(Topic ID: 93586)

The EM seeking parts thread.


By Shapeshifter

5 years ago



Topic Stats

  • 5,604 posts
  • 529 Pinsiders participating
  • Latest reply 31 minutes ago by weeze
  • Topic is favorited by 134 Pinsiders

You

Linked Games

Topic Gallery

There have been 1,679 images uploaded to this topic. (View topic image gallery).

images.jpeg-6 (resized).jpg
pasted_image (resized).png
pasted_image (resized).png
20191015_215904 (resized).jpg
DSCN6478 (resized).JPG
DSCN6479 (resized).JPG
A968E1F3-818B-4966-985E-8BC475E05B28 (resized).jpeg
CB5406D4-102A-424E-B7FA-CBC29DC099DB (resized).jpeg
FDA38128-E9BC-42E3-AF96-F9D1CED3DBDC (resized).jpeg
DSCN2169 (resized).JPG
P1170275 (resized).JPG
thumbnail_IMG_8241 (resized).jpg
thumbnail_IMG_8244 (resized).jpg
1 (resized).jpg
20191009_090141 (resized).jpg
IMG_3335 (resized).JPG

There are 5604 posts in this topic. You are on page 109 of 113.
#5401 53 days ago

I am looking for a plastics set and a backglass for gottlieb fun land.

#5402 53 days ago

ISO:
Bally Skill Roll nickel coin entry
Top wood trim off the front (measurements, wood and stain (I heard cherry) would help for recreating otherwise)

#5403 53 days ago
Quoted from Drussksu:

I am looking for a plastics set and a backglass for gottlieb fun land.

Do you need the complete set of plastics or just one piece? I have a complete set with only one (Last time that I checked) broken piece. I have both parts. No back glass.

#5404 53 days ago

Yes I need the whole set. Let me know what you want for them. Dan

#5405 53 days ago
Quoted from Drussksu:

I am looking for a plastics set and a backglass for gottlieb fun land.

i have a really nice original bg if you want some pic let me know

#5406 52 days ago

I am searching for a Gottlieb lockdown bar for my king rock. Anyone have any for sale cheap?

#5407 52 days ago

I have a pair of 27" chrome legs that have a single rib. they are in good shape, acid dip and a little elbow grease they could look good. Problem is Im in Florida. We are probably going to be taking a few days off here shortly due to a cane but I do have the pair if that helps. I have NO idea where I got them but you know how it is, parts just kinda appear sometimes.
if interested let me know!

#5408 51 days ago

I just listed a bunch of EM populated playfields....plenty of parts: https://pinside.com/pinball/market/classifieds/ad/84156

Most are $60 or two for $100.

#5409 51 days ago

Need 2 male Bally Jones plugs, a 20 pin and 22 pin... larger ones are fine as I can cut to fit.

Thanks!!!

Don O

#5410 50 days ago

The Jones plugs are for a Mata Hari EM 1976

#5411 50 days ago
Quoted from Dono:

The Jones plugs are for a Mata Hari EM 1976

Ah, wonderful Bally Jones Plugs, a little corrosion here, and a little corrosion there, then snap.

#5412 50 days ago
Quoted from EM-PINMAN:

Ah, wonderful Bally Jones Plugs, a little corrosion here, and a little corrosion there, then snap.

Actually it’s user error... I was putting the playfield on my rotisserie and my hands slipped off one side of the PF... one end of the landed on two Jones plugs and put an end to them in an instant.

#5413 50 days ago

Easy fix, just give the machine to me

#5414 50 days ago
Quoted from Dono:

Actually it’s user error... I was putting the playfield on my rotisserie and my hands slipped off one side of the PF... one end of the landed on two Jones plugs and put an end to them in an instant.

Wow!

Hopefully you find those Jones Plugs soon.

I did by the way get the Multiplier Unit to work on my MH. That 2x, 3x, & 5x bonus relays are a royal pita. 4 times into them finally got it to hold. They are harder to set the M/B switches than a AX, BX, and Game Over Relay on a Gottlieb. My advice is that if they are working fine leave them alone.

#5415 50 days ago

Any chance of gluing together for now?

#5416 50 days ago

Recently moved around a flipperless machine and went to set it down and heard a crunch....wiring had fell out bottom and I broke jones in half

SucksI!

#5417 50 days ago

Looking for the clips on an early 70’s Bally that hold the rollover button. Anyone know what size they are ? Here is the top side and then a pic of what they look like .

587CC103-9475-4506-BBD0-0425139B0C3D (resized).pngB0583C6B-07B9-4AAA-909E-8A5E940678DC (resized).jpeg
#5418 50 days ago
Quoted from Dono:

Need 2 male Bally Jones plugs, a 20 pin and 22 pin... larger ones are fine as I can cut to fit.
Thanks!!!
Don O

I have a 20 pin plug that has your name on it. Tell me what a fair price is for you and it will be in the mail.

IMG_3098 (resized).JPG
#5419 50 days ago
Quoted from Pin-Pilot:

I have a 20 pin plug that has your name on it. Tell me what a fair price is for you and it will be in the mail.[quoted image]

Pin Pilot is good people.

#5420 50 days ago
Quoted from edward472:

Pin Pilot is good people.

Just happy to help.

How did that cloth wire work out for you?

#5421 50 days ago
Quoted from Pin-Pilot:

Just happy to help.
How did that cloth wire work out for you?

Awesomely. Thanks again

#5422 50 days ago
Quoted from Dono:

Need 2 male Bally Jones plugs, a 20 pin and 22 pin... larger ones are fine as I can cut to fit.

Thanks!!!

Don O

I've got these. They are old and it looks like one came from a bingo. They are what they are. The end of the 20 pin plug is chewed up a bit but should work. I don't know what they are worth. I will polish them up for you if you are interested in them.

DSCF4438 (resized).JPG
#5423 50 days ago
Quoted from Dono:

Need 2 male Bally Jones plugs, a 20 pin and 22 pin... larger ones are fine as I can cut to fit.
Thanks!!!
Don O

I've got a 22 pin plug. From a William's but should work.

Shoot me your address and it's yours.

#5424 50 days ago
Quoted from 1974DeltaQueen:

Looking for the clips on an early 70’s Bally that hold the rollover button. Anyone know what size they are ? Here is the top side and then a pic of what they look like .[quoted image][quoted image]

They are called push nuts- here is a link to verify what you are talking about, but these are a bit bigger than what you are talking about
https://www.pinballlife.com/14-push-nut.html

#5425 49 days ago
Quoted from John_In_WI:

I've got a 22 pin plug. From a William's but should work.
Shoot me your address and it's yours.

Thanks for the offer, I found what I needed!!!

#5426 49 days ago

Looking for Base Hit Williams machine for parts

#5427 49 days ago
Quoted from Ant16bar2:

Looking for Base Hit Williams machine for parts

Are they title specific parts you are looking for? If they aren’t Williams made a few P & B’s within that time period that are very similar and could easily be traded out.

#5428 49 days ago
Quoted from Wmsfan:

They are called push nuts- here is a link to verify what you are talking about, but these are a bit bigger than what you are talking about
https://www.pinballlife.com/14-push-nut.html

Thx I figured out what they were called I was looking for a size. I
Might have to mic up the stem to be sure

#5429 49 days ago

X

Added 48 days ago:

Measured with a micrometer the push nut needs to fit over a shaft that is .110 inches or 7/64”

#5430 48 days ago

Looking for this piece from the shooter lane of United games of the 1940s

AB31FE98-A373-40A0-8EAB-1833EACCC8FF (resized).jpeg
#5431 47 days ago

Does anybody have any Bally 70's kickers? Marco is out of stock

pasted_image (resized).png
#5432 47 days ago
Quoted from pinhead52:

Does anybody have any Bally 70's kickers? Marco is out of stock[quoted image]

I just purchased the last two "heads" from PBR last month. Someone did mention there was a metal arm assembly that can be substituted.

#5433 47 days ago
Quoted from pinhead52:

Does anybody have any Bally 70's kickers? Marco is out of stock[quoted image]

I just took a kicker off an SI....looks similar, but dont have it in front of me. Are they the same? Also have a bally Night rider SS . Dont know if they kept the same kicker.

#5434 47 days ago
Quoted from pinhead52:

Does anybody have any Bally 70's kickers? Marco is out of stock

Everyone is out, Flippers, Gameroom guys, action pinball

#5435 47 days ago
Quoted from robertmee:

I just took a kicker off an SI....looks similar, but dont have it in front of me. Are they the same? Also have a bally Night rider SS . Dont know if they kept the same kicker.

I can confirm Night Rider EM and Star Trek are the same

#5436 47 days ago

Off os SI...looks the same but missing pin. Looking for it.

15675289760728853866868102374694 (resized).jpg
#5437 47 days ago
Quoted from JethroP:

Looking for the nylon wheel for my Bonus Unit. It is for a Bally Freedom.

ebay.com link » Lot Of Four Bally Stepper Units Pinball Parts Pinball Machines

maybe here?

#5438 47 days ago

I checked my Night Rider playfield I have for sale..have two complete kickers and they look the same as the picture.

#5439 47 days ago
Quoted from robertmee:

I checked my Night Rider playfield I have for sale..have two complete kickers and they look the same as the picture.

pm sent, thanks

#5440 46 days ago

I need qty 3 bally pop bumper mounting plates, the strip that the top side pop bumper mounts to. Restoring an EK and this pf used a later style then my original.

looks like a 3 inch long by 3/4 inch wide strip, big hole in the center then threaded holes for the pop and then two mounting screw holes.

DSC04579 (resized).JPGpasted_image (resized).png
#5441 45 days ago

Hi Ken,
I don’t have this part you've circled in red mounted on none of my 2 EK EM :
808e352b83432172554038480dda59925f69b046 (resized).png

And no trace that the two screws were ever been screwed on the playfield (no holes at all in this area).

#5442 45 days ago
Quoted from pinhead52:

I need qty 3 bally pop bumper mounting plates, the strip that the top side pop bumper mounts to. Restoring an EK and this pf used a later style then my original.
looks like a 3 inch long by 3/4 inch wide strip, big hole in the center then threaded holes for the pop and then two mounting screw holes.[quoted image][quoted image]

Is this what you need?

20190905_120025 (resized).jpg
#5443 45 days ago
Quoted from robertmee:

Is this what you need?[quoted image]

thats it. I just made an arrangement for a couple of these from Pinball Preservation. I'll let you know if they dont show up. (Shoudda hit you up)

#5444 45 days ago
Quoted from BallyCrazy:

Hi Ken,
I don’t have this part you've circled in red mounted on none of my 2 EK EM :
[quoted image]
And no trace that the two screws were ever been screwed on the playfield (no holes at all in this area).

this ek pf seems to have extra holes, may be a solid state one, hopefully no other surprises

20190904_124904_resized (resized).jpg
#5445 45 days ago
Quoted from newmantjn:

ebay.com link » Lot Of Four Bally Stepper Units Pinball Parts Pinball Machines
maybe here?

Thanks, but I did a repair on my broken wheel (ratchet) with J-B Weld and it is holding up great. Here is a link to the repair I did.
https://pinside.com/pinball/forum/topic/nylon-ratchet-wheel-repair-on-bonus-unit

#5446 44 days ago
Quoted from edward472:

PM Sent
Also looking for an odd size switch. This is 2 switch leafs stacked on top of each other. 1 leaf is 1 1/4" and 1 is 1 9/16"
[quoted image][quoted image][quoted image]

Found. too-many-pins you are the man!

#5447 41 days ago

Look for a loose EM Midway gun game stock. Don't need the hardware just the stock. Would like one from a Midway Rifle Gallery, but I know that's a super long shot.

62052326_10219608948998742_503011786430087168_n (resized).jpg
#5448 41 days ago
Quoted from edward472:

but I know that's a super long shot.[quoted image]

No pun intended.

#5449 41 days ago
Quoted from pinhead52:

this ek pf seems to have extra holes, may be a solid state one

Ding, Ding... Solid State playfields are cut different than the E.M. version.
CPR playfields drilled through the playfield for the S.S. pop bumper body bracket...
They should have just put dimple marks on the backside of the playfield.

#5450 41 days ago
Quoted from edward472:

Look for a loose EM Midway gun game stock. Don't need the hardware just the stock. Would like one from a Midway Rifle Gallery, but I know that's a super long shot.[quoted image]

I'm sure you know this, but just in case. They used actual guns for many, perhaps all, of those games. Therefore, you might have better luck looking for a stock to the gun that was on that game as opposed to looking for a stock for the game, if that makes sense. If I recollect correctly, the stock on the Midway Capt'n Kidd I had was from an old Winchester 22...I'll see if I wrote down the model somewhere.

Promoted items from the Pinside Marketplace
$ 66.95
Cabinet - Shooter Rods
Super Skill Shot Shop
From: $ 9.00
$ 22.00
$ 14.00
Electronics
Yorktown Parts and Equip
There are 5604 posts in this topic. You are on page 109 of 113.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside