the cabinet.
Thanks in advance!
Quoted from Dono:Anyone have a Bally over the top buzzer? I don't believe they've been repro'd. Yet another part hacked away from my acquired OC.
I scored a buzzer, thanks everyone!
Quoted from Steve_in_Escalon:Gottlieb 2001 has a 2-part flipper button bushing that is installed in the side of the cabinet. These bushing are no longer available from Steve Young. Does anyone have a new or used set for sale? I would prefer to replace them on both sides of the cabinet.
Thanks in advance!
Can you post a photo? If so, I will check my inventory.
Quoted from ZNET:Can you post a photo? If so, I will check my inventory.
I need two of the bushings pictured. I was mistaken thinking they were a two-piece bushing.
Thanks (again) in advance.
bushing 1 (resized).jpgbushing 2 (resized).jpgQuoted from Jets_1479:Does anybody know where one can find the stylus tips for EM gun games? Specifically Chicago coin, game is rifle gallery.
Flippers.com
Johns Jukes
John is a great guy. You can find him posting on RGP. You can contact him at his website. His prices can be higher but sometimes he is the only game in town.
HINT: if you have the manual and know a part number for something you are looking for, just google the part number. There is nothing to lose and many times you will find out who might be selling one.
How about a 50s Gottlieb woodrail coin door hinge? Anyone got one kicking around or know where I can get one? Will be about 5 1/2 inches long.....
Quoted from PinballAir:Flippers.com
Johns Jukes
John is a great guy. You can find him posting on RGP. You can contact him at his website. His prices can be higher but sometimes he is the only game in town.
John had them and they have been ordered. Thanks for the tip!
Steve (in Las Vegas)
I’m looking for a nice set of Allied Leisure legs if anyone has a set. AL hole spacing is 2 1/2” from leg bolt center to center. Most other pin manufacturers are 2 1/4” spacing.
Quoted from insight75:How about a 50s Gottlieb woodrail coin door hinge? Anyone got one kicking around or know where I can get one? Will be about 5 1/2 inches long.....
I need to find one also, but in no rush. When I get a free moment, I'm guessing I can match something up from Mcmaster.com.
Quoted from waltrr:I need to find one also, but in no rush. When I get a free moment, I'm guessing I can match something up from Mcmaster.com.
Yes I think I'll try to do the same and fabricate. Right now I just made it the older style without the hinge....no rush here either.
Anyone have a line on a E-119-354 score motor? Not having any luck finding this one world wide web. This would be for a Bally EM Flip Flop. Thanx in advance.
Quoted from jwwhite15:Anyone have a line on a E-119-354 score motor? Not having any luck finding this one world wide web. This would be for a Bally EM Flip Flop. Thanx in advance.
This pinsider is parting out a Bally Kick Off; I'm purchasing a few parts from him but reasonably sure that motor is available and matches your needs... link below.
Quoted from undrdog:I’m considering a 1961 Gottlieb game that is missing it’s lockdown bar. Are these available?
pbr $91 as long as its the thin bar, separate shooter... whats the game?
I'm helping a gal find an OXO backglass for a game that has sentimental value to her. She probably would be happy with any 6/10+. I'm sure some that have been replaced would be more than good enough for her. Her's is jacked. She needs it shipped to Bozeman, MT. She would take a repro or translite, too. She's not picky. LMK if you have any tips. Thanks. Please PM me if you post because I don't get on pinside as much anymore. TIA.
2021-03-15 12.14.37 (resized).jpgOXO (Williams 1973) (resized).pngJust posted some metal parts on the marketplace that I removed from a roached Jumping Jack cabinet after I did a cabinet swap. Honestly, I would just give these to someone if they will use/can pick up. I really just wanted to save them from the trash.
Quoted from SadSack:I'm helping a gal find an OXO backglass for a game that has sentimental value to her. She probably would be happy with any 6/10+. I'm sure some that have been replaced would be more than good enough for her. Her's is jacked. She needs it shipped to Bozeman, MT. She would take a repro or translite, too. She's not picky. LMK if you have any tips. Thanks. Please PM me if you post because I don't get on pinside as much anymore. TIA.
[quoted image][quoted image]
For anyone looking for backglasses, you can always try posting in this forum:
https://pinside.com/pinball/forum/topic/looking-for-backglass-and-translites-thread-buy-sell-trade
Quoted from SadSack:I'm helping a gal find an OXO backglass for a game that has sentimental value to her. She probably would be happy with any 6/10+. I'm sure some that have been replaced would be more than good enough for her. Her's is jacked. She needs it shipped to Bozeman, MT. She would take a repro or translite, too. She's not picky. LMK if you have any tips. Thanks. Please PM me if you post because I don't get on pinside as much anymore. TIA.
[quoted image][quoted image]
If it is truly the sentimental game you indicate, and she can afford the cost, get a repro from BGResto here:
http://bgresto.com/?p=478
It looks like the rest of her game is decent.
Quoted from bluespin:For anyone looking for backglasses, you can always try posting in this forum:
https://pinside.com/pinball/forum/topic/looking-for-backglass-and-translites-thread-buy-sell-trade
Quoted from MikeO:If it is truly the sentimental game you indicate, and she can afford the cost, get a repro from BGResto here:
http://bgresto.com/?p=478
It looks like the rest of her game is decent.
Thanks for the tips. This board is great. I think the lady is going to go with BGResto for the OXO.
Quoted from Jets_1479:Anyone have a spare trim plate for the top of a Bally coin door? It’s a Bally amigo, 1974. Just needing the top piece only. And 2 screws lol!
[quoted image][quoted image]
yea, Ive got one. you will have to tear a lot apart to get to it though. I can probably dig up 2 bolts too.
pasted_image (resized).pngGonna send you a PM. Thanks!
Quoted from pinhead52:yea, Ive got one. you will have to tear a lot apart to get to it though. I can probably dig up 2 bolts too.
[quoted image]
Quoted from goldenboy232:Hi guys, still trying to source one of these "ratchet springs" (looks like a stainless switch blade without the contact) for a Gottlieb mini-stepper relay.
The original part number is GTB A-8740 but Steve does not stock them. Anyone have a good one they can sell me?[quoted image]
I think I have a couple in my junk pile. Would that be buried in the middle of a match unit? If this is it, shoot me a PM.
20210317_202534 (resized).jpgI am looking to source one eight pin Jones plug. Anyone know the best place to source (besides the obvious eBay?). I’ve been burnt buying so many parts and items that were misrepresented, I rather avoid it 
Quoted from MiamiRedSkin:I am looking to source one eight pin Jones plug. Anyone know the best place to source (besides the obvious eBay?). I’ve been burnt buying so many parts and items that were misrepresented, I rather avoid it
Do you have the parameters for the part?
1) what game/what location/single sided/double sided, etc.etc.etc.
Quoted from insight75:How about a 50s Gottlieb woodrail coin door hinge? Anyone got one kicking around or know where I can get one? Will be about 5 1/2 inches long.....
I think I might have one, let me see if I kept it when I dismantled an old 1957 gottlieb cabinet. You say it’s about 5 inches?
Quoted from MiamiRedSkin:I am looking to source one eight pin Jones plug. Anyone know the best place to source (besides the obvious eBay?). I’ve been burnt buying so many parts and items that were misrepresented, I rather avoid it
I'll send you one for the price of shipping
Promoted items from Pinside Marketplace and Pinside Shops!
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
