Quoted from MikeO:Use the #10 through playfield threaded base. It will endure the punishment it will get better.
Agree. Also, you probably will need to drill out the hole for #10 and add a #10 tee nut.
Quoted from MikeO:Use the #10 through playfield threaded base. It will endure the punishment it will get better.
Agree. Also, you probably will need to drill out the hole for #10 and add a #10 tee nut.
Quoted from JethroP:Agree. Also, you probably will need to drill out the hole for #10 and add a #10 tee nut.
Make sure there is room to place the t-nut before you drill it.
Hello, I picked up a Top Score a few weeks ago and in need of 2 red bonus balls that go in the backglass. Anyone have any extras or have a lead where to get acouple from. Thanks
Quoted from RGarriott:Hello, I picked up a Top Score a few weeks ago and in need of 2 red bonus balls that go in the backglass. Anyone have any extras or have a lead where to get acouple from. Thanks
I couldn't find any when I was working on my soccer. I ended up buying 12 mini foozball balls.
Make sure you get the right diameter. They come in different sizes. 32mm and 36mm.
I needed the 32mm size.
Quoted from ArgosySK:I couldn't find any when I was working on my soccer. I ended up buying 12 mini foozball balls.
Make sure you get the right diameter. They come in different sizes. 32mm and 36mm.
I needed the 32mm size.
Thanks for the heads up. I have our local arcade guy keeping an eye out for them also. Ive never been a Foozball guy, are they light like a pingpong ball, or do they have a little mass to them? And does it really matter?
Right on. Im finding alot of soccer ball style balls on ebay, were you able to find just plain red ?
Quoted from SadSack:Make sure there is room to place the t-nut before you drill it.
A T-nut isn't necessary. A washer and nut will do fine.
Yes, if it interferes with something on the bottom side of the playfield you'll have to reconcile that interference.
Quoted from Pinball-DOOD:score switch for a pop bumper assembly.
I have had to make that part from Pinball Resource...
( Leaf switch medium thickness, and contact points )
Quoted from vec-tor:I have had to make that part from Pinball Resource...
( Leaf switch medium thickness, and contact points )
Gotcha! How would I make it?
Quoted from vec-tor:I have had to make that part from Pinball Resource...
( Leaf switch medium thickness, and contact points )
If you decide you don’t want to buy the parts and make one I’ll send you the bottom switch blade from this stack for the cost of postage
044D9A7A-C95B-4F01-A22A-941BE77BB5DC (resized).jpeg
Mike V
Quoted from RacingPin:If you decide you don’t want to buy the parts and make one I’ll send you the bottom switch blade from this stack for the cost of postage
[quoted image]
Mike V
Perfect! Thanks.
Quoted from Pinball-DOOD:Hey all! Working on a Gottlieb 1957 World Champ and need two parts. I need a coil for the “10,000” stepper unit and a score switch for a pop bumper assembly. I have attached a picture, it’s the bottom switch. Thanks!
[quoted image]
I can probably get you a coil for that stepper also. There is a 4 digit or so number (maybe a letter too) etched on the side of the coil. If it is missing the coil altogether then get a pic of the stepper
Mike V
Quoted from RacingPin:I can probably get you a coil for that stepper also. There is a 4 digit or so number (maybe a letter too) etched on the side of the coil. If it is missing the coil altogether then get a pic of the stepper
Mike V
Sounds good, thanks!
I will get a picture soon!
Quoted from Pinball-DOOD:Hey all! Working on a Gottlieb 1957 World Champ and need two parts. I need a coil for the “10,000” stepper unit and a score switch for a pop bumper assembly. I have attached a picture, it’s the bottom switch. Thanks!
[quoted image]
Here is pic of the coil specs you sent me
2C63C0E3-7074-4C8D-B1C6-F09EC4859C29 (resized).jpegQuoted from RacingPin:Here is pic of the coil specs you sent me[quoted image]
Hmmm, maybe I am messed up. It’s a larger coil that is behind the stepper to the bottom right.
C8B68174-DBEF-417E-9140-86D4A0D4F1C1 (resized).jpegQuoted from Pinball-DOOD:It’s the coil that makes that unit move. It’s so burnt that the plunger is buckled
I would guess A-1496 .. not the one you pm-ed me
Mike V
Quoted from RacingPin:I would guess A-1496 ..
Sounds right.
Gottlieb 58 catalog small step switch (resized).jpg
Quoted from RacingPin:I would guess A-1496 .. not the one you pm-ed me
Mike V
Terrific! Do you have this one?
Anyone know of a place to get parts for Chicago coin games? It’s not a pin but I have begun work on a rifle gallery. Started with the seized up timer unit. Torsion spring is snapped in 3 places. Trying to find one or at least something i can bend to make work. The diameter outer edges is 3/8” it’s 3/8” tall, has 21-23 (depends on how you count) windings. I see a Bally spring on PBR the cosmetically looks close enough, but it doesn’t have technical specs so I did email them. Thought I’d see if anyone knows of anything else I can try? Thanks everyone! Picture for reference.
1F50E65C-36E8-46A1-933E-293D6A8C5062 (resized).jpeg33E0D2C4-FEFE-40C7-A282-B5B5A10A550A (resized).jpeg5FB968F2-76CD-49C3-8B34-0260CCF1D8D3 (resized).jpeg9BE27632-3290-49B1-A4E0-8EB0BBC8B83D (resized).jpegA few more pictures for reference of where it goes.
Quoted from Jets_1479:Anyone know of a place to get parts for Chicago coin games? It’s not a pin but I have begun work on a rifle gallery. Started with the seized up timer unit. Torsion spring is snapped in 3 places. Trying to find one or at least something i can bend to make work. The diameter outer edges is 3/8” it’s 3/8” tall, has 21-23 (depends on how you count) windings. I see a Bally spring on PBR the cosmetically looks close enough, but it doesn’t have technical specs so I did email them. Thought I’d see if anyone knows of anything else I can try? Thanks everyone! Picture for reference.
[quoted image][quoted image][quoted image][quoted image]
Quoted from Jets_1479:A few more pictures for reference of where it goes.
[quoted image][quoted image]
I would try CDI Torsion Spring 130-905.
If no one has it, give me a DM.
Hello i'm in the middle of my 1973 Midway Duck Hunt project and still cannot locate a couple of parts. Hoping that someone in here has these last 3 coin door parts I need. I have 1 coin chute but it is taped together otherwise it would fall apart. Ideally someone has 2 they would part with otherwise I would be elated with just the 1 i'm missing. 2nd thing i'm missing is the bracket that holds on the slam switch as i'm actually missing the whole slam switch also. Final thing is the bracket that holds on the coin drop switch. Please send me a pm if you have any of these parts that I am in need of. Not looking for a free handout either just really need to find these parts and cross this coin door off the list. Thanks for any help, Bill.
20210215_130925 (resized).jpg16134167321892278774513956307357 (resized).jpg16134166706581471679968028936094 (resized).jpgAnyone out there got a tilt Bob and the hang wire that goes with it for a Bally? It’s for a 1974 Bally Amigo. Please PM me with details of you have one lying around! Picture of the inside of my game for reference. I have the ball that goes in the track coming any day now.
727C554C-8CAF-47C3-91FC-2A63E6C6689A (resized).jpegQuoted from Jets_1479:Anyone out there got a tilt Bob and the hang wire that goes with it for a Bally?
You check PBResource?
Yes,
They have the Bob but are out of stock on the wire. Hoping someone here has one I can purchase as both pieces together....
Quoted from Catch86:You check PBResource?
Quoted from Jets_1479:Anyone out there got a tilt Bob and the hang wire that goes with it for a Bally? It’s for a 1974 Bally Amigo. Please PM me with details of you have one lying around! Picture of the inside of my game for reference. I have the ball that goes in the track coming any day now.
[quoted image]
I’ve got this one:
Mike V
thanks! Send you a PM
Quoted from RacingPin:I’ve got this one:
[quoted image]
Mike V
Howdy.
I’m looking to buy a backbox/head for a 1970 Bally single player. No “guts” or game specific parts needed. Just a solid box. Going in a trail drive
If you have one- pm me? Happy to pay for shipping of course
Thx
Pete
Hi all,
Just picked up a Gottlieb Twin Bill and there are some missing parts..... First is the wooden coin door is missing.....anyone happen to have one kicking around? . If its loaded that would be better since the wires were just cut off (why do people do the things they do!).... Will need some other things but figured I would start here..... Also, anyone have any spare cloth covered wiring so I can do some patching? Thanks.
Could anyone tell me which flipper boots to order from Steve Young for a 1957 Gottlieb World Champ? Thanks!
Quoted from insight75:Hi all,
Just picked up a Gottlieb Twin Bill and there are some missing parts..... First is the wooden coin door is missing.....anyone happen to have one kicking around? . If its loaded that would be better since the wires were just cut off (why do people do the things they do!).... Will need some other things but figured I would start here..... Also, anyone have any spare cloth covered wiring so I can do some patching? Thanks.
[quoted image][quoted image]
What a shame! Why,why,why.
Bumping to see if anyone may have a spare torsion spring lying around for a Chicago coin timer? 130-905 part number PBR does not have it.
Quoted from Jets_1479:A few more pictures for reference of where it goes.
[quoted image][quoted image]
Quoted from Murphdom:Parting out a Williams Fan-tas-tic if anyone needs any Williams parts
Sent you a PM.
OMG! Thank you!!!
I’ll PM you as well!
Quoted from PinballAir:I might have that CC spring. I will look around tonight.
May have gotten lost in my previous post.......anyone have a small pile of old cloth wiring they would be willing to give up?
Quoted from insight75:May have gotten lost in my previous post.......anyone have a small pile of old cloth wiring they would be willing to give up?
Can you list all the wire combinations you need?
It might help a pinsider to look at what they have?
1) Approximate length of wire. eg two feet?
2) Diameter of wire. eg heavy gauge awe 18.
3) Color code of wire. eg white with red stripe.
Quoted from vec-tor:Can you list all the wire combinations you need?
It might help a pinsider to look at what they have?
1) Approximate length of wire. eg two feet?
2) Diameter of wire. eg heavy gauge awe 18.
3) Color code of wire. eg white with red stripe.
OK fair questions.....I will sort out exactly what I need and post. Thank you.
Quoted from insight75:OK fair questions.....I will sort out exactly what I need and post. Thank you.
Let me know - I have a wiring harness from a '75 Jubilee that I can send out. Condition is.. eh. But it's cloth.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-em-seeking-parts-thread/page/147?hl=chas10e and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.