Quoted from pinhead52:Im restoring a Space Walk and I need some light tubes, a couple of 1 1/2 in outside dia tubes and qty 4 1 1/8 tubes.
Thanks. Using a Card Whiz as a doner for this game, if anybody needs something from the game let me know.
Ken[quoted image]
Home Depot had couplings with a od very close
Quoted from pinhead52:Im restoring a Space Walk and I need some light tubes, a couple of 1 1/2 in outside dia tubes and qty 4 1 1/8 tubes.
Thanks. Using a Card Whiz as a doner for this game, if anybody needs something from the game let me know.
Ken[quoted image]
Couldnt find any pvc to match BUT pvc couplings were a pretty close match.
20191124_110014_resized (resized).jpg20191124_110021_resized (resized).jpgQuoted from Spyderturbo007:Just wanted to post this again. I'm still looking for A-2858. Thanks
It's for my Safari.
[quoted image]
Did you inquirer over at pinball resource?
Quoted from Spyderturbo007:Just wanted to post this again. I'm still looking for A-2858. Thanks
It's for my Safari.
[quoted image]
I'll check. I have some Bally steppers.
Quoted from vec-tor:Did you inquirer over at pinball resource?
I did. They don’t have them.
Quoted from Playdium:I'll check. I have some Bally steppers.
Sorry, don't have that one.
I have an older Bally credit reel, close enough to adapt perhaps? I think they used a common frame. Take a picture when I get home if you like.
Contact Curtis Johnson. He is on here and has a boat load of parts. Sorry, he isn't active on this site. I'll contact him for you.
Quoted from Playdium:Contact Curtis Johnson. He is on here and has a boat load of parts.
What’s his username?
Anybody have some early 60’s Williams pinball lockdown bar end caps? Currently working on reviving a Double Barrel and mine are missing.
May consider “junk” ones if anyone has them just to get dimensions- maybe I could have some made out of aluminum or stainless?
Quoted from Gadget:Anybody have some early 60’s Williams pinball lockdown bar end caps? Currently working on reviving a Double Barrel and mine are missing.
May consider “junk” ones if anyone has them just to get dimensions- maybe I could have some made out of aluminum or stainless?
It might be a tough find. From what I have gathered a lot of them are pretty junky so if you want a nice set you’ll have to get them plated if you find a set. I plan on sending mine out but I just haven’t gotten around to it yet. The same wear issue happens on the Gottlieb machines with the end caps but at least you can buy reproduction parts at PBR for them.
I'm looking for one drop target from Gottlieb Out of Sight/Far Out. Black and yellow checkerboard pattern. Also looking for the two small oval-shaped plastics at the sides, but not as optimistic I'll find those.
Quoted from CaffeineSlug:I'm looking for one drop target from Gottlieb Out of Sight/Far Out. Black and yellow checkerboard pattern. Also looking for the two small oval-shaped plastics at the sides, but not as optimistic I'll find those.
You could scan one of the drop targets you have and make a decal and add it to a yellow blank. Or if you’re careful enough you can hand paint it. Only you are going to notice it’s there.
Quoted from CaffeineSlug:I'm looking for one drop target from Gottlieb Out of Sight/Far Out. Black and yellow checkerboard pattern. Also looking for the two small oval-shaped plastics at the sides, but not as optimistic I'll find those.
Ive got some savaged drop targets and should have the plastics, let me dig it out
Quoted from pinhead52:Ive got some savaged drop targets and should have the plastics, let me dig it out
I take that back, I had the Far Out plastics recreated but forgot to do these two, will need them. do have the drop targets
Quoted from BallyCrazy:For my Mad World Bally, I'm looking for all circled playfield parts in good shape to replace mine that are all rusty.
[quoted image]
Pinball Resource has some of those. I’m fairly confident he ships internationally. If he doesn’t let me know and I can order it and forward it to you. The gate with the hood is here:
ebay.com link: 0
Have a williams chime unit (Grand Prix) that broke one of the retaining tabs, seems the direction is to replace with a Gottlieb/Bally. If anyone has a Williams or a good alternative replacement, please ping me.
Quoted from JONESDS:Have a williams chime unit (Grand Prix) that broke one of the retaining tabs, seems the direction is to replace with a Gottlieb/Bally. If anyone has a Williams or a good alternative replacement, please ping me.
I have a Bally chine unit available
Quoted from JONESDS:Have a williams chime unit (Grand Prix) that broke one of the retaining tabs, seems the direction is to replace with a Gottlieb/Bally. If anyone has a Williams or a good alternative replacement, please ping me.
I went through the same problem... I found a really good machinist/metal fabricator
that made new tabs and welded them on to the old bracket.
I was able to save six Williams' chime units from the trash bin.
If you don't mined the hassle, try and seek out a good metal fabricator:
in order to save the unit.
Quoted from JONESDS:Have a williams chime unit (Grand Prix) that broke one of the retaining tabs
This is the trick I came up with to get my chime ringing true again - no welding required.
Quoted from atpcfiaim:Hello everyone. Still looking for a ‘77 Williams Rancho set of slingshot plastics. Thanks.
Hey will you post some pics of the PF on that Rancho? I'm not sure I've seen that one and it looks pretty cool from what I could see.
Quoted from atpcfiaim:Hello everyone. Still looking for a ‘77 Williams Rancho set of slingshot plastics. Thanks.[quoted image]
Is that the metal cabinet? Is the head metal also? What does that weigh?
Quoted from JONESDS:Have a williams chime unit (Grand Prix) that broke one of the retaining tabs, seems the direction is to replace with a Gottlieb/Bally. If anyone has a Williams or a good alternative replacement, please ping me.
I have a Gottlieb chime unit available
16 gottlieb score reels available
1 gottlieb coin door with frame and wiring harness
random gottlieb parts - shoot me PM
Quoted from BallyCrazy:For my Mad World Bally, I'm looking for all circled playfield parts in good shape to replace mine that are all rusty.
[quoted image]
Those will polish up. Try Maguire's mag & aluminum polish.
I am trying to find a red joker smiley face play field cover for my 1976 Royal Flush. It is the part that covers the light from below and has a smiley face on the red lens. It is located in the top right of the play field. If anyone has a Royal Flush that they are using for parts I am willing to buy the part.
Hello Pinside EM folks. Been away awhile from Pinside awhile. Got the itch again and went crazy (for me) this past weekend. Picked up a Cleopatra SS project and a Fast Draw. It's my second EM. The longer I'm in the hobby, the more I feel drawn to EMs. Anyhow, the Fast Draw is missing a lock bar. How hard are these to track down? Sourcing EM parts is a new world for me. I've already checked PBR. TIA.
Quoted from vaevictis:Hello Pinside EM folks. Been away awhile from Pinside awhile. Got the itch again and went crazy (for me) this past weekend. Picked up a Cleopatra SS project and a Fast Draw. It's my second EM. The longer I'm in the hobby, the more I feel drawn to EMs. Anyhow, the Fast Draw is missing a lock bar. How hard are these to track down? Sourcing EM parts is a new world for me. I've already checked PBR. TIA.
Pretty tough to find the button style these days. Street price 120-150. If I see a machine for $200 I buy it for the bar...
i do have a fin style plus receiver at a reasonable price if you want to do a conversion.
Quoted from Gotemwill:I am looking for original score/instruction cards for a 1966 Chicago Coin Hula Hula.
If you have a beat up one send it to Inkochnito. He is always looking for them. He will redo it. Then I would suggest pulling the blank pages out of the front or the back of an old book to print on if you are looking for the aged look.
Has anyone found a source for card stock that is similar to aged originals?
Obviously I would still like to find originals.
Quoted from Gotemwill:Has anyone found a source for card stock that is similar to aged originals?
Obviously I would still like to find originals.
I use Canson Mi-Teintes art paper, pale yellow
https://www.amazon.com/Mi-Teintes-Paper-19-5X25-5-Pale-Yellow/dp/B004BN9QN4
Quoted from pinhead52:Couldnt find any pvc to match BUT pvc couplings were a pretty close match.[quoted image][quoted image]
This is a core from a box of aluminum foil. A "C" cell just fits inside as a gauge of size. I don't know if this would be suitable for your application, if cut into the proper lengths.
20191218_153457 (resized).jpg20191218_153542 (resized).jpg20191218_153523 (resized).jpgQuoted from jrpinball:This is a core from a box of aluminum foil. A "C" cell just fits inside as a gauge of size. I don't know if this would be suitable for your application, if cut into the proper lengths.[quoted image][quoted image][quoted image]
I have found small diameter postal tubes will also do the trick
Quoted from goldenboy232:Looking for a Lockdown Bar (GTB-D14008A) for a 1973 Gottlieb King Pin. Just realized the one that came with the game I bought last weekend is the wrong lock-bar for that game.
Looks like PBR is out of stock of these.
I too am looking for one of these
Parting out much of a Gottlieb Sure Shot’s internals. Not selling top side playfield parts or cabinet parts but most of the internals of the head, the bottom panel and underside playfield parts. Relay banks, steppers, other mechs available. Let me know what you may need or take it all!
Quoted from Frantickoala:I too am looking for one of these
Yeah. They're getting tough to get. According to Steve at PBR, he can no longer get them reproduced.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-em-seeking-parts-thread/page/115?hl=gotemwill and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.