Quoted from Peruman:pinhead52,
I don't have any, but there's a FB marketplace add for someone parting out a Williams Toledo:
https://www.facebook.com/marketplace/item/189058222542393
Would these reels fit your machine? Guy is a great seller, I bought the chime unit and got it in the mail within a few days.
Alberto
Those were gone but I did score some off of ebay.
Quoted from DropTarget:Hi again,
I just placed my PBR order yesterday, and today found that I need a drop target reset bar nylon bushing.
Does anyone of you kind people have a spare?
TIA[quoted image]
i have a box of target banks, i'll pull it out and see whats there
Quoted from boilerman:i have a box of target banks, i'll pull it out and see whats there
TY, I should know by now to dismantle everything before placing orders.
Actually, I don't know if PBR carries the part. Marco does, but I don't see it on Steve's site. I have an email in to Jimmy.
Quoted from DropTarget:TY, I should know by now to dismantle everything before placing orders.
Actually, I don't know if PBR carries the part. Marco does, but I don't see it on Steve's site. I have an email in to Jimmy.
i found one. let see what is the cheapest way to ship this tiny part
tb (resized).jpgcarrier pigeon?
regular envelope?
I did hear back from Jimmy, He says PBR has them, part GTB-A15687. I know you took the time to find it, but if it's a hassle to ship, I'll order new ones. LMK.
Thanks again.
Quoted from DropTarget:carrier pigeon?
regular envelope?
I did hear back from Jimmy, He says PBR has them, part GTB-A15687. I know you took the time to find it, but if it's a hassle to ship, I'll order new ones. LMK.
Thanks again.
it was no trouble, i has to be a bubble mailer. it is so small but regular envelope it would get ripped due to the shape. might be better off getting it from pbr. they will charge you not sure of the price but i am sure less than a buck mine is free but they could ship cheaper due to volume
Quoted from boilerman:it was no trouble, i has to be a bubble mailer. it is so small but regular envelope it would get ripped due to the shape. might be better off getting it from pbr. they will charge you not sure of the price but i am sure less than a buck mine is free but they could ship cheaper due to volume
Thanks, I'll have them ship. .94¢ each + shipping.
Quoted from DropTarget:TY, I should know by now to dismantle everything before placing orders.
That's not going to help
Even if you dismantle everything, you will ALWAYS find another part you need AFTER you place your order!
Quoted from JethroP:That's not going to help
Even if you dismantle everything, you will ALWAYS find another part you need AFTER you place your order!
always. I wish I lived within an hour of pbr for counter service.
Quoted from pinhead52:always. I wish I lived within an hour of pbr for counter service.
I used to live 45 minutes from PBR. But that was before I was collecting pinballs or even knew who they were.
Quoted from JethroP:Even if you dismantle everything, you will ALWAYS find another part you need AFTER you place your order!
There must be a name for that.
Quoted from boilerman:need a 2 1/2" old style lane guide in yellow.. do not want a repro. want a OEM guide
i can do cash or trade..
[quoted image]
For North Star, right?
I had to go with a repro after looking for about 5 years. If you find two think of me.
Quoted from MikeO:For North Star, right?
I had to go with a repro after looking for about 5 years. If you find two think of me.
what color? i have all but a 2.5" yellow
Quoted from Tonup69:They have been out of stock for a month now. Not just PBR, but EVERYWHERE.
Did you contact PBR yourself? I would because I've called a couple of times and found they had parts that on the site were marked out of stock.
Looking for a set of 27" non ribbed chrome gottlieb legs. PBR only has 2. I bought a game without any legs so I really need 4 but they dont need to be perfect.
Quoted from SWMurphy:Looking for a set of 27" non ribbed chrome gottlieb legs. PBR only has 2. I bought a game without any legs so I really need 4 but they dont need to be perfect.
Only two, geez.
I can dig you up a set, Im actually getting the old rechromed for $15 a pop. so I have less than perfect and then a set due back. shipping will probably 25 or 30
Quoted from leckmeck:Does anybody have a good source for slotted washer-head screws that hold down the runway shield? One of these is really chewed up and it’d be a shame to use it on this game that’s getting a Wade Krause playfield.[quoted image]
Gently hammer the distorted screw heads back in place, then use a drill to spin the heads and round them with sandpaper, finish with 300-500 grit paper, then use a narrow file to recreate the slot.
are you talking about the screws used to screw down a playfield " plastic" right through the center of a post among other things? As in used on games along with the screws that have threased tops on, put the plastic on and then a nice shiney acorn nut or something similar? Im a bit dumbfounded in your description as Ive always considered those screws to be failrly common altho I must admit Ive never actually shopped for them. I mean I parted out a old williams game that was full of them and have a whole bonch of them. I must be wrong, Im confunsed!!!!Somebody please straighten my ass out!
Thanks
Quoted from weeze:are you talking about the screws used to screw down a playfield " plastic" right through the center of a post among other things? As in used on games along with the screws that have threased tops on, put the plastic on and then a nice shiney acorn nut or something similar? Im a bit dumbfounded in your description as Ive always considered those screws to be failrly common altho I must admit Ive never actually shopped for them. I mean I parted out a old williams game that was full of them and have a whole bonch of them. I must be wrong, Im confunsed!!!!Somebody please straighten my ass out!
Thanks
[quoted image]
No, just the washerhead screws used on lane dividers etc. I sent him a couple. He more than good, he's great!
aaaaaaaaaaaaaaa ha! OK, as long as hes got them, Im pretty sure I got a sizeable stash og those/
Thanks
Quoted from weeze:Somebody please straighten my ass out!
I don't know about the screws, but look at the size of those paws. That's going to be a big dog.
Quoted from goldenboy232:Hi guys, I’ve got more of the wooden wedgehead faces available. I just sold two of them this morning, so I do have a third one available if interested. The cost is $45 plus shipping.
Mark
[quoted image]
PM sent for the 3rd one
Hello,
Got this really cool Golf putter game.
Need some Jones plugs replaced.
Need a 4 plug
And a 8 plug.
Please help !
And where do I get these threaded little bulbs ?Are they 6v or 12v ?Do they make led version ?
Call text or email
8105882649
PayPal is locked and loaded to buy the plugs
175FB52F-C801-4624-9081-6CDDDC065686 (resized).jpeg09B1A4DE-A25E-415D-B0E9-19C42DB9BED3 (resized).jpeg
98D2E1B0-6218-4B0F-9DA0-70087E84C1B4 (resized).jpegFB915B77-D0EA-4EED-8CE4-B5F5D91A2FA4 (resized).jpeg8D72A907-B7E6-4DE0-8FB2-75B7112B95E9 (resized).jpeg
948C7620-29E3-410C-998D-904675DB5600 (resized).jpegD3C6C48B-1473-46CC-AD38-B0BDBCD7EF8A (resized).jpegQuoted from Wariodolby:Hello,
Got this really cool Golf putter game.
Need some Jones plugs replaced.
Need a 4 plug
And a 8 plug.
Please help !
And where do I get these threaded little bulbs ?Are they 6v or 12v ?Do they make led version ?
Call text or email
8105882649
PayPal is locked and loaded to buy the plugs
[quoted image][quoted image]
[quoted image][quoted image][quoted image]
[quoted image][quoted image]
i can help you with the jones plugs assuming the spacing is the same as gottleb
Quoted from pinhead52:i can help you with the jones plugs assuming the spacing is the same as gottleb
Here’s some pics with tape measure.
This putter has no brand name.
Have no clue who manufactured it.
Quoted from goldenboy232:Hi guys, I’ve got more of the wooden wedgehead faces available. I just sold two of them this morning, so I do have a third one available if interested. The cost is $45 plus shipping.
Mark
[quoted image]
Hi guys, I have two of these with minor flaws (I can send a video to see if you want them) that I'll sell for $40 apiece ($5 discount per face). PM me if interested with your mobile number and I can text you a video.
Also, if interested in one let me know. Once I get an order for at least 3 more I can make more.
Mark
Quoted from Wariodolby:Here’s some pics with tape measure.
This putter has no brand name.
Have no clue who manufactured it.[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
It looks really cool though
Does anyone need parts from a Gottlieb EM (Centigrade 37) door? I should have an outer skin in decent condition as well (In storage).
0358D6D4-89C5-4970-8056-90ADF70D0AEC (resized).jpeg4F2F408B-7408-423B-AA0C-DE8DFF3E4EC2 (resized).jpeg
A76E763E-64BD-4C43-B9B0-763301D84CF6 (resized).jpegEBAABE57-7EF8-4AE5-91A0-0D4469C4D476 (resized).jpeg4EE12AF8-D5A2-4189-8155-61722D19C8A3 (resized).jpeg2A744B3A-7C0E-4D4B-88C8-86D373157303 (resized).jpeg
Im in need of left side wood rail. I know pinball resource has them. Anyone have one they want to see go on a Southern Belle?
Hi all,
Murphdom and boredom have inspired me to add coin mechs back to my collection.
Can someone help out with my 1965 WMS Lucky Strike. The mech accepts Nickels, Dimes and Quarters. When they drop, each denomination of coin hits a different wire spring, that in turn trip a switch to add credits. 2 of those wires are missing on my machine (the Nickel and Dime wires). Does anyone have these type of triggers? Note, The circles aren't drawn in quite the correct spots on the attached picture, but I'm sure you get the idea.
Thanks
WMS Lucky Strike Coin springs (resized).jpgQuoted from DropTarget:Does anyone have these type of triggers?
You can make your own. Get the same size spring wire (piano wire) as the one "spring wire thing" you have. Take the one out and use it as a pattern to bend two more. Easy with two pair of needle nose pliers. If you live near a music store you can buy, or sometimes a scrap piece (a few inches) for free.
Quoted from JethroP:You can make your own. Get the same size spring wire (piano wire) as the one "spring wire thing" you have. Take the one out and use it as a pattern to bend two more. Easy with two pair of needle nose pliers. If you live near a music store you can buy, or sometimes a scrap piece (a few inches) for free.
Thanks, I considered that. I'm not certain that the missing "spring wire things" (I like saying that) are the same length and shape of the remaining one. Odds are they are though.
Quoted from MarkG:Hmm. Doesn't look like it. From the 1966 Williams parts catalog:
OK, well if they need to be bent differently to trip when the coin passes, then bend them differently. Still, you can make your own.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-em-seeking-parts-thread/page/133?hl=murphdom and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.