Looking for that elusive spinner/roulette wheel for the bottom playfield on a Gottlieb Super Score...
Looking for that elusive spinner/roulette wheel for the bottom playfield on a Gottlieb Super Score...
I have a 1971 Gottlieb Lawman in the queue for restoration. The cabinet flipper buttons were hacked somewhere during its lifetime.
I believe at this point in time Gottlieb was going through flipper button design transition (red anodized metal to metal to plastic)
So, I'm looking for the metal flipper buttons shown in the pic (GTB part # A11878). Also, the matching bushings (GTB part # C10939)'
Tried PBR, and they dont have.
thanks!
InkedDSCN0599_LI (resized).jpgQuoted from gameroomfan:I have a 1971 Gottlieb Lawman in the queue for restoration. The cabinet flipper buttons were hacked somewhere during its lifetime.
I believe at this point in time Gottlieb was going through flipper button design transition (red anodized metal to metal to plastic)
So, I'm looking for the metal flipper buttons shown in the pic (GTB part # A11878). Also, the matching bushings (GTB part # C10939)'
Tried PBR, and they dont have.
thanks!
[quoted image]
i think i have a set
Quoted from gameroomfan:I have a 1971 Gottlieb Lawman in the queue for restoration. The cabinet flipper buttons were hacked somewhere during its lifetime.
I believe at this point in time Gottlieb was going through flipper button design transition (red anodized metal to metal to plastic)
So, I'm looking for the metal flipper buttons shown in the pic (GTB part # A11878). Also, the matching bushings (GTB part # C10939)'
Tried PBR, and they dont have.
thanks!
[quoted image]
If Boilerman doesnt have it I have the buttons and bushings
Quoted from pinhead52:If Boilerman doesnt have it I have the buttons and bushings
ken you can get this one... i won't be able to dig them out for a few days
Quoted from gameroomfan:Thanks for the quick response, gentlemen. Much appreciated.
Pinhead52, I’ll PM you.
Alex
All i got.... NOS bushings, they'll just have to do.
Hey anybody sitting on a new set of Sky Jump plastics from Pinball Rescue they dont need right away? I need a set and the mails are messed up between Aus and the US right now. I could also use a lower left sling plastic for surfer/surf champ...
Hi again,
Does anyone have any corner blocks from a wedge head bottom cabinet? The ones that the leg-tee's attach to.
Worse comes to worse, I can make some, but would rather not.
TY
-W
Looking for a set of 31 inch Gottlieb legs. Please let me know if you have some laying around that you'd be willing to part with. Thank you.
Quoted from hawkeye11:Looking for a set of 31 inch Gottlieb legs. Please let me know if you have some laying around that you'd be willing to part with. Thank you.
PM sent.
Looking for the two flipper looking lane guides that are at the top of the playfield on a Central Park. I guess while I'm at it... also looking for the top ball arch with a good green manufacturer's certificate. They're usually so faded you can't read them anyway, so will likely work. Incidentally, the ball arch itself was damaged by a previous route operator. TIA
Quoted from MarkG:There are several pages that address Aladdin's Castle. Looking for anything in particular?
Thks Mark. I would just like to obtain the pages relevant to Aladdin's Castle so my 1976 manual is complete so far as AC is concerned as a follow up to my recent resto.
Quoted from Pinballprowess:Looking for the two flipper looking lane guides that are at the top of the playfield on a Central Park. I guess while I'm at it... also looking for the top ball arch with a good green manufacturer's certificate. They're usually so faded you can't read them anyway, so will likely work. Incidentally, the ball arch itself was damaged by a previous route operator. TIA
you can reprint the certs. pbr has the flipper lane guide
Quoted from pinhead52:you can reprint the certs. pbr has the flipper lane guide
[quoted image]
Thanks, pinhead 52... I just thought I could kill two birds with one stone because the arch was damaged, I still have some of those manufacture's certificates that leckmeck was kind enough to make for me on another game.
And as far as those lane guides from pbr... I bought a couple but didn't really care for them, they have some issues.
Quoted from Pinballprowess:Thanks, pinhead 52... I just thought I could kill two birds with one stone because the arch was damaged, I still have some of those manufacture's certificates that leckmeck was kind enough to make for me on another game.
And as far as those lane guides from pbr... I bought a couple but didn't really care for them, they have some issues.
Yea you can dremel out the divider, and use an led or 2 to get a better illumination. Anytime I find these original they are always brown etc.
Quoted from Playdium:Need a set of Williams 1960's red legs for a pitch and bat machine.
I’m also looking for the Williams 30” red legs for a 59 wood rail. They don’t even have to be red
Thanks,
Dave
I'm looking for this bracket that goes inside the cabinet of Bally 1973 and older canopy glass games. This bracket is mounted on the right side by the flipper button. It is part of a playfield support bracket that has a mating piece on the underside of the playfield.
Please PM me if you have something. I generally dont follow this thread closely.
Thanks in advance.
20200308_205513 (resized).jpg20200308_205529 (resized).jpgLooking for a coin switch mount for a Chicago Coin / Stern coin door. I have the switch itself, and I have the bracket for the coin mech, but I have none of the parts that mount the switch.
Basically looking to fill the gaps as shown in this photo.
-Hans
438C94F7-8B5F-438F-9A4B-4CAF20CF1D30 (resized).jpegQuoted from meSz:Anyone have a parts diagram for a 0-9 Unit circa 1961 Gottlieb?
http://www.pbresource.com/springkit/kt-gstep-02.jpg
This might help.
Thanks for the link. It’s a good start. I know there’s one with mor details I just can’t find it. If anyone has a detailed parts list for 0-9 Unit Gottlieb 1961 much appreciated
Quoted from SilverLiningMan:Looks like a nice stash for a Seattle area Pinsider:
seattle.craigslist.org link
Ding,ding,ding,ding.
Quoted from SilverLiningMan:Looks like a nice stash for a Seattle area Pinsider:
seattle.craigslist.org link
If anyone picks this up, I might be interested in the rifle stock
Quoted from meSz:Anyone have one of the armature stops for 0-9 Unit that would be willing to first class mail it to me? I have one that broke.
[quoted image]
Pinball Resource has that part.
Quoted from vec-tor:Pinball Resource has that part.
Thanks Vec.... where did you see it? I looked on the site and couldn't find it.
Probably have to look in the parts manual to find a part # and go from there. If you don't have a manual I'm sure someone can find that number for you.
Quoted from jeffc:This is from the 1976 GTB parts catalog:[quoted image]
Brilliant .... thanks Jeff!
Anyone have an extra one of these pin reset motor switches? The bottom leaf that has the riveted on piece that rides the wheel has broken off. The previous owners just bent the hell outta the switch to make it function. You can see in the pic the bottom leaf is broken off.
20200512_131127 (resized).jpgQuoted from PinDeLaPin:Anyone have an extra one of these pin reset motor switches? The bottom leaf that has the riveted on piece that rides the wheel has broken off. The previous owners just bent the hell outta the switch to make it function. You can see in the pic the bottom leaf is broken off.
[quoted image]
what manufacturer and game is that?
Quoted from PinDeLaPin:Anyone have an extra one of these pin reset motor switches? The bottom leaf that has the riveted on piece that rides the wheel has broken off. The previous owners just bent the hell outta the switch to make it function. You can see in the pic the bottom leaf is broken off.
[quoted image]
Maybe?
https://www.marcospecialties.com/pinball-parts/B-15001
Quoted from PinDeLaPin:Don't think that will work. Heres the one behind the broken one which is the same thing i'm looking for.
[quoted image]
Quoted from vec-tor:That is a Gottlieb cam "Brake" switch.
Quoted from PinDeLaPin:Don't think that will work. Heres the one behind the broken one which is the same thing i'm looking for.
[quoted image]
I think Williams em have the kind of "travel dog" you need...
I had a bowler that a guy redid the pin reset motor to, and he made
the motor turn backwards and broke the same kind of "travel dog" you have.
I’m looking for a coin box security brace for my Atlantis project. It’s the kind that Gottlieb put in their games between 1971 and 1975. It screws into the cross bar, stands upright, and the coin box is supposed to bolt onto it.
PBR doesn’t have them any more. Ken offered me one (pictured above) but it has arms, so it belongs to later games with the recessed coin door. Also, I’m looking for the silver-colored kind, not copper-colored. Those belong in older games.
It’s just for looks, but I want to get this detail right.
Quoted from leckmeck:I’m looking for a coin box security brace for my Atlantis project. It’s the kind that Gottlieb put in their games between 1971 and 1975. It screws into the cross bar, stands upright, and the coin box is supposed to bolt onto it.
PBR doesn’t have them any more. Ken offered me one (pictured above) but it has arms, so it belongs to later games with the recessed coin door. Also, I’m looking for the silver-colored kind, not copper-colored. Those belong in older games.
It’s just for looks, but I want to get this detail right.
and i need the brass version...
Quoted from leckmeck:I’m looking for a coin box security brace for my Atlantis project. It’s the kind that Gottlieb put in their games between 1971 and 1975. It screws into the cross bar, stands upright, and the coin box is supposed to bolt onto it.
PBR doesn’t have them any more. Ken offered me one (pictured above) but it has arms, so it belongs to later games with the recessed coin door. Also, I’m looking for the silver-colored kind, not copper-colored. Those belong in older games.
It’s just for looks, but I want to get this detail right.
does this work ?
DSC01043 (resized).JPGQuoted from goldenboy232:Looking for the reset arm for a five – target Gottlieb drop target bank, ideally with the plunger still attached to one end. This one has a broken edge where I’ve circled.
Marcos Pinball
TRIP ARM LEVER LEFT - GOTTLIEB
#A-15883
Gottlieb 5 position drop target left trip arm lever assembly.
Reference:
15883
Weight: 1 lb
$18.00
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-em-seeking-parts-thread/page/127?hl=jclocomotion and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.