"300"
Gottlieb, 1975
2001
Gottlieb, 1971
8 Ball
Williams, 1966
Abra Ca Dabra
Gottlieb, 1975
Amigo
Bally, 1974
Aquarius
Gottlieb, 1970
Atlantis
Gottlieb, 1975
Bank-A-Ball
Gottlieb, 1965Quoted from Tonup69:They have been out of stock for a month now. Not just PBR, but EVERYWHERE.
Speaking of which, I called Steve yesterday to get some things and was told I couldn't get any standard 1 5/8" Gottlieb sleeves. (Or at least not the 10-15 that I wanted.) He said he didn't know when he'd have them in again, and to cut down Williams sleeves if you have them. (I do, thankfully.)
Same story for 1 13/16" sleeves.
Just a heads up if you need some or were planning to order.
Quoted from DropTarget:From what I gather, Steve's having some supply chain issues, but at least some have been resolved.
Some of the common items like sleeves, pop bumper bodiesand switches are purchased by PBR, PL and Marcos from the same vendor. If Steve’s having issues getting them, the others are already having the same issue or will soon.
Quoted from undrdog:Woo Hoo! Got my end cap!
How do I attach it? Hammer out the posts as if they were a rivet? Kind of thinking epoxy...
[quoted image][quoted image]
I ended up with a pair of these that were in a game I bought earlier this year. Each came with one screw and washer so I’m assuming you can screw it on. I haven’t tried with these yet.
4800B40F-59A1-41AC-871F-7D778A204FAC (resized).jpeg906FCEB0-58AF-4B9F-A3F7-45035310F900 (resized).jpegQuoted from undrdog:Woo Hoo! Got my end cap!
How do I attach it? Hammer out the posts as if they were a rivet? Kind of thinking epoxy...
[quoted image][quoted image]
JB weld worked well for me
Quoted from undrdog:Interesting. Mine isn’t threaded. Looks like the original was pressed on. Here is the other end of the bar
[quoted image]
I’m sure you could easily tap the holes that are there and apply a screw and washer.
Quoted from Tonup69:They have been out of stock for a month now. Not just PBR, but EVERYWHERE.
Wow. He had a crap load of them too. All gone. Doubtful he will be able to get more (I know).
Quoted from undrdog:Woo Hoo! Got my end cap!
How do I attach it? Hammer out the posts as if they were a rivet? Kind of thinking epoxy...
[quoted image][quoted image]
I used JBweld to glue on a set
Quoted from Tonup69:For some reason the old style Gottlieb pop bumper bodies are out of stock everywhere. Does anyone have four decent ones they could sell me? They don't need to be new, but not cracked or too yellow from smoke.
[quoted image]
Just got off the phone with Tony and he confirmed he has a limited number in stock and will be getting a fresh supply soon. He's the supplier to PBRESOURCE.
15936450311545983221803616489941 (resized).jpgQuoted from jrpinball:That's good news. I know Tony was the source for PBR. Glad he can supply more.
I find it better to go to the source to find accurate status of a product. I would hate to see a hoarding frenzy because everybody thinks these will no longer be available. Even if PBR doesn't get them back in stock soon you can always buy them directly from Just Push Play.
Here is a stretch but I’m looking for a Gottlieb Fun Park/ Fun Land right slingshot plastic for a friend of mine if anyone has one. Thanks.
Looking to buy some score reels to Gottlieb decagons (the round ones for 70s games) -- just need the black & white wheel with the numbers but will buy whole units if that's what you have. Need numbers in good shape (not with lots of ink smears or missing ink) for a game I'm restoring.
Would love to find 4-5 of them.
Quoted from goldenboy232:Looking to buy some score reels to Gottlieb decagons (the round ones for 70s games) -- just need the black & white wheel with the numbers but will buy whole units if that's what you have. Need numbers in good shape (not with lots of ink smears or missing ink) for a game I'm restoring.
Would love to find 4-5 of them.
got them, reach out
Quoted from jeffc:Looking for a used GTB pop bumper body with red concentric circles like pictured below. Would rather not buy a new one so that I can match it to the other used bodies I’m keeping on the game.
Thanks. [quoted image]
I'll look today, have several used pieces
Quoted from gdonovan:I'll look today, have several used pieces
I have gotten one from pinhead52 but thanks for the offer.
Quoted from Raff:Looking for 3 coil mounting brackets
Part number a-5147
[quoted image]
Raff
Pinball Resource has those. I ordered a bunch a few months back.
Quoted from Murphdom:Pinball Resource has those. I
If anyone could post me 3 of these coil brackets I pay you for them and shipping.The cost of shipping with pbr to Australia for 3 items would be to high.
Raff
Time for the next project.......
GTB Pin-Up.
Does anyone have an extra aged drop target?
I have a new one but it is waaaaay too bright.
thx.
Quoted from DropTarget:Time for the next project.......
GTB Pin-Up.
Does anyone have an extra aged drop target?
I have a new one but it is waaaaay too bright.
thx.
Which drop target specifically?
Quoted from goldenboy232:Which drop target specifically?
he said pin up? they have only one kind of dt
Quoted from Raff:Looking for 3 coil mounting brackets
Part number a-5147
[quoted image]
Raff
illawarra92 is about to get a package from PBR, these could probably hitch a ride.
20200705_142911 (resized).jpgQuoted from boilerman:he said pin up? they have only one kind of dt
Yeah, sorry, I had a brain lapse there for a minute — not sure what I was thinking.
I do have this one from one of the King Pins I restored. The bowling pin image is intact but there is a small scratch along the bottom edge of the target (you might not even see it as it's right at the edge of the playfield). Yours for the price of shipping, if interested.
C4D93E78-CB03-43AB-AD05-F1A5273F1E87 (resized).jpegE2A94B89-381C-4510-B394-96181FA250C7 (resized).jpegECE12F36-FA4E-4C07-B5A8-926A841AF136 (resized).jpeg
Quoted from pinhead52:is about to get a package from PBR, these could probably hitch a ride
Thanks pinhead, Murphdom is sending out the coil brackets.
Raff
Quoted from goldenboy232:Yeah, sorry, I had a brain lapse there for a minute — not sure what I was thinking.
I do have this one from one of the King Pins I restored. The bowling pin image is intact but there is a small scratch along the bottom edge of the target (you might not even see it as it's right at the edge of the playfield). Yours for the price of shipping, if interested.
[quoted image][quoted image][quoted image]
That one looks like it was repaired in a previous life. I'd hold out for one that has not been broken before.
Quoted from Raff:[quoted image]
Thanks Chris that's the hinge part of the doors I'm after.
Raff
I’ll send one of those too
Quoted from goldenboy232:Which drop target specifically?
What Boilerman said! 
Quoted from goldenboy232:I do have this one from one of the King Pins I restored.
Thanks for the offer. I really appreciate it. However, I'll need to pass on that one. The repair may not be seen from the players vantage point, but I'd rather not go with a repaired target.
I have 9 original targets, and one that looks like it's from a Gottlieb "Groovy", I like the design, but it just doesn't;t belong.
Quoted from Ritewing:All,
Does anyone have an old Night Rider EM sitting around?
I am looking for a backglass. If you could point me to one, I would be appreciative.
Thanks
Bob
[quoted image]
These guys have a new one for you: http://bgresto.com/?p=2497
Looking for an early 1970s Gottlieb coin mech lockout diverter wire. I'm not sure of the correct name, but it's the wire that moves in and out of the coin mech when the lock out coil turns on and off. The wire attaches to a horizontal bar that runs across the coin mech holders. Does anyone have a spare diverter wire or is there a source for one? Thanks!
diverter_wire (resized).jpgQuoted from fredsmythson:Looking for an early 1970s Gottlieb coin mech lockout diverter wire. I'm not sure of the correct name, but it's the wire that moves in and out of the coin mech when the lock out coil turns on and off. The wire attaches to a horizontal bar that runs across the coin mech holders. Does anyone have a spare diverter wire or is there a source for one? Thanks!
[quoted image]
I've got one, need any tiny c clips?
Quoted from pinhead52:I've got one, need any tiny c clips?
Thanks! Sending PM...
Quoted from aahgo:Looking for a playfield glass channel for a Williams Line Drive.
Plastic you can buy from pinball life. side channel i assume?
Quoted from pinhead52:Just picking up the slack from boilerman
you have far exceeded me... i hate doing the post office these days so i don't chime to much anymore when i see things on this thread
Quoted from boilerman:you have far exceeded me... i hate doing the post office these days so i don't chime to much anymore when i see things on this thread
I have a stack of flat rate small box usps express boxes, print labels off their web site and then just stick it in the mailbox. makes it easy. I hate going to the PO too. Now also have a stamps.com login as well
Quoted from pinhead52:I have a stack of flat rate small box usps express boxes, print labels off their web site and then just stick it in the mailbox. makes it easy. I hate going to the PO too. Now also have a stamps.com login as well
Try using Priority Regional Box A. They are available through USPS.com and are free. The shipping rate is very economical.
Quoted from pinhead52:Another ask, I need a coupler of plastic score reels to a Williams 1968 Pit Stop. Somebody cleaned a couple too good and took off the numbering.
pinhead52,
I don't have any, but there's a FB marketplace add for someone parting out a Williams Toledo:
https://www.facebook.com/marketplace/item/189058222542393
Would these reels fit your machine? Guy is a great seller, I bought the chime unit and got it in the mail within a few days.
Alberto
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-em-seeking-parts-thread/page/132?hl=jsf24 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Saint Paul, MN
North Adelaide
Newmarket, ON