(Topic ID: 93586)
Linked Games
"300"
Gottlieb, 1975-
2001
Gottlieb, 1971
-
8 Ball
Williams, 1966
-
Abra Ca Dabra
Gottlieb, 1975
-
Amigo
Bally, 1974
-
Aquarius
Gottlieb, 1970
-
Atlantis
Gottlieb, 1975
-
Bank-A-Ball
Gottlieb, 1965
There are more than 8 games linked to this topic.
Click here to show all linked games
Click here to show all linked games
Topic Gallery
Norwood, OH
Quoted from mrm_4:Anyone have this cap? Mine is broken and PBR appears to only offer 1-9
Did you call Steve personally and ask for this or just look at his site? He has many more parts that are not shown on his site so I always call them or text them.
Quoted from RWH:Did you call Steve personally and ask for this or just look at his site? He has many more parts that are not shown on his site so I always call them or text them.
Or if all else fails... try and make a decal of the artwork and get a blank cap.
Quoted from RWH:Did you call Steve personally and ask for this or just look at his site? He has many more parts that are not shown on his site so I always call them or text them.
I didn’t call. I guess I can tomorrow was just hoping someone had one on here.
Quoted from mrm_4:Anyone have this cap? Mine is broken and PBR appears to only offer 1-9[quoted image]
I have 2 original blanks with nice marbeling. PM me, if interested.
20190806_232028 (resized).jpgDesperate need for Williams 8Ball pf plastics. Three games Im working with have very curled/broken plastics. Cant even get a good scan. If anybody is in need let me know, trying to justify a run at Rescue. Can make my own with good scans but they could be $150 a set.
Quoted from izzy:Is there a part number on the board?
Sorry it took so long just got back from Pinburgh and had a lot of catching up to do. Found a part number 12G-6-100-8 also labeled as unit #000-9009.
Thanks for the assist. Also still looking for schematic if anyone had one I could use one.
Thanks again,
Al
89905E22-7350-454F-B312-CB4019AD8362 (resized).jpegQuoted from Deadlander:Sorry it took so long just got back from Pinburgh and had a lot of catching up to do. Found a part number 12G-6-100-8 also labeled as unit #000-9009.
Thanks for the assist. Also still looking for schematic if anyone had one I could use one.
Thanks again,
Al[quoted image]
Need the one on the printed circuit board. The one you picture is for the whole mechanism.
Quoted from izzy:Need the one on the printed circuit board. The one you picture is for the whole mechanism.
Got it taken apart looks like: pc#468-513 PC 468-2526 assbly #
1D42BA28-BC2C-4803-AA99-9698FC156E0B (resized).jpegQuoted from JethroP:Looking for the nylon wheel for my Bonus Unit. It is for a Bally Freedom. I suppose there are other games that use the same wheel. Anyone have something that will work? Anyone ever tried to restore the broken tooth with JB weld or similar product?[quoted image][quoted image]
OK...I did a successful repair using JB Weld. Here is a link with pics.
https://pinside.com/pinball/forum/topic/nylon-ratchet-wheel-repair-on-bonus-unit
Quoted from Deadlander:Got it taken apart looks like: pc#468-513 PC 468-2526 assbly #[quoted image]
I'll dig out my CC parts and see if I have this.
Anyone have one of these switches. Someone installed one that’s too short.
The entire switch is 1 3/8”, with the actual metal switch blades being 7/8”
I’m also still in the market for plastics from a Bally Safari and willing to pay handsomely for them if that motivates anyone. 
Quoted from Spyderturbo007:Anyone have one of these switches. Someone installed one that’s too short.
The entire switch is 1 3/8”, with the actual metal switch blades being 7/8”
I’m also still in the market for plastics from a Bally Safari and willing to pay handsomely for them if that motivates anyone.
[quoted image]
i believe you can buy the leaf switch blades from The Pinball Resource.
Quoted from DCRand:Found this plate broken in the match unit on Space Mission. Anyone have or know where I can get a replacement?[quoted image][quoted image]
Mine broke the same way, welded it up with my mig. Just a quick spot or two will do the trick. Remove the plastic pawl before welding of course.
I have four back glasses. Jacks Open, Atlantis, Jumping Jack and Sky Jump. I would consider these to be suitable replacements for trashed glasses, they are definitely not in great shape, however... PM if interested and we can negotiate price...
D8C59A3C-D8A5-46D8-AAC8-023C3E92A5C2 (resized).jpegDA373E4D-6122-496A-BF06-4718EAA84FC0 (resized).jpeg951BDF83-3214-4499-9E33-09C122F1A458 (resized).jpeg15AA5296-3EC3-40B7-981C-D5134FDEEACA (resized).jpeg2C6EC9A1-EF9C-409D-AC04-C68F2094C974 (resized).jpegF7CA334C-2D63-48C3-B651-70D903AB164E (resized).jpeg54167F85-C284-482A-A5DF-0A79CFC45E2E (resized).jpegF8286463-4D96-4581-9F6A-15AB98D81D8B (resized).jpegQuoted from DCRand:Found this plate broken in the match unit on Space Mission. Anyone have or know where I can get a replacement?
Here you go:
https://www.flippers.com/catalog/product_info.php/ratchet-armature-assy-p-2208
Quoted from EM-PINMAN:Here you go:
I have purchased that for my SM.
Improved design and worth the money.
Quoted from PinballAir:I have purchased that for my SM.
Improved design and worth the money.
I have a brand new one as well I bought 5 years ago. Holding on to mine just in case one day I end up with another Williams "In Need". A couple places already don't carry these anymore.
Quoted from Spyderturbo007:Anyone have one of these switches. Someone installed one that’s too short.
The entire switch is 1 3/8”, with the actual metal switch blades being 7/8”
I’m also still in the market for plastics from a Bally Safari and willing to pay handsomely for them if that motivates anyone.
[quoted image]
Message me if any of these switches meet your needs.
20190811_143142 (resized).jpg20190811_143203 (resized).jpg20190811_143222 (resized).jpgQuoted from ZNET:Message me if any of these switches meet your needs.[quoted image][quoted image][quoted image]
Wow, thank you so much for taking the time to post all the pictures. From looking at them though, the all appear to be too long to work.
I'm looking for some longer lengths of cloth wire.Anyone have an cloth wire for sale? Maybe from a wiring harness.
Quoted from edward472:I'm looking for some longer lengths of cloth wire.Anyone have an cloth wire for sale? Maybe from a wiring harness.
How Long? Any particular color pattern? I have a play field that I have been using for replacement wires for 1970's era pin.
Quoted from Spyderturbo007:Anyone have one of these switches. Someone installed one that’s too short.
The entire switch is 1 3/8”, with the actual metal switch blades being 7/8”
I’m also still in the market for plastics from a Bally Safari and willing to pay handsomely for them if that motivates anyone.
[quoted image]
Will these work?
IMG_3012 (resized).JPGIMG_3013 (resized).JPGQuoted from EM-PINMAN:I have a brand new one as well I bought 5 years ago. Holding on to mine just in case one day I end up with another Williams "In Need". A couple places already don't carry these anymore.
Anybody know if anyone besides Flippers has one of these. Between high cost, high shipping cost, and that they don't take credit cards. Hoping someone has another option.
Quoted from Pin-Pilot:How Long? Any particular color pattern? I have a play field that I have been using for replacement wires for 1970's era pin.
PM Sent
Also looking for an odd size switch. This is 2 switch leafs stacked on top of each other. 1 leaf is 1 1/4" and 1 is 1 9/16"
20190711_171052 (resized).jpg
20190709_172734 (resized).jpg20190709_172736 (resized).jpgQuoted from stashyboy:Looking for the right slingshot plastic for my 4-square project game. If anyone has one. Will pay cost of shipping Etc. Apologies if anyone already listed one here on the thread.[quoted image]
Quick bump. Anyone? Thanks
Quoted from DCRand:Anybody know if anyone besides Flippers has one of these. Between high cost, high shipping cost, and that they don't take credit cards. Hoping someone has another option.
Strange. Shipping is usually reasonable, just takes time coming from Canada and I paid via credit card in the past.
Here is another, not cheaper.
http://jtamusements.com/store/index.php?main_page=product_info&products_id=1376
Quoted from EM-PINMAN:Strange. Shipping is usually reasonable, just takes time coming from Canada and I paid via credit card in the past.
Here is another, not cheaper.
http://jtamusements.com/store/index.php?main_page=product_info&products_id=1376
Thanks, waiting for answer from Flippers if I can pay without having to mail a money order. If can't, appreciate the second option.
I have found flippers.com to be pricey as well but sometimes you have no choice.
I do not remember being upset by the cost of the part and i am ALWAYS upset by shipping and "handling" at all the vendors so if it was high I would have just mumbled under my breath a few choice works that would be inappropriate here.
Quoted from edward472:PM Sent
Also looking for an odd size switch. This is 2 switch leafs stacked on top of each other. 1 leaf is 1 1/4" and 1 is 1 9/16"[quoted image]
Not sure about the switch but got you 7'11" of cloth wire looks to be about 16 gauge
IMG_3014 (resized).JPG
Bulli
Quoted from DCRand:So wild chance question. King of Diamonds roto target mechanism?
just a suggestion, there is a guy on ebay that has a set of playfield plastics and various parts listed. maybe try him?
(sorry don't have the link as ebay is blocked at work).
Quoted from DCRand:So wild chance question. King of Diamonds roto target mechanism?
You could try Herb Silvers, he's always restoring thses. I do have a complete KoD head
Quoted from DCRand:So wild chance question. King of Diamonds roto target mechanism?
Contact pinsider toomanypins on here as he may have what you're looking for.
Quoted from illawarra92:wanted gottlieb gondolier backglass from 1958[quoted image]
Pity this one is not so good.
Quoted from gdonovan:cnj.craigslist.org link
Pity this one is not so good.
That has been for sale on eBay for what seems like an eternity. At this point I’m sure it could be picked up super cheap or in exchange for a repair on another machine that they have because it looks like they need some help.
Does anyone have a parts one ball horse race game? I would like to find a lockbar with some buttons on it. Ideally from a Turf King or Sunshine Park. Don't need the glass, the siderails, or the wooden frame, only the lockbar with buttons.
Thanks!
Quoted from wayner:Re a GTB Skyline I am needing a scan or description of the graphics on the card in the light box which describes the jones plug orientation to the elevator arrow stepper. Card in pic in ipbd in upper left hand side is not clear incl on zoom. Thanks.
[quoted image]
did you look at these?
http://www.pinballrebel.com/pinball/cards/ gottlieb
pasted_image (resized).pngQuoted from pinhead52:did you look at these?
http://www.pinballrebel.com/pinball/cards/ gottlieb[quoted image]
Yes had checked Peters' site Ken.
I picked up a 1963 swing along . Was in pretty bad shape but I’m going through and making it nice . It came without legs and I’m not sure what type of legs this style cabinet uses (cabinet has lower part in front). No pics of legs on a game on ipdb . I will just buy new legs that are suitable but I would like to know if they should be the same length in the front and the back . Any suggestions of suitable legs from what is available at pinballlife?
0C23AE06-BE3D-47A8-A3EC-6E697AD2B77B (resized).jpegQuoted from trilogybeer:I picked up a 1963 swing along . Was in pretty bad shape but I’m going through and making it nice . It came without legs and I’m not sure what type of legs this style cabinet uses (cabinet has lower part in front). No pics of legs on a game on ipdb . I will just buy new legs that are suitable but I would like to know if they should be the same length in the front and the back . Any suggestions of suitable legs from what is available at pinballlife?[quoted image]
Someone in an older thread confirmed their Shipmates (another Gottlieb drop front cab) used 27" in the front and 31" in the back. Does Pinballlife sell Gottlieb style non-ribbed legs? If so then you could order 2 of each. Otherwise PBR has them.
Quoted from AlexF:Someone in an older thread confirmed their Shipmates (another Gottlieb drop front cab) used 27" in the front and 31" in the back. Does Pinballlife sell Gottlieb style non-ribbed legs? If so then you could order 2 of each. Otherwise PBR has them.
Thank you ! Pinball life does not have gottlieb legs but they do have Williams style non-ribbed . I was hoping those would be fine but they are 28.5 inches , I will get legs from PBR .
Quoted from AlexF:I have a spare set of decent 31" at home but no 27".
I’d be interested in those if you are looking to sell , gets me halfway there and it won’t bother me if the the back legs are not as nice as the front . I will be finishing up with the cabinet painting next week and I’d like to get it up on some legs so I can start re assembling the cabinet . I know I’m going to need other parts for this game also I know other stuff is missing.
Quoted from trilogybeer:I’d be interested in those if you are looking to sell , gets me halfway there and it won’t bother me if the the back legs are not as nice as the front . I will be finishing up with the cabinet painting next week and I’d like to get it up on some legs so I can start re assembling the cabinet . I know I’m going to need other parts for this game also I know other stuff is missing.
How about a three way deal? I have a couple of extra decent Gottlieb 27” legs that I would trade for a couple of 31” Gottlieb legs.
Promoted items from Pinside Marketplace and Pinside Shops!
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
