Shaker Heights, OH
I am looking for a plastics set and a backglass for gottlieb fun land.
(Topic ID: 93586)
Linked Games
"300"
Gottlieb, 1975-
2001
Gottlieb, 1971
-
8 Ball
Williams, 1966
-
Abra Ca Dabra
Gottlieb, 1975
-
Amigo
Bally, 1974
-
Aquarius
Gottlieb, 1970
-
Atlantis
Gottlieb, 1975
-
Bank-A-Ball
Gottlieb, 1965
There are more than 8 games linked to this topic.
Click here to show all linked games
Click here to show all linked games
Topic Gallery
ISO:
Bally Skill Roll nickel coin entry
Top wood trim off the front (measurements, wood and stain (I heard cherry) would help for recreating otherwise)
Quoted from Drussksu:I am looking for a plastics set and a backglass for gottlieb fun land.
Do you need the complete set of plastics or just one piece? I have a complete set with only one (Last time that I checked) broken piece. I have both parts. No back glass.
Quoted from Drussksu:I am looking for a plastics set and a backglass for gottlieb fun land.
i have a really nice original bg if you want some pic let me know
I have a pair of 27" chrome legs that have a single rib. they are in good shape, acid dip and a little elbow grease they could look good. Problem is Im in Florida. We are probably going to be taking a few days off here shortly due to a cane but I do have the pair if that helps. I have NO idea where I got them but you know how it is, parts just kinda appear sometimes.
if interested let me know!
I just listed a bunch of EM populated playfields....plenty of parts: https://pinside.com/pinball/market/classifieds/ad/84156
Most are $60 or two for $100.
Quoted from Dono:The Jones plugs are for a Mata Hari EM 1976
Ah, wonderful Bally Jones Plugs, a little corrosion here, and a little corrosion there, then snap. 
Quoted from EM-PINMAN:Ah, wonderful Bally Jones Plugs, a little corrosion here, and a little corrosion there, then snap.
Actually it’s user error... I was putting the playfield on my rotisserie and my hands slipped off one side of the PF... one end of the landed on two Jones plugs and put an end to them in an instant.
Quoted from Dono:Actually it’s user error... I was putting the playfield on my rotisserie and my hands slipped off one side of the PF... one end of the landed on two Jones plugs and put an end to them in an instant.
Wow! 
Hopefully you find those Jones Plugs soon.
I did by the way get the Multiplier Unit to work on my MH. That 2x, 3x, & 5x bonus relays are a royal pita. 4 times into them finally got it to hold. They are harder to set the M/B switches than a AX, BX, and Game Over Relay on a Gottlieb. My advice is that if they are working fine leave them alone. 
Recently moved around a flipperless machine and went to set it down and heard a crunch....wiring had fell out bottom and I broke jones in half
SucksI!
Quoted from Dono:Need 2 male Bally Jones plugs, a 20 pin and 22 pin... larger ones are fine as I can cut to fit.
Thanks!!!
Don O
I have a 20 pin plug that has your name on it. Tell me what a fair price is for you and it will be in the mail.
IMG_3098 (resized).JPGQuoted from Pin-Pilot:I have a 20 pin plug that has your name on it. Tell me what a fair price is for you and it will be in the mail.[quoted image]
Pin Pilot is good people.
Quoted from edward472:Pin Pilot is good people.
Just happy to help.
How did that cloth wire work out for you?
Quoted from Pin-Pilot:Just happy to help.
How did that cloth wire work out for you?
Awesomely. Thanks again
Quoted from Dono:Need 2 male Bally Jones plugs, a 20 pin and 22 pin... larger ones are fine as I can cut to fit.
Thanks!!!
Don O
I've got these. They are old and it looks like one came from a bingo. They are what they are. The end of the 20 pin plug is chewed up a bit but should work. I don't know what they are worth. I will polish them up for you if you are interested in them.
DSCF4438 (resized).JPGQuoted from Dono:Need 2 male Bally Jones plugs, a 20 pin and 22 pin... larger ones are fine as I can cut to fit.
Thanks!!!
Don O
I've got a 22 pin plug. From a William's but should work.
Shoot me your address and it's yours.
Quoted from 1974DeltaQueen:Looking for the clips on an early 70’s Bally that hold the rollover button. Anyone know what size they are ? Here is the top side and then a pic of what they look like .[quoted image][quoted image]
They are called push nuts- here is a link to verify what you are talking about, but these are a bit bigger than what you are talking about
https://www.pinballlife.com/14-push-nut.html
Quoted from John_In_WI:I've got a 22 pin plug. From a William's but should work.
Shoot me your address and it's yours.
Thanks for the offer, I found what I needed!!!
Quoted from Ant16bar2:Looking for Base Hit Williams machine for parts
Are they title specific parts you are looking for? If they aren’t Williams made a few P & B’s within that time period that are very similar and could easily be traded out.
Quoted from Wmsfan-GAP:They are called push nuts- here is a link to verify what you are talking about, but these are a bit bigger than what you are talking about
https://www.pinballlife.com/14-push-nut.html
Thx I figured out what they were called I was looking for a size. I
Might have to mic up the stem to be sure
X
Added over 5 years ago:Measured with a micrometer the push nut needs to fit over a shaft that is .110 inches or 7/64”
Quoted from pinhead52:Does anybody have any Bally 70's kickers? Marco is out of stock[quoted image]
I just purchased the last two "heads" from PBR last month. Someone did mention there was a metal arm assembly that can be substituted.
Quoted from pinhead52:Does anybody have any Bally 70's kickers? Marco is out of stock[quoted image]
I just took a kicker off an SI....looks similar, but dont have it in front of me. Are they the same? Also have a bally Night rider SS . Dont know if they kept the same kicker.
Quoted from pinhead52:Does anybody have any Bally 70's kickers? Marco is out of stock
Everyone is out, Flippers, Gameroom guys, action pinball 
Quoted from robertmee:I just took a kicker off an SI....looks similar, but dont have it in front of me. Are they the same? Also have a bally Night rider SS . Dont know if they kept the same kicker.
I can confirm Night Rider EM and Star Trek are the same
Quoted from JethroP:Looking for the nylon wheel for my Bonus Unit. It is for a Bally Freedom.
ebay.com link: Lot of Four Bally Stepper Units pinball parts pinball machines
maybe here?
Quoted from robertmee:I checked my Night Rider playfield I have for sale..have two complete kickers and they look the same as the picture.
pm sent, thanks
I need qty 3 bally pop bumper mounting plates, the strip that the top side pop bumper mounts to. Restoring an EK and this pf used a later style then my original.
looks like a 3 inch long by 3/4 inch wide strip, big hole in the center then threaded holes for the pop and then two mounting screw holes.
DSC04579 (resized).JPGpasted_image (resized).png
Nantes
Quoted from pinhead52:I need qty 3 bally pop bumper mounting plates, the strip that the top side pop bumper mounts to. Restoring an EK and this pf used a later style then my original.
looks like a 3 inch long by 3/4 inch wide strip, big hole in the center then threaded holes for the pop and then two mounting screw holes.[quoted image][quoted image]
Is this what you need?
20190905_120025 (resized).jpgQuoted from robertmee:Is this what you need?[quoted image]
thats it. I just made an arrangement for a couple of these from Pinball Preservation. I'll let you know if they dont show up. (Shoudda hit you up)
Quoted from BallyCrazy:Hi Ken,
I don’t have this part you've circled in red mounted on none of my 2 EK EM :
[quoted image]
And no trace that the two screws were ever been screwed on the playfield (no holes at all in this area).
this ek pf seems to have extra holes, may be a solid state one, hopefully no other surprises
20190904_124904_resized (resized).jpgQuoted from newmantjn:ebay.com link » Lot Of Four Bally Stepper Units Pinball Parts Pinball Machines
maybe here?
Thanks, but I did a repair on my broken wheel (ratchet) with J-B Weld and it is holding up great. Here is a link to the repair I did.
https://pinside.com/pinball/forum/topic/nylon-ratchet-wheel-repair-on-bonus-unit
Quoted from edward472:PM Sent
Also looking for an odd size switch. This is 2 switch leafs stacked on top of each other. 1 leaf is 1 1/4" and 1 is 1 9/16"
[quoted image][quoted image][quoted image]
Found. too-many-pins you are the man!
Quoted from edward472:but I know that's a super long shot.[quoted image]
No pun intended.
Quoted from pinhead52:this ek pf seems to have extra holes, may be a solid state one
Ding, Ding... Solid State playfields are cut different than the E.M. version.
CPR playfields drilled through the playfield for the S.S. pop bumper body bracket...
They should have just put dimple marks on the backside of the playfield.
Quoted from edward472:Look for a loose EM Midway gun game stock. Don't need the hardware just the stock. Would like one from a Midway Rifle Gallery, but I know that's a super long shot.[quoted image]
I'm sure you know this, but just in case. They used actual guns for many, perhaps all, of those games. Therefore, you might have better luck looking for a stock to the gun that was on that game as opposed to looking for a stock for the game, if that makes sense. If I recollect correctly, the stock on the Midway Capt'n Kidd I had was from an old Winchester 22...I'll see if I wrote down the model somewhere.
Promoted items from Pinside Marketplace and Pinside Shops!
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
