I placed a small rubber at the end of ramp where the ball falls in to the gun as mine would let the ball fall out of gun too. It really slows the ball down and works 99% of the time. Its a round rubber that is flat on one side and looks like a rubber grommet. Has to be small enough to still let the ball fall without impeding it.

This is a link to something similar that I used. I had to modify the end of it to fit between the ramp.
http://www.pinballlife.com/index.php?p=catalog&mode=search&search_in=all&search_str=rubber+grommet . I cut the nub part to fit between the wire form.

Here is my solution.

152.JPG

Even on the PAPA video of the first DH video, you ball falls out of the gun at around the 2.29 mark.

Glad it helped, such a let down to see the ball roll out of the gun as your really getting into the game.

There is a plastic that goes from the start of the ramp upper post and goes along side the safe house and around the back of it.

The metal piece is right above the magnet, so I would assume that it protects against airballs from the magnet not being level.

If no has posted a pic of it , I can post one after work today.

Here's the plastic around the safehouse, kind of hard to ge a good shot without taking stuff apart.

Here's the plastic around the safehouse, kind of hard to ge a good shot without taking stuff apart.

002.JPG 003.JPG

The grommet works great, its cheap and does require any modifying. On mine the gun resets in the up position most of the time, but when it doesn't this fixed it.

Never had that happen either, so can't really help with that one.

You need to remove the magnet and file down the mushroomed head and then adjust it with the screw. I did it on mine and have not had a problem since. You can use the side of a bench grinder or I just used a regular large flat file and made sure I kept it flat while filing

I made it to crime wave a few times , two arrests is my best so far. Came close to three once. Congrats.