"300"
Gottlieb, 1975
2001
Gottlieb, 1971
8 Ball
Williams, 1966
Abra Ca Dabra
Gottlieb, 1975
Amigo
Bally, 1974
Aquarius
Gottlieb, 1970
Atlantis
Gottlieb, 1975
Bank-A-Ball
Gottlieb, 1965I am putting my target pool back together. Everything looks good except the metal back of the head. It looks like there ought to be some kind of channel or lip that it sits into at the bottom of the head to keep the bottom of the back from sliding out. I was thinking I could make something out of some kind of channel but if its a standard part I could probably just get one. Anyone know what it is and if its available?
Quoted from mark532011:I am putting my target pool back together. Everything looks good except the metal back of the head. It looks like there ought to be some kind of channel or lip that it sits into at the bottom of the head to keep the bottom of the back from sliding out. I was thinking I could make something out of some kind of channel but if its a standard part I could probably just get one. Anyone know what it is and if its available?
It uses a "metal channel strip". Pinball Resource sells them. Measure from side to side on the inside for length. 
Part# GTB-D8563-1 (this is the standard size, if you need a custom size they can make that as well)
$7.40 ea
Anyone want to trade schematics?
Need - Gottlieb Merry-Go-Round schematics
Offering Bally Bow and Arrow (Complete original documentation). Manual full size schematics, envelope.
Offering Gottlieb Street Fighter 2 manual
I know I can buy one from Steve or Marcos, but wondering if for any reason someone might have a cheap schematic and/or manual for a Gottlieb Jacks Open.
Quoted from pinhead52:ok gang throwing out a challenge...
The red arrow is pointing at the piece I need. It goes between the cast coin head on top of the game where the coin is inserted and the coin acceptor.
Bally Skill Roll uses the same part.[quoted image]
Could that be 3D printed?
Quoted from goldenboy232:Anyone have a set of Jack’s Open or Lucky Hand plastics?
PBR has them.
Quoted from goldenboy232:nyone have a set of Jack’s Open or Lucky Hand plastics
Pinball rescue hss them.
Raff
Quoted from EM-PINMAN:PBR has them.
Quoted from Raff:Pinball rescue hss them.
Raff
Thanks, yeah I also see that Marcos and Ebay have them too. I'll be picking up a set for this Jacks Open I got yesterday. BTW, will be selling it, along with the Top Card I just finished, the Spin Out I'm nearly done with, and a Big Hit -- all later this spring (Top Card and Spin Out essentially already for sale).
Hey I need... a retaining bracket from a late 70s gottlieb coin door. There is a 3 inch long piece that mounts from the coin mech frame to the end of the coin chute to hold the coin chute in alignment with the mech. Anybody that has a junk late 70s gottlieb square door probably has this.
(Ever see stainless polished to a mirror finish?)
thx
ken
20200313_201611_resized (resized).jpgmissing (resized).JPGKen what was your process on polishing that door?
Quoted from pinhead52:Hey I need... a retaining bracket from a late 70s gottlieb coin door. There is a 3 inch long piece that mounts from the coin mech frame to the end of the coin chute to hold the coin chute in alignment with the mech. Anybody that has a junk late 70s gottlieb square door probably has this.
(Ever see stainless polished to a mirror finish?)
thx
ken[quoted image][quoted image]
Quoted from pinhead52:Hey I need... a retaining bracket from a late 70s gottlieb coin door. There is a 3 inch long piece that mounts from the coin mech frame to the end of the coin chute to hold the coin chute in alignment with the mech. Anybody that has a junk late 70s gottlieb square door probably has this.
(Ever see stainless polished to a mirror finish?)
thx
ken[quoted image][quoted image]
That door is incredible.
Quoted from pinhead52:Hey I need... a retaining bracket from a late 70s gottlieb coin door. There is a 3 inch long piece that mounts from the coin mech frame to the end of the coin chute to hold the coin chute in alignment with the mech. Anybody that has a junk late 70s gottlieb square door probably has this.
(Ever see stainless polished to a mirror finish?)
thx
ken[quoted image][quoted image]
What game is seen in the reflection?
Quoted from Electrocute:What game is seen in the reflection?
Looks like Gottlieb Abra Ca Dabra.
Quoted from Electrocute:What game is seen in the reflection?
Side-by-side comparison is pretty compelling.
20200314_153055 (resized).jpg20200314_153319 (resized).jpgyes found his for sale ad https://pinside.com/pinball/forum/topic/for-sale-wizard-18
pasted_image (resized).pngQuoted from Electrocute:Far far right
My guess is Team One.
ARRRGHHHH Broke my (brand new replacement) 5 ball in the backglass on Bank-a-Ball. Anyone have a spare? Damn those repops are expensive.
Quoted from Electrocute:Far far right
How in the hell can you guys guess that one?
I don't have a clue, but since it looks a little bluish, I'll
say Surfer over Team One..
Maybe I'll polish up a door and start another one.
Quoted from Tyamry:That would be his Card Whiz.
it's in his pinside collection list !
Quoted from John_in_NC:Damn those repops are expensive.
How much are the re-pops?
No promises, but I might have something around.
I'll take a look tomorrow..
Quoted from Mopar:but since it looks a little bluish, I'll
say Surfer over Team One..
I was thinking green, but it just dawned on me. Team One has blue. I have both
machines, but it's been years since the Team One's been set up. I guess that makes
it a toss up..
Quoted from Mopar:How much are the re-pops?
No promises, but I might have something around.
I'll take a look tomorrow..
I think they're like $30 apiece
Quoted from Mopar:How much are the re-pops?
No promises, but I might have something around.
I'll take a look tomorrow..
I forget but more than I wanted to pay twice for the same ball. Hope I don't screw up the other 3 I'm installing.
Hey guys and gals, I’m looking for a set of Fast/Quick Draw plastics that are in “usable” condition-don’t have to be anything special. I’m just looking for parts to add some flair to my dartboard cabinet. Thanks.
D9EC5EEE-95B3-4123-9CDC-EA0573F81FB5 (resized).jpegE6AD2B7D-6E15-48A1-B554-EEE693CF1B61 (resized).jpegF637694E-ED2F-4364-8802-269CC768EC29 (resized).jpegQuoted from John_in_NC:Hope I don't screw up the other 3 I'm installing.
I'm sure you're aware, but you'll want to make sure the bank is reset before letting it down..
Quoted from Electrocute:What game is seen in the reflection?
You'd think its an Abra but its my Wizard (Team One retheme)
20191225_122621_resized (resized).jpgQuoted from goldenboy232:Ken what was your process on polishing that door?
there is a CA company that does this, but not practical cost wise
Quoted from Mopar:How in the hell can you guys guess that one?
I don't have a clue, but since it looks a little bluish, I'll
say Surfer over Team One..
Maybe I'll polish up a door and start another one.
neptune
Quoted from jasonspoint28:Hey guys and gals, I’m looking for a set of Fast/Quick Draw plastics that are in “usable” condition-don’t have to be anything special. I’m just looking for parts to add some flair to my dartboard cabinet. Thanks.[quoted image][quoted image][quoted image]
Wow, even the shadows inside the score reels look real. Very cleaver. I wish I could help you.
Quoted from jasonspoint28:Hey guys and gals, I’m looking for a set of Fast/Quick Draw plastics that are in “usable” condition-don’t have to be anything special. I’m just looking for parts to add some flair to my dartboard cabinet. Thanks.[quoted image][quoted image][quoted image]
That is awesome!
Quoted from gdonovan:That is awesome!
Thanks, it’s not quite finished yet. I’ve got a couple of ideas to dress it up a little.
Quoted from pinhead52:You'd think its an Abra but its my Wizard (Team One retheme)
Is that a true wow machine with 5 Wows in the backglass with the extra stepper in the back box?
What year is Wizard, 1971?
Quoted from Mopar:Is that a true wow machine with 5 Wows in the backglass with the extra stepper in the back box?
What year is Wizard, 1971?
Wizard appears to have been an Italian prototype game that was never produced. Luckily they did the prototypes.
Yes, the 5 Wows in the head/backglass.
Yes, 1971.
Quoted from jasonspoint28:Hey guys and gals, I’m looking for a set of Fast/Quick Draw plastics that are in “usable” condition-don’t have to be anything special. I’m just looking for parts to add some flair to my dartboard cabinet. Thanks.[quoted image][quoted image][quoted image]
That is too cool.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-em-seeking-parts-thread/page/121 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Chapel Hill, NC
North Adelaide
Newmarket, ON