Glenelg, MD
Looooong shot I know... searching for front door for 1947 United Mexico as shown below:
(Topic ID: 93586)
Linked Games
"300"
Gottlieb, 1975-
2001
Gottlieb, 1971
-
8 Ball
Williams, 1966
-
Abra Ca Dabra
Gottlieb, 1975
-
Amigo
Bally, 1974
-
Aquarius
Gottlieb, 1970
-
Atlantis
Gottlieb, 1975
-
Bank-A-Ball
Gottlieb, 1965
There are more than 8 games linked to this topic.
Click here to show all linked games
Click here to show all linked games
Topic Gallery
Quoted from edward472:Long shot, but does anyone have a loose handle for a Bally Skill Roll?
[quoted image]
I assume you mean a spare handle? Originals are difficult to come by. There are some 3D printed ones.
Quoted from jeffc:I assume you mean a spare handle? Originals are difficult to come by. There are some 3D printed ones.
Yep. I've seen the 3D printed ones. The issue is I have 7 of the 8 original handles. The 8th handle works but of course I'd like a original set of 8. I was hoping someone had one laying around.
Quoted from atpcfiaim:Here is a better photo.
Wow that is in fantastic shape. Thx, I still think it's the first time I've seen that pin and it looks like it would be fun to play.
Working on a Jacks Open and I'm missing the coinbox. Can anyone confirm this page regarding the style I should be looking for?
https://pinwiki.com/wiki/index.php?title=Coinbox/Cashbox_Identification_Guide#1975_.26_Later
Three holes in the top - evenly spaced?
657px-Gtb-em-coinbox-example-6 (resized).jpg
800px-Gtb-em-coinbox-18 (resized).jpg
Quoted from Drain1:Williams Hit and Run Baseball back glass needed. Help.
Try posting here and posting an ad in the Marketplace. If you’re not successful try ordering a repro from Bgresto. https://pinside.com/pinball/forum/topic/looking-for-backglass-and-translites-thread-buy-sell-trade/page/9#post-5700472
Sydney
Quoted from Beatnik-Filmstar:Working on a Jacks Open and I'm missing the coinbox. Can anyone confirm this page regarding the style I should be looking for?
https://pinwiki.com/wiki/index.php?title=Coinbox/Cashbox_Identification_Guide#1975_.26_Later
Three holes in the top - evenly spaced?
[quoted image]
[quoted image]
both will work. the holes are for each coin slot. that 1st box is the style you want, the 2nd one is from the 1960s.
Quoted from Beatnik-Filmstar:Working on a Jacks Open and I'm missing the coinbox. Can anyone confirm this page regarding the style I should be looking for?
https://pinwiki.com/wiki/index.php?title=Coinbox/Cashbox_Identification_Guide#1975_.26_Later
Three holes in the top - evenly spaced?
[quoted image]
[quoted image]
I have several coin boxes available, including that style. If interested, send me a private message.
Bristol
Does anyone have any used balls in the Bank a Ball backglass? Cost? I’m looking at a project that’s missing the 1, 2, 4, 5, 9, 14 and 15 balls. I know that I can get them from Pinball Resource, but $30.60 each seems high. Thanks
Quoted from bluespin:Does anyone have any used balls in the Bank a Ball backglass? Cost? I’m looking at a project that’s missing the 1, 2, 4, 5, 9, 14 and 15 balls. I know that I can get them from Pinball Resource, but $30.60 each seems high. Thanks
Seems? There was a whole head up for sale in the Boston area, dont know what happened to it. I bought a full set from PBR 2 years ago and he did give me a minor extra discount... 15% I believe. PBR is not stocking these anymore and case by case goes back to the individual to get them, can take 4-5 weeks.
Ken
I would like to point out that this thread over and over has helped me and other people asking for parts. I was skeptical about it when it was first launched. I thought it wouldn’t last week. Props to OP. I have helped many people without asking for more than the cost of shipping. Great thread, let’s keep it going.
Quoted from pinhead52:Seems? There was a whole head up for sale in the Boston area, dont know what happened to it. I bought a full set from PBR 2 years ago and he did give me a minor extra discount... 15% I believe. PBR is not stocking these anymore and case by case goes back to the individual to get them, can take 4-5 weeks.
Ken
Yup, that was me and it sold. It was a complete head with flaking glass.
Quoted from jbovenzi:Unfortunately, I do not have an extra mech to sell/trade etc. However, I just did get my machine back from a local expert that tuned it up!
My Ballygator is intact and is completely working. I would be happy to take any pictures that you need to help you out.
Please send me a PM so that I will be reminded to help.
Public thank you! to Jim, the pics really helped, and then I found this (Attention Ballygator folk!!) great video of the grabber set/reset mech.
Quoted from Raff:Triple action back glass needed.
Me too. I wish Shay or BgResto did this one.
Quoted from illawarra92:after one of the coin entrance plates circa 1950s [quoted image]
I think I have the chute but not the plate...
Heads up for those wanting a quick draw / fast draw reproduction Playfield
https://pinside.com/pinball/forum/topic/gottlieb-licensed-reproduction-fastquick-draw-playfields/page/3#post-5708959
Quoted from jeffc:Looking for a used GTB pop bumper body with red concentric circles like pictured below. Would rather not buy a new one so that I can match it to the other used bodies I’m keeping on the game.
Thanks. [quoted image]
2 bucks plus shipping
2020-06-25 22.13.02.jpgQuoted from pinhead52:2 bucks plus shipping[quoted image]
pinhead52 that looks great. I only need one. I sent you a PM. Thanks!
Quoted from DropTarget:Hi all,
I'm looking for a GTB coin door strike plate in decent shape
thx
why not a repro?
Quoted from DropTarget:Hi all,
I'm looking for a GTB coin door strike plate in decent shape
thx
I’ve probably got one laying around. Let me look later on today. If I do it’s yours for the cost of postage.
Quoted from boilerman:why not a repro?
I might but it's not going on a pristine game. And I'd prefer to use original parts if possible.
Quoted from Murphdom:I’ve probably got one laying around. Let me look later on today. If I do it’s yours for the cost of postage.
Thank you.
I'm going through and restoring a 1973 Bally Time Zone right now, these parts are being replaced. If anyone is interested there are 4 pop bumper caps (one of which is seriously yellowed), 25 1" white star posts, and 14 1-3/16" white star posts.
The star posts are discolored, but do not appear to be cracked or chipped.
Open to offers on a fair price and willing to ship. I'd prefer to sell everything together as a lot.
20200626_104707 (resized).jpgQuoted from undrdog:Still need lockdown bar or at least the end cap for the right side on Williams Heat Wave 1964, one player. (Parts catalog shows a different part number for one player games.)
[quoted image][quoted image]
Not cheap but original and exactly what you are looking for. Good thing you don't need the left side as they are out of stock.
https://www.flippers.com/catalog/product_info.php/right-metal-casting-p-5022
Quoted from MikeO:More
Not cheap but original and exactly what you are looking for. Good thing you don't need the left side as they are out of stock.
Thank you very much for finding it for me! Ordered & happy. Turned a rotten morning into a great afternoon.
Quoted from DropTarget:I might but it's not going on a pristine game. And I'd prefer to use original parts if possible.
i thought it was for dimension. for what game?
Quoted from undrdog:Thank you very much for finding it for me! Ordered & happy. Turned a rotten morning into a great afternoon.
You're welcome.
Quoted from boilerman:i thought it was for dimension. for what game?
It's for my Jungle King, which had a nice strike plate until I stole it for the Dimension.
Here's the dimension......
Man, I need to clean up before taking pictures!
IMG_5602 (resized).JPGQuoted from leckmeck:Does anybody have a good source for slotted washer-head screws that hold down the runway shield? One of these is really chewed up and it’d be a shame to use it on this game that’s getting a Wade Krause playfield.[quoted image]
i can probably spot you a couple. What length?
Quoted from Tonup69:For some reason the old style Gottlieb pop bumper bodies are out of stock everywhere. Does anyone have four decent ones they could sell me? They don't need to be new, but not cracked or too yellow from smoke.
[quoted image]
Steve Young @ Pinball Resource should have them?
Quoted from vec-tor:Steve Young @ Pinball Resource should have them?
I just ordered some from him a month or so ago.
Quoted from Tonup69:For some reason the old style Gottlieb pop bumper bodies are out of stock everywhere. Does anyone have four decent ones they could sell me? They don't need to be new, but not cracked or too yellow from smoke.
[quoted image]
best Ive got
pasted_image (resized).pngQuoted from Coyote:I just ordered some from him a month or so ago.
They have been out of stock for a month now. Not just PBR, but EVERYWHERE.
Promoted items from the Pinside Marketplace
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
