Looking for early 50’s Gottlieb red rollover buttons that are in better shape than these. I realize that new ones are available but I am trying to keep this game in original condition and would like them to match the overall game condition.

Thanks!

7B8C913D-C600-4F53-95D9-A65B4482052C (resized).jpeg

Yes, Thanks! Hoping someone has an original, but I may have to go that route if all else fails. Noticed they don’t have a DIY switch blade with the side lugs.

Hoping someone out there has the switch, or even an entire score reel assembly.

Hey guys, I’m looking for the plastic resonator box for a chime unit. Here’s a pic for reference that I grabbed off the web.

B30BD443-CE69-4259-9156-BBFB49C37BDB (resized).jpeg

I checked a 1960 score reel I have and it has some side mount switches but they appear to be more levels than yours. I also have a set of 1963 score reels from a 63 p/b .. I can’t quite see in them to see the exact switch. I’ll get a better look and get back with you

Mike V

Thanks!!! Fingers crossed! My game is also a 1963 game.
Here is a photo of one of these switches mounted to the flange of the score reel plate/frame...
-Jeff

126E69D7-AA7B-4912-84BB-F21FC2E00502 (resized).jpeg

Wow .. that is a hard switch to find. They must have updated those score reels every year. And it is only on certain reels in 63 too. Here you go

C78DA8CF-C629-4790-BA22-12BA3ED33A31 (resized).jpegC397137D-8E26-4744-9DB4-D4A87432700F (resized).jpeg

https://www.facebook.com/groups/299213816922644/permalink/1721249464719065/
Head door for multi player gottlieb. Always in high demand

Eureka!!! That’s the one! PM sent!!

An elusive switch for sure. I have another game made just a year later and the entire score reel mech design had completely changed.

Thanks so much for your help!
-Jeff

you saw this?
https://www.facebook.com/groups/299213816922644/permalink/1721249464719065/

Looking for sound cards/amps for the following games:

Sega Jet Rocket
Williams Stockade

I have a sound card for sale from a Chicago Coin Baseball Champ.

Message me, Thanks!

Look 2 posts above yours, I just posted a link for your door though it’s a bit pricy at $75

I had one made locally once. A tin knocker bent it up for like $15 or something.

Didn’t find a foul bar as circled in this photo, So I made one out of polished stainless steel.

9B5F48E5-39C2-476D-8D67-09AFD3C49D76 (resized).jpeg

B6817F2E-4238-43A3-86D2-9C2D16444855 (resized).png

CEC8319D-6508-4BC8-AE8A-1B5A41628AF4 (resized).jpeg

Edit 12/3 - it’s going to pinhead52...

I still have this Gottlieb EM coin door minus the outer skin. I sent pinhead52 a message but if anyone else wants it just pay for shipping.

0EA8C0BE-849A-4971-BA94-3CF891E63A0F (resized).jpeg1238D466-BA34-4556-AFE9-DE3EEE4BC019 (resized).jpeg4A99BB43-A940-4314-A745-AB507B83B1CA (resized).jpeg58EEC200-B4D1-421F-8235-3B51D874812D (resized).jpegF2A5BE4B-296D-4D63-BB8C-4BDC18B1BDC3 (resized).jpeg

Super! I just spent $65 on ebay but I'll save that for another project. What I really need is the eject system and the coin mech holders but I'll take the whole assy.

Funny about 2 months ago somebody was looking for the eject assy and I sent him what i had. And wouldnt you know a month later I get a game in where it is missing... But this is a great community, I try to give back more than I get...

Seeking the following:
Gottlieb Dancing Lady - Red 10x playfield insert
Williams Super Star - 2 White caps for the out lane posts
Williams Supense - Bonus Wheel plastic without burn marks

I used to make these a long time ago and sell them to Marco and PBR specifically for Banzai Run (a lot more expensive now). But they work perfectly on Super Star. They're not white, but they actually look better than the white inside the red star.

https://www.marcospecialties.com/pinball-parts/23-6623

Did you find your red rollovers and are any of your white sockets broken?

I’ve been hoarding this little part for a while with the intention of repurposing for our Stern Nine Ball. I’m no longer planning on doing so.

I believe (not certain though) it’s original to a Williams Liberty Bell, Grand Prix and likely others.

Make me an offer.

It’s a red rectangular stand up target.

89A32A42-C36D-46D6-B679-50A483687ABD (resized).jpegB6F84EE8-7742-45A8-BC3E-8A04892A0CC7 (resized).jpeg

I am still looking for original red rollovers.

By white sockets, I assume you mean the plastics in the gobble holes? A couple of mine are cracked on the inside. Would be interested in originals of these as well.

Still looking for an original, matching lockdown bar! Not convinced this one is correct based on fit and finish.
F0024225-A1B1-4672-9CAA-1B68BDB60352 (resized).jpegF96AFE52-8FD7-4B4E-B701-494F2A17394E (resized).jpeg

I was asking about the white inserts the red rollovers are in. I can help you with the red rollovers, I have some NOS stock,
just checking to see if you're sockets are still good.
Walt

The white inserts are good. I’ll send you a PM. Thanks!

Anybody have a caster receiver for a 1956 Gottlieb Gladiator? Or a few? I’m missing one, and two others look shredded and crumbling from rust.

This is only my second woodrail, but I’d imagine these particular wooden legs and receivers were also used on other Gottliebs.

40D47CFC-26D5-46E1-B5D3-B4A751C815B2 (resized).jpeg9484C86B-5A9B-4F73-B3A2-9B6F3711C90B (resized).jpegD3EC5E49-5CEA-4922-BE75-9E994C532347 (resized).jpeg
4203F040-E1AC-4797-9384-8392E07CC242 (resized).jpeg

Isn't that just a standard Tee Nut?

Yes, standard tee nut and you can use regular levelers. Something charming about the old style though...

Ironically, shortly after I posted that I was pulling into Lowe’s. It looked slightly different than a normal tee nut at a glance, but I had grabbed these anyway. Should work. Thanks fellas.

I’ll be checking back in here as I start going through this thing.

A3612917-6FAE-4A4A-A791-3E9FF86ABA63 (resized).jpeg

B521B067-3119-4EC2-8089-A14B0B499B9E (resized).jpeg

Definitely. And with a woodrail, I’d like to try to keep it original as possible. Unlike the other games I restore.

Looking for either a Bally Wizard Bonus Unit or at least the plastic gear.

As you can see my new project pin’s plastic gear’s teeth are worn to hell. Thanks.

2443AFED-FCCB-44AC-B969-438CA47EB6D6 (resized).jpeg

61CB26F9-686A-45C6-937D-E022E6B8EA0A (resized).jpeg

Anybody know how the hell to get this backglass out without removing the top triangular braces inside?

Even when I flap the light panel down, it’s still hitting the supports up top. Not much leeway to angle it. Molding on the front has nowhere to be removed either.

I thought it would come out like the glasses do on a wedgehead.

9800E151-EA8C-4279-8E78-F2D1216FA026 (resized).jpegA337F7D2-014C-47DD-9C1B-40C2BE7D56F1 (resized).jpeg

Looking for a score reel part for a wiliams blast off. It looks like a pcb but is part of a switch. Really id buy all 4 score reel mechanisms if the price is right. I will attach a pic of the part I really need

68EAF861-711F-41CF-BD63-B18FA9DD329E (resized).jpeg

Damn, that was burning for quite a bit.

Can the bottom of the glass move towards the rear a little then drop down into a slot allowing you to rotate the top out (carefully)?

Nope. Tried that. Not enough space.

Yeah. Funny thing is, the machine worked great till i turned it on one afternoon and it wouldn’t start

I'm working on a Jolly Joker and had the same problem. I had to remove the brackets at the bottom. See the pic.

IMG_1835_crop (resized).jpg

Damn. I was hoping it wouldn’t come to removing hardware. So be it, but doesn’t make sense for serviceability. Thanks man!!

I am having a hard time finding parts for a 1948 Chicago coin pinball. PBR and Marco do not seem to have much. In particular I am looking for 1/2" coil stops for kickout and flipper coils. Also some of the coils are not easy to find. Any suggestions for parts. I've even had to manufacture some of my parts so far.

Ive got one of these, shoot me a pm

pasted_image (resized).png

pasted_imagew (resized).png

and then take your belt sander to those corners!

6 screws. You'll be OK. Label them so they all go back in the same holes.

That is a Bally standup target.

OUCH! That calls for a CNC cut pcb.

I know this is probably a *long* shot, but does anyone have an early Bally lockdown bar? 1963-ish vintage.

Looking for a ball count unit for a king of diamonds game

I’m looking for the wiper on the Advance stepper for a Flipper Pool. If no one has the exact piece, I’m sure a similar shaped wiper from another game would work, I would just have to reconfigure the fingers. If anyone has a good photo, that would be appreciated too. Thanks

Part found! Thanks to pinhead52 for keeping an eye out for me.

Would love to find a replacement door for a 1971 Gottlieb 4 Square. The current door was drilled in three places to install a security bar.

Updated to include picture.

20201210_092449 (resized).jpg

Only $137 plus shipping from pbr, what more could you want?

Watch ebay, occasionally there is a deal there. I take doors and get them rechromed for $60 then add them to a job for $80. But when they have been drilled cant rechrome and I just toss.

Ken

That is always an option, and may end up having to go that way since when they drilled the cabinet they drilled out a bit of the door frame as well.