Looking for a pf to a Williams 1969 Smart Set. Im restoring this game and the one I have is pretty trashed
Still looking for 2 white 'flipper looking' lane guides.
Used on games such as Central Park and Hurdy Gurdy.
Quoted from Bonk:Looking for a lock down bar
I may have a spare one (though am not sure if it’s for a late 40s Williams machine). Do you know the dimensions of a late 40s Williams lockdown bar? Or can you at least measure the distance between the bolt holes for the lockdown bar on your cabinet (and maybe the distance from each hole to each side of the cabinet)? At least that way I can check to see if I have one that could work for you.
Quoted from Pinballprowess:Still looking for 2 white 'flipper looking' lane guides.
Used on games such as Central Park and Hurdy Gurdy.
Pinball Resource has these (P/N A857W). I restored a Central Park earlier this year and that's what I used as the upper ball guides. Only thing you'll need to do is trim out the inner plastic "ribs" with a dremel.
blank flippers (resized).pngQuoted from tfduda:I may have a spare one (though am not sure if it’s for a late 40s Williams machine). Do you know the dimensions of a late 40s Williams lockdown bar? Or can you at least measure the distance between the bolt holes for the lockdown bar on your cabinet (and maybe the distance from each hole to each side of the cabinet)? At least that way I can check to see if I have one that could work for you.
PM sent. Thanks!
Quoted from rlbohon3:Pinball Resource has these (P/N A857W). I restored a Central Park earlier this year and that's what I used as the upper ball guides. Only thing you'll need to do is trim out the inner plastic "ribs" with a dremel. [quoted image]
Yes, I know... I bought a set.
Not what I'm looking for... but thank you for responding.
Looking for the upper deck home run catch pan, with or without (preferably with) the plastic for a 1968 Williams Ball Park.
Or something similar from another game that might work.
Thanks in advance.
* pics from IMDB and Planetary Pinball
ball park hr catch 2 (resized).jpgball park part (resized).jpgQuoted from Pinballprowess:Yes, I know... I bought a set.
Not what I'm looking for... but thank you for responding.
So what are you looking for, Glen?
Do you have a picture you can share with us?
Quoted from nomo:Looking for this DC relay for my 1954 Bally Mystic shuffle bowler. Any ideas?
[quoted image][quoted image]
Update on this relay. The original (open coil) says 5000 ohms. I checked a friend’s machine and his measured 4950. The DC circuit runs about 90 volts. So knowing the resistance and the voltage, I started searching for suitable relays. I found a good one on Surplus Sales of Nebraska. Actually I purchased 2. It’s now working perfectly!
13B5CC92-6489-4903-9E41-8CCB204E697E (resized).jpegC0805F9A-A1BB-4D4D-B6F7-24D3397D0E49 (resized).jpegQuoted from Pinballsoul:Does anyone have the wiring harness/light sockets and coin mechs for a Williams triple action door?
I have a completely blank door.
Thank you for looking
[quoted image]
I have this one. I’ll remove it from the door skin. I’ll add the coin mechs. See PM
Quoted from stoli1:Need AS Relay Unit for Gottlieb wedgehead.
2 discs, 1 switch, 1 coil with 2 Jones plugs.
Each game is a little different. you can rewire it yourself?
Quoted from RacingPin:I have this one. I’ll remove it from the door skin. I’ll add the coin mechs. See PM
[quoted image]
Here it is disassembled and coin mechs added. Coin mechs, slam tilt bar and light sockets are a little rusty but the rest is nice
Mike V
CF504F49-CCE2-4733-B8B4-CAC43D19CA87 (resized).jpegD67A57ED-DC8B-48DB-B1E6-3DB0013F52F0 (resized).jpeg
Quoted from pinhead52:Each game is a little different. you can rewire it yourself?
No problem.
Quoted from MikeO:So what are you looking for, Glen?
Do you have a picture you can share with us?
The two top rollover lane guides used on Central Park & Hurdy Gurdy.
Don't have a picture but they look like two inch flippers but don't say "flipper" on them.
Looking for used 'original' but would gladly take NOS parts.
I think I'd be fooling myself looking for those though, since I can't seem to even find 'used'
Quoted from Pinballprowess:The two top rollover lane guides used on Central Park & Hurdy Gurdy.
Don't have a picture but they look like two inch flippers but don't say "flipper" on them.
Looking for used 'original' but would gladly take NOS parts.
I think I'd be fooling myself looking for those though, since I can't seem to even find 'used'
Are you looking for round top or flat top?
Quoted from Pinballprowess:Are there even such things as flat top lane guides?
Never seen one.
Since this guide we are speaking of resembles a flipper then... flat top flipper
pasted_image (resized).pngQuoted from Pinballprowess:Round top
So the plain repro round top didn't suit you?
That is a pretty rare bird you are looking for. Would need to come from a parted game probably.
Here is one place to ask that says he has them. It is possible they are repros from PBR but you never know until you ask. If anyone has NOS he would.
https://www.flippers.com/catalog/product_info.php/small-flipper-shell-white-p-9286
Quoted from Pinballprowess:The two top rollover lane guides used on Central Park & Hurdy Gurdy.
Don't have a picture but they look like two inch flippers but don't say "flipper" on them.
Looking for used 'original' but would gladly take NOS parts.
I think I'd be fooling myself looking for those though, since I can't seem to even find 'used'
Looks like I have one used white one with a yellowish patina and one marbled green one, both with no lettering on top as shown in attached photos.
20200930_004705 (resized).jpg20200930_004729 (resized).jpg20200930_004751 (resized).jpgQuoted from aahgo:I have two from a Hurdy Gurdy PF that I bought for parts. Unfortunately they are not in great shape. They both have cracks/crazing that look like they were over heated. Yours, if you want them.
[quoted image]
PM sent
Quoted from ZNET:Looks like I have one used white one with a yellowish patina and one marbled green one, both with no lettering on top as shown in attached photos.
[quoted image][quoted image][quoted image]
Will call
Quoted from RacingPin:Here it is disassembled and coin mechs added. Coin mechs, slam tilt bar and light sockets are a little rusty but the rest is nice
Mike V
[quoted image][quoted image]
A pleasure working with you and thank you for the super deal.
Quoted from John_in_NC:My Quick Draw project is missing the game counter. I have a spare but no mounting bracket for it.[quoted image]
Bump
Quoted from boilerman:Later game were mounted right to the board
I could but it would point up without the simple 90* “L” bracket.
Quoted from goldenboy232:Bumping in case anyone hasn't checked the thread lately and might be interested:
[quoted image]
Can you split the cost of shipping w me? Zip is 99217.
Quoted from goldenboy232:Bumping in case anyone hasn't checked the thread lately and might be interested:
[quoted image]
I'm interested in your wedgehead pieces.
Quoted from EEE:Looking for a coin entry plate for a 1977 Gottlieb large coin door, 2 or 3 coin slots.
[quoted image]
I need a backglass for a gottlieb Volley. Will make my own if I have to Anybody?
By the by I have a spare playfield to a Gottlieb GrandSlam iffin somebody wants to practice their airbrushing.
Looking for a 5 inch williams score reel, circa 1962 used on Tradewinds and other games of that era. Must have riveted circuit board with copper metal wiper. Used for replay or match.
Quoted from mrm_4:Is this someone on pinside?
muncie.craigslist.org link
That guy posts on just about every state’s Craigslist and on Mr. Pinball. Some people have had luck with him. I have struck out way too many times for fairly common things so I gave up.
Quoted from Murphdom:That guy posts on just about every state’s Craigslist and on Mr. Pinball. Some people have had luck with him. I have struck out way too many times for fairly common things so I gave up.
Bummer!!! Thanks for the heads up. Thought I found a gold mine :/
Quoted from RacingPin:Here it is disassembled and coin mechs added. Coin mechs, slam tilt bar and light sockets are a little rusty but the rest is nice
Mike V
[quoted image][quoted image]
Got my item from Mike in very short order.
Thanks Mike!!
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-em-seeking-parts-thread/page/138 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.