(Topic ID: 93586)

The EM seeking parts thread.

By Shapeshifter

9 years ago


Topic Heartbeat

Topic Stats

  • 10,305 posts
  • 865 Pinsiders participating
  • Latest reply 3 days ago by pinhead52
  • Topic is favorited by 239 Pinsiders

You

Linked Games

Topic Gallery

View topic image gallery

20240325_122857.jpg
20240325_105918 (resized).jpg
IMG_0448 (resized).jpeg
image (resized).jpg
image (resized).jpg
20240312_160646 (resized).jpg
IMG_2264 (resized).jpeg
Screenshot_20240309-185731~2 (resized).png
e5efab146512a32505bbf17802054f9e30ddaf86 (resized).jpg
pinside.3a7b2d029b01770456deb933b846a03cb0362a2c (resized).jpg
IMG_2808 (resized).jpeg
Gottlieb Coin Door 2-23-24 (resized).jpg
Gottlieb Coin Doors (resized).jpg
pasted_image (resized).png
PXL_20240220_032931688.MP (resized).jpg
PXL_20240220_032947351 (resized).jpg

There are 10,305 posts in this topic. You are on page 128 of 207.
#6351 3 years ago
Quoted from luch:

does this work ?
[quoted image]

I’m afraid not. This is what it looks like.

D3F7AC5F-AF18-4C07-BAD0-5DB2B7CE5C3B (resized).jpegD3F7AC5F-AF18-4C07-BAD0-5DB2B7CE5C3B (resized).jpeg
#6352 3 years ago
Quoted from dgAmpGuy:

I’m also looking for the Williams 30” red legs for a 59 wood rail. They don’t even have to be red
Thanks,
Dave

If you haven't found em, I might have 4... need to measure them, but they're original red, where do u live?

#6353 3 years ago
Quoted from EM-PINMAN:

Marcos Pinball
TRIP ARM LEVER LEFT - GOTTLIEB
#A-15883
Gottlieb 5 position drop target left trip arm lever assembly.
Reference:
15883
Weight: 1 lb
$18.00

Thanks. I'll check this out -- on their site the photo is not clear and I can't tell if this will work for an EM. Their reference number (A-15883) is different from Gottlieb's part number (B-13408) but I'll look. Thanks again!

#6354 3 years ago

Hi All,

I'm looking for the long left side plastic for a GTB 2001 / Dimension. Actually, I could use both sides as the left side is broken, and right side is warped, but useable.

thx.

#6355 3 years ago
Quoted from DropTarget:

right side is warped, but useable

Warped can be flattened. Here is my set up to accomplish it.

Sandwiched between two pieces of playfield glass for 45 minutes with a 60 watt incandescent bulb on each section for long plastics like on 2001. Let it cool in place for two hours clamped in place after turning lamp off.

IMG_9967 (resized).JPGIMG_9967 (resized).JPGIMG_9968 (resized).JPGIMG_9968 (resized).JPG
#6356 3 years ago
Quoted from DropTarget:

Hi All,
I'm looking for the long left side plastic for a GTB 2001 / Dimension. Actually, I could use both sides as the left side is broken, and right side is warped, but useable.
thx.

i have a nice for dimension but you know they are different for 2001

#6357 3 years ago
Quoted from boilerman:

i have a nice for dimension but you know they are different for 2001

PM sent

#6358 3 years ago

Thanks to Ken "Pinhead52" for selling me some of his NOS GTB playfield posts. They are really nice. I usually put new posts in my GTB games, I like the white ones from PBR, but really like these NOS ones.
thx again
izzy

#6359 3 years ago
Quoted from izzy:

Thanks to Ken "Pinhead52" for selling me some of his NOS GTB playfield posts. They are really nice. I usually put new posts in my GTB games, I like the white ones from PBR, but really like these NOS ones.
thx again
izzy

Thanks Izzy. Im ordering another batch. If anybody wants 100 or 200 let me know, the off white NOS posts on the right.

Parts - For Sale
New (selling multiple) - “I just got a shipment of NOS off white plastic posts, shown on the right, PBRs brilliant white on the left.. Im selling 100 at a crack, $50 plus $8 for small box shipping. Get th...”
2020-04-30
Colleyville, TX
108
Archived after: 6 days
Viewed: 475 times
Status: Sold (amount undisclosed)
Contributed to Pinside

posts (resized).jpgposts (resized).jpg

#6360 3 years ago

Hi,

Looking for a playfield for my SPACE WALK !

gottlieb-space-walk-em-pinball_1_fc832348ddc87c65de315b368679b1b3 (resized).jpggottlieb-space-walk-em-pinball_1_fc832348ddc87c65de315b368679b1b3 (resized).jpg

#6361 3 years ago
Quoted from kangourou:

Hi,
Looking for a playfield for my SPACE WALK !
[quoted image]

Have you seen this thread?

https://pinside.com/pinball/forum/topic/rescue-space-walk-playfield

F-2NIRO does wonders on very bad pfs

#6362 3 years ago
Quoted from goldenboy232:

Thanks. I'll check this out -- on their site the photo is not clear and I can't tell if this will work for an EM. Their reference number (A-15883) is different from Gottlieb's part number (B-13408) but I'll look. Thanks again!

Was able to source through Michigan Pinball.

#6363 3 years ago

Looking for King of Diamonds, back box relay bank card arms. Only need the arms for the 8,J & Q, but will consider a whole bank if need be. I know I can buy them blank from Steve and rivet them on, but figure I'd try here before I go that route.

image000000 (resized).jpgimage000000 (resized).jpg
#6364 3 years ago
Quoted from FlipperFix:

Looking for King of Diamonds, back box relay bank card arms. Only need the arms for the 8,J & Q, but will consider a whole bank if need be. I know I can buy them blank from Steve and rivet them on, but figure I'd try here before I go that route.
[quoted image]

Would these work? They’re pool ball animation arms from Bank-a-Ball.

5B80F273-DDF1-49B5-A677-64F68096F4F5 (resized).jpeg5B80F273-DDF1-49B5-A677-64F68096F4F5 (resized).jpegF04F78F2-F54A-460D-9B61-B23FA6034ED5 (resized).jpegF04F78F2-F54A-460D-9B61-B23FA6034ED5 (resized).jpeg
#6365 3 years ago

Ah just realized you’d still need to rivet.

#6366 3 years ago
Quoted from FlipperFix:

Looking for King of Diamonds, back box relay bank card arms. Only need the arms for the 8,J & Q, but will consider a whole bank if need be. I know I can buy them blank from Steve and rivet them on, but figure I'd try here before I go that route.
[quoted image]

I have a whole head but shipping is a killer

#6367 3 years ago
Quoted from pinhead52:

I have a whole head but shipping is a killer

Yeah it's a heavy sucker. Lol

#6368 3 years ago

looking to buy 1 gottlieb coin return as per photo

20200518_195117 (resized).jpg20200518_195117 (resized).jpg
#6369 3 years ago
Quoted from illawarra92:

looking to buy 1 gottlieb coin return as per photo[quoted image]

Ive got several of these. Shipping is an issue

#6370 3 years ago

I'm looking for 2 coin chutes for a Midway coin door off a 1973 Duck Hunt. Heres a pic of 1 thats on here but somehow it was busted by previous owner and is taped together. I picked up a new to me coin door but it didn't have those 2 coin chutes.

20200518_142617 (resized).jpg20200518_142617 (resized).jpg20200518_142349 (resized).jpg20200518_142349 (resized).jpg20200518_142423 (resized).jpg20200518_142423 (resized).jpg

#6371 3 years ago

Looking for a better looking card wheel for my 1959 Queen of Diamonds - or suggestions on how to make one.

IMG_2435 (resized).jpgIMG_2435 (resized).jpg
#6372 3 years ago
Quoted from pinhead52:

Ive got several of these. Shipping is an issue

if not too much trouble can pay for and send to pbr, then steve can send part with my next order (have done it before).

#6373 3 years ago
Quoted from illawarra92:

if not too much trouble can pay for and send to pbr, then steve can send part with my next order (have done it before).

i can do that if this one will work for you. kindda too shinny

2020-05-18 22.14.17.jpg2020-05-18 22.14.17.jpg

#6374 3 years ago
Quoted from Tonup69:

Looking for a better looking card wheel for my 1959 Queen of Diamonds - or suggestions on how to make one.
[quoted image]

You too!
I have asked the Pinball Rescue people to make the plastic part, but they do not seem interested...
I feel for you. Yours is better than the one I have... The one I have has turned into, more or less,
a potato chip.

#6375 3 years ago
Quoted from Tonup69:

Looking for a better looking card wheel for my 1959 Queen of Diamonds

If you are able to scan the one you have I would be glad to recreate one for you. Looking for accurate dimensions. PM me.

#6376 3 years ago
Quoted from pinhead52:

Have you seen this thread?
https://pinside.com/pinball/forum/topic/rescue-space-walk-playfield
f-2niro does wonders on very bad pfs

Hi
I know Franck Niro. He's French like me !
His work is a good quality but I prefer a NOS playfield rather than a playfield restored by him...

#6377 3 years ago

Looking for the wooden lockdown bar for a Bally beech queens ,maybe one for a bingo machine will work ,I was going to try to make one but was hoping someone out there had one ,here's some pics of one from a friend's machine

IMG_20200521_172440745 (resized).jpgIMG_20200521_172440745 (resized).jpgIMG_20200521_172451438 (resized).jpgIMG_20200521_172451438 (resized).jpgIMG_20200521_172454257 (resized).jpgIMG_20200521_172454257 (resized).jpg
#6378 3 years ago
Quoted from jdapolito:

Looking for the wooden lockdown bar for a Bally beech queens ,maybe one for a bingo machine will work ,I was going to try to make one but was hoping someone out there had one ,here's some pics of one from a friend's machine
[quoted image][quoted image][quoted image]

I have this lockdown bar 1961 era. One of the corners on the bar is cracked, but can be glued.
Looks like a match?
"[att=5663030,2000360 caption=""[att=5663030,2000360 caption="F6989839-81BA-4FC5-8ABA-F0D45BBB0C8F (resized).jpegF6989839-81BA-4FC5-8ABA-F0D45BBB0C8F (resized).jpeg962363F3-D8A9-4C46-AEB0-9C9B9DF508D2 (resized).jpeg962363F3-D8A9-4C46-AEB0-9C9B9DF508D2 (resized).jpegD5FF9FF0-FFFB-46DE-BF8E-805615AA61B2 (resized).jpegD5FF9FF0-FFFB-46DE-BF8E-805615AA61B2 (resized).jpeg

#6379 3 years ago

myrtlebeach.craigslist.org link

Not sure if this has been posted ..... Looks like this guy in California has a building of EM parts for sale.

#6380 3 years ago
Quoted from jasonp:

myrtlebeach.craigslist.org link
Not sure if this has been posted ..... Looks like this guy in California has a building of EM parts for sale.

This guy, has saved me a lot of headaches over the years.

#6381 3 years ago
Quoted from jasonp:

myrtlebeach.craigslist.org link
Not sure if this has been posted ..... Looks like this guy in California has a building of EM parts for sale.

He seems to flood Craigslist in every state in spurts. I have never found anything I needed from him and a lot of it has been very common parts.

#6382 3 years ago

Vic that looks like the right bar ,I sent you a message about the price and shipping thanks

#6383 3 years ago

Need a Williams 1960s (1964) lock down bar for Heat Wave, or, at least, the right hand cap.EB138B93-E69F-471A-B13E-03C818764482 (resized).jpegEB138B93-E69F-471A-B13E-03C818764482 (resized).jpeg

038FE70F-036C-4CD7-84F6-E2F2D8196FB0 (resized).jpeg038FE70F-036C-4CD7-84F6-E2F2D8196FB0 (resized).jpeg8C654D5D-4FD6-41EB-81D2-1EA865FD9563 (resized).jpeg8C654D5D-4FD6-41EB-81D2-1EA865FD9563 (resized).jpeg

#6384 3 years ago

Looking for a decent Sing Along playfield if anyone here has one kicking around

#6385 3 years ago

Hey guys,

I've had many shuffle alley and ball bowlers through here over the years and I just finished up the last one in my stock. Time to clear out all the extra parts as I don't plan on getting any more of these in the future.

Other than the photos attached, I do have several pin hoods that are near complete with parts as well. Let me know what you are looking for and lets make a deal to clear out some more space in my work shop!

I believe the frame and front coin box section are from an Aztec.

All of the play field lanes are near complete with wiring, switches, ect. and there are the proper rear puck stops that can be bolted on as well if needed. They have different connectors on them but I can easily move the correct set of switches and connectors to the correct lane that you are looking for. These can be shipped with a custom box that costs about $25 to be made and shipped to my place to pack and ship the lane out to you. You'd probably have to get a prepaid UPS shipping label and send it to me (45 lb weight and I can get you dimensions for the proper box as well. I do not know what the UPS shipping cost would be though.

Let me know what questions you have and what you are interested in and looking for.

I also have a couple boxes of parts from Rowe CD jukeboxes that can be sold off as well.

Thanks!

IMG_1767 (resized).JPGIMG_1767 (resized).JPGIMG_1768 (resized).JPGIMG_1768 (resized).JPGIMG_1769 (resized).JPGIMG_1769 (resized).JPGIMG_1770 (resized).JPGIMG_1770 (resized).JPGIMG_1771 (resized).JPGIMG_1771 (resized).JPG
#6386 3 years ago

Looking for silk screened repro of a Jacks Open if anyone has one. I know Ron Webb made them, not sure if Shay has. Nice original would of course also be great.

This is what I'm starting with:
IMG_6118 (resized).JPGIMG_6118 (resized).JPG
Standard flaking in reds that I'd like to improve upon.

Will write to BG Resto otherwise.

Added over 4 years ago:

EDIT - Replacement BG sourced already.

#6387 3 years ago
Quoted from Beatnik-Filmstar:

Will write to BG Resto otherwise.

Shay does not have them. bgresto does.

#6388 3 years ago
Quoted from undrdog:

Need a Williams 1960s (1964) lock down bar for Heat Wave, or, at least, the right hand cap.[quoted image]
[quoted image][quoted image]

Did you check with Steve at PBR?

#6389 3 years ago
Quoted from Silverstreak02:

Did you check with Steve at PBR?

Yes. No luck. Thanks for the suggestion.

#6390 3 years ago

Looking for a head and backglass for a Bally Freedom Pinball.

#6391 3 years ago

Back again. Taking the door to my Jacks Open apart for cleaning today. No idea in the world why this was done, but it looks like a few parts were welded together.
IMG_6178 (resized).JPGIMG_6178 (resized).JPG
The bracket on the left comes off, but the rod and three of the other parts are all welded together. The bracket on the right is free, so I suppose I could cut it out of there.

Don't see anything like these parts on PBR, and have no idea on part numbers to ask other than saying "ummm, the coin return bits"
If anyone knows part numbers for those so that I can ask Steve - that would be awesome.

Otherwise - if anyone has spare door parts from the larger Gottlieb EM door style that they're willing to sell - please let me know.

While I'm at it - general question. The inside of the door is filthy.
IMG_6180 (resized).JPGIMG_6180 (resized).JPG
This is the first larger sized Gottlieb door I've taken apart. Do these two pieces separate? It looks like they should based on the little tabs, but they're stuck together really good. Don't mind trying again but don't want to bother if they don't come apart in the first place.

#6392 3 years ago
Quoted from Silverstreak02:

Did you check with Steve at PBR?

Actually, I sent an email and someone other than Steve replied. Same thing, right?

#6393 3 years ago
Quoted from undrdog:

Actually, I sent an email and someone other than Steve replied. Same thing, right?

Yes. That’s probably Jimmy

#6394 3 years ago
Quoted from Beatnik-Filmstar:

Don't see anything like these parts on PBR, and have no idea on part numbers to ask other than saying "ummm, the coin return bits" If anyone knows part numbers for those so that I can ask Steve - that would be awesome.

Here is the relevant page from Gottlieb’s ’78 parts catalog.
IMG_6843 (resized).jpgIMG_6843 (resized).jpg

Quoted from Beatnik-Filmstar:

Do these two pieces separate? It looks like they should based on the little tabs, but they're stuck together really good.

They do. You might need some leverage after bending the tabs. There’s probably a lot of sugary soda residue stuck in there.

#6395 3 years ago
Quoted from leckmeck:

Here is the relevant page from Gottlieb’s ’78 parts catalog.
[quoted image]

They do. You might need some leverage after bending the tabs. There’s probably a lot of sugary soda residue stuck in there.

Thanks on both counts. Will ask Steve when I get around to ordering, and prepare for 40 years of dried up Orange Crush or whatever is holding that door together right now.

#6396 3 years ago
Quoted from Beatnik-Filmstar:

Thanks on both counts. Will ask Steve when I get around to ordering, and prepare for 40 years of dried up Orange Crush or whatever is holding that door together right now.

I have extra parts/extra door. two standoffs, bar and three levers or 2?

#6397 3 years ago
Quoted from Beatnik-Filmstar:

Thanks on both counts. Will ask Steve when I get around to ordering, and prepare for 40 years of dried up Orange Crush or whatever is holding that door together right now.

need anything else to the door?

2020-05-26 21.38.42.jpg2020-05-26 21.38.42.jpg
#6398 3 years ago

Need shooter rod bushing for Captain Fantastic.

#6399 3 years ago
Quoted from pinhead52:

need anything else to the door?
[quoted image]

Very cool - PM sent.

#6400 3 years ago
Quoted from AntennaMan:

Need shooter rod bushing for Captain Fantastic.

Try: Pinball Resource
BLY-C537-22 $3.56ea

Promoted items from the Pinside Marketplace
From: $ 90.00
Tools
Pincoder Store
Tools
$ 44.99
Cabinet - Shooter Rods
Pinball Shark
Shooter rods
$ 4.00
Playfield - Decals
UpKick Pinball
Decals
3,500
Machine - For Sale
Alpine, CALIFORNIA
There are 10,305 posts in this topic. You are on page 128 of 207.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/the-em-seeking-parts-thread/page/128 and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.