The outhole kicker on my Atlantis project has terminal metal fatigue. Does PBR have a NOS supply for the twin-tip cam? If not, anybody have a good original they can sell me?IMG_6598 (resized).jpgIMG_4132 (resized).JPG
Quoted from edward472:do you have anymore of those skill roll decals?
I actually have. A while back someone said they'll take one. So that it would be more benefitcial to
my Graphic Designer, I had a couple made, then he canceled out, but I knew the 90 bucks wasn't
down the drain. Once applied, it looks exact to the original. I knew there would be others that could
use them.
I use to send out, then pay later, but all it took was one bad apple. 99.9% would be fine, and
not making anything is no problem, but loosing $45.00 kinda is, and actually more if factoring in
time/gas. Anyways, sorry, but I would need a check sent first. I'll send a PM with address and if
still interested, I'll package it this weekend..
Quoted from leckmeck:The outhole kicker on my Atlantis project has terminal metal fatigue. Does PBR have a NOS supply for the twin-tip cam? If not, anybody have a good original they can sell me?[quoted image][quoted image]
Give him a call. I just spoke with him today.
Quoted from leckmeck:The outhole kicker on my Atlantis project has terminal metal fatigue. Does PBR have a NOS supply for the twin-tip cam? If not, anybody have a good original they can sell me?[quoted image][quoted image]
low mileage
20200326_212109_resized (resized).jpgI have another quistion but asking for a older friend working on a spin a card. Im nit by the machine so i cant see what happen but he wired a new power cord and now has no lights. Anywhere. All fuses good cord done right. What could it be?
Quoted from smersh:I have another quistion but asking for a older friend working on a spin a card. Im nit by the machine so i cant see what happen but he wired a new power cord and now has no lights. Anywhere. All fuses good cord done right. What could it be?
not the right thread, start a new on in em tech, game name in tittle, get a copy of the cir diagram
Quoted from pinhead52:not the right thread, start a new on in em tech, game name in tittle, get a copy of the cir diagram
My bad pinsider em police. I will delete the quistion.
Quoted from pinhead52:not the right thread, start a new on in em tech, game name in tittle, get a copy of the cir diagram
Whoops.
Quoted from pinhead52:low mileage
Thanks, Ken. I’ll be in touch if PBR doesn’t have them.
If anyone is interested in these, I found a bag of old Bally scorecards — they seem to be from a four player billiards themed game based on the rules-set — in the bottom of a Gottlieb game that’s been awaiting restoration in my shop.
FREE if someone can use them!
Are the metal-ended ball shooter rods (A-6387, the one WITHOUT the 'pointed knob') really NLA?
I need at least one - can get it re-plated if necessary. MAY need a second, if it's the same size as used in early SS Sterns.
Edit to Add: Also looking for two large arrow inserts, as used on Jubilee. Colors don't matter - just want to plug the holes before putting the PF up on display.
Cleaning out some old parts as I finish emptying out the garage space I’m losing.
If anyone has a totally trashed Gottlieb door and wants a passable replacement some of these aren’t awful.
I’d say the biggest issue is the lip on the right side where, on most, you can tell someone tried to pry open. Could maybe be flattened.
Will sell any of them for $15 apiece plus shipping. PM if interested. Happy to send more detailed pics if there’s one you want to see more closely.
6397F292-540B-44E0-957D-5A4E84BF6DC0 (resized).jpeg326DD38A-E424-415B-91EB-E98C31731E80 (resized).jpeg1330AD95-9266-4FC4-BC77-2FF927697667 (resized).jpeg1D3F9A5D-8276-4AD1-BF6A-BC17302D3D63 (resized).jpeg9894F8CE-666F-4C50-A634-C4305A2D648A (resized).jpegE7116BD9-FF8B-4B9E-9E85-C28CCD8278C9 (resized).jpegCan someone post a picture of Bank-A-Ball main board & relay banks labels for me? Mine are all gone on my restore.
Edit: Got it thanks guys
Quoted from John_in_NC:Can someone post a picture of Bank-A-Ball main board & relay banks labels for me? Mine are all gone on my restore.
Edit: Got it thanks guys!! Labels on.
Made new labels for match and coin chute adjustments that are always grimy, sharing. Perfect match no, but it'll do
IMG_1549 (resized).JPG
Match feature sized (resized).jpg
Quoted from John_in_NC:Made new labels to replace the match and coin chute adjustments that are always grimy., sharing. Perfect match no, but it'll do
[quoted image]
[quoted image]
Looking for a slightly yellowed Gottlieb EM flipper bat that’s in good shape otherwise. Just don’t want bright white. But ideally scratch free if possible
Quoted from goldenboy232:Looking for a slightly yellowed Gottlieb EM flipper bat that’s in good shape otherwise. Just don’t want bright white. But ideally scratch free if possible
What size ... what game?
Quoted from goldenboy232:Looking for a slightly yellowed Gottlieb EM flipper bat that’s in good shape otherwise. Just don’t want bright white. But ideally scratch free if possible
Actually think I just found one locally, thanks guys.
Quoted from goldenboy232:Actually think I just found one locally, thanks guys.
did you get the assy. changed out after cutting off the shaft?
Quoted from pinhead52:did you get the assy. changed out after cutting off the shaft?
Yes, and it looks like it’s going to work well once I power the game back up. I just want to match the two shoes I have, and one of them is pretty scratched up.
Thanks Ken!
If anyone can use these, I just took them out of a Jacks Open that I’m restoring to sell.
I carefully cleaned all of them with Krud Kutter using a Q-tip, so they’re nice and clean, but there is some wear on the red and black ink.
It’s a complete set and I would sell it for $15 plus postage if someone could use it.
Way cheaper than buying a new set if you don’t care about them being perfect.
Mark
FA657474-E608-43E5-8848-34FFF00190E4 (resized).jpegAnyone have mushroom bumpers for sale, or attempt to 3d print them? My King Tut is missing both assemblies, just has the switches hanging under the playfield. I was able to order the red moving top from PBR, but they & Marco are out of the bodies. Photo isn't mine, it is from Marco Specialties site. Is the spring they use pretty special or finicky? Never had to take one apart.
pasted_image (resized).pngQuoted from emspence:Anyone have mushroom bumpers for sale, or attempt to 3d print them? My King Tut is missing both assemblies, just has the switches hanging under the playfield. I was able to order the red moving top from PBR, but they & Marco are out of the bodies. Photo isn't mine, it is from Marco Specialties site. Is the spring they use pretty special or finicky? Never had to take one apart.[quoted image]
Try to get a hold of Rick from Pinball USA in California...
I know he has scraped a Bally Flip Flop... He might be able to help.
Hey guys,
I've got 4 Genco Davy Crockett rifle gallery games to restore. I got the first one up and running 100% over the weekend. Waiting on a couple gun stocks for the others to arrive in the mail.
But, 2 of the 4 games are missing the coil that is used to create the gun recoil effect. It has a 05-2312 stock number, and J-501 reference number. It is a 110v coil.
I'm looking to purchase 2 of these to complete the final 2 Davy games. If you have any leads or suggestions please let me know.
Unfortunately, PBR does not have them or anything remotely equivalent.
I have an inquiry out to APB enterprises as well for a possible recreation of one of the 2 good coils that I have, but none of that has been discussed or confirmed yet.
I've come across several coil reference charts online and none of them have any Genco stuff cross referenced, just other manufacturers.
Here's to a good find! Putting all the feelers out on this one.....
Quoted from Pin-up:Hey guys,
I've got 4 Genco Davy Crockett rifle gallery games to restore. I got the first one up and running 100% over the weekend. Waiting on a couple gun stocks for the others to arrive in the mail.
But, 2 of the 4 games are missing the coil that is used to create the gun recoil effect. It has a 05-2312 stock number, and J-501 reference number. It is a 110v coil.
I'm looking to purchase 2 of these to complete the final 2 Davy games. If you have any leads or suggestions please let me know.
Unfortunately, PBR does not have them or anything remotely equivalent.
I have an inquiry out to APB enterprises as well for a possible recreation of one of the 2 good coils that I have, but none of that has been discussed or confirmed yet.
I've come across several coil reference charts online and none of them have any Genco stuff cross referenced, just other manufacturers.
Here's to a good find! Putting all the feelers out on this one.....
You might have to go to a custom coil manufacturer... I am surprised
that PBR did not have one or could not make you one.
Quoted from vec-tor:You might have to go to a custom coil manufacturer... I am surprised
that PBR did not have one or could not make you one.
I just got an e-mail reply from them today about not having one or an equivalent. Maybe it would end up being more of an in depth conversation on the phone about creating one, but I'll probably never call them again. E-mail is the way to go with them for me. They are a valuable parts resource.
ABP might be the way to go then. Hoping to hear back from them in the next couple days as well.
Quoted from Idahojerry:Looking for a couple of EM back glasses, both Williams. One is Skylab and the other is Full House.
bgresto has them....
Quoted from Pin-up:I just got an e-mail reply from them today about not having one or an equivalent. Maybe it would end up being more of an in depth conversation on the phone about creating one, but I'll probably never call them again. E-mail is the way to go with them for me. They are a valuable parts resource.
ABP might be the way to go then. Hoping to hear back from them in the next couple days as well.
Call and talk to Steve, he can custom make coils.
Quoted from pinhead52:Call and talk to Steve, he can custom make coils.
he could not me the recoil coil for me
I emailed pbr about a chicago coin coil. Site said they could substitute. They replied they had nothing for me.
I went to marco and a cross popped up. That cross is in stock at pbr.
I always go to pbr first but i do not think jimmy digs very deep. They go for (as i would) the low hanging fruit.
In the end i got a coil and other cc parts from Neil in NJ.
Any owners (Ljolitz rw68rsconv kdublu47 Brandie balzofsteel greeny ingmar jbes miami_pinball newhampshire tadpole17 Pinken @mrpinball420) of Gin out there willing to take pics of the upper playfield plastics for me? I've got some time on my hands in the coming weeks and feeling artsy. I'm missing the "1000 When Lit" center piece and the upper left plastic. I've seen rough pics but nothing I'd feel great about using as a template. Some pics should let me trace or print or paint by numbers on some new plastic. Also open to tips from anyone who has tried to remake plastics would help too. Many thanks!
IMG_20200328_202854970 (resized).jpgIMG_20200328_202642003 (resized).jpgDoes anyone know what the correct barrel is for a 1954 United Jungle Gun Deluxe and/or where I can find one. Got the game recently and it is missing the barrel.
Quoted from bwave_dave:Does anyone know what the correct barrel is for a 1954 United Jungle Gun Deluxe and/or where I can find one. Got the game recently and it is missing the barrel.
I have a United Carnival Gun that was released 4 months after Jungle Gun. It's in the same exact cabinet style. I sanded off the barrel on that one and it is confirmed to be a Remington Model 514. (photos below) I would think the Jungle gun would be the exact same thing with such a short time between releases. In looking at photos I've found online of the 2 games, they look to be identical to me.
I just did do a bunch of research and question asking and found out that a 56 Genco Davy Crockett, that I have 4 of, is also a Remington 514.
After looking into the 514, I've found that there were about 5 different variations of this gun. All of them are VERY similar and for the most part the pieces will fit together. But, you should be aware that there was a "boys" model as well, that had a shorter barrel to make it easier for the kids to handle and balance weight wise. Basically all the parts from all the 5 models are interchangeable though.
I did see something about 2 different barrel channel sizes that were made but I'm pretty sure the barrels on the gun games are all the standard "narrow" size and not the wide size, whatever that was used for.
Parts for the 514 are readily available on the net, either on eBay or at tons of gun sellers sites. I just purchased 3 of the 514 wooden stocks on eBay in the price range of $40-60 each. Obviously there is a little routing and drilling that you will have to do if you need a wooden stock and purchase one that was not already on an arcade game, but the metal barrel should be an easy mount with no alterations. Knowing what the guns are, it opens up for such an easy and cheaper purchase to fix these games with missing wooden stocks and parts as long as you're willing to make the factory correct alterations to fit the trigger switch stack under the bolt and mount it properly on the game mount. No more waiting for years for the right "arcade game gun" part to pop up somewhere. Fix that game now and enjoy it!
It looks like the metal barrels are mostly sold separate from the bolt, which you'll need both to complete the gun I'm guessing. There is also a small safety cone cap that is not always attached to the rear end of the bolt section that may need to be purchased separately as well. Some of the barrels come with sites already on them, and some don't, but there should be a site at each end of the barrel as well. There are several variations of the sites, so make sure you get the one with the correct screw hole placements to match whatever barrel you get, if it doesn't already have them attached.
Here is a blow up of all the parts for the 514: https://www.gunpartscorp.com/gun-manufacturer/remington/rifles-rem/514
Hope that all helps you out pretty good.
IMG_1721 (resized).JPGIMG_1722 (resized).JPGIMG_1720 (resized).JPGIMG_1719 (resized).JPGThe butt of the gun may also have the brand on it. The crossfire gun butt plate should say Marlin on it and my United Carnival says Remington on it as well.
Playmatic Speak Easy..... in need of the top arch plastic. Mine is badly warped, burned, and art is flaking off from heat. Never seen anything so bad before!
If you have one to part with please let me know!
For now, I'll just put a metal top arch in there.....
Quoted from pinhead52:Need a restorable Sky Jump pf. yes there is a WK pf in market, not willing to pay $1000
Define restorable.
Looking for two early 60’s Williams 50V score reel coils(DU-26-1350) and one early 60’s Williams 50V bell coil(A-2-26-1350) I prefer used original if possible. The bell coils have female connectors to make them quick disconnect. These are for a 3 Coins I’m working on.
See pictures.
08C454B5-928D-408E-917D-4B7E0B7FBB87 (resized).jpegA2073FEE-BC3E-44E7-BBDC-D0FF87BE5683 (resized).jpegWanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-em-seeking-parts-thread/page/123 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.