Are you looking for Game blades?
https://www.tiltgraphicsinc.com/product-page/dirty-harry-gameblades
(Topic ID: 55507)
Linked Games
Dirty Harry
Williams, 1995
Topic Gallery
You're currently viewing posts by Pinsider Kas24.
Click here to go back to viewing the entire thread.
1 month later
1 year later
Need to adjust the wire ramp leading to the gun all the way back towards the right side of the pin.
Quoted from jhanley:Is there any way to keep the ball from falling out of the gun? Only happens sometimes.
If you mean the ramp with the helicopter I make that shoot all the time to get the jackpot.
Quoted from TheLaw:No you can't shoot the right ramp with the gun
Anyone make plastic set or ramps for this pin?
I posted one plastic I'm looking for. Need both under the gun (right side)
Quoted from TheLaw:Not with the gun you don't.
I do... I know what I shoot and I make most of the time.
Quoted from bssbllr:No video it didn’t happen.
Once I finish shopping the pin I'll post it. Sorry never occurred to me to shot video...
Quoted from TheLaw:Fair enough.
Is there a reason you shoot it when it's worth less than the other ramp?
Honestly, I didn't realize it was worth less. I'm going to try the left ramp out. I thought they both has the same points value. Good to know.
Quoted from RTS:I expect we will hear that it used to work before you shopped the game.
I'm really curious about this.
Why is this such a mystery.. what is the big deal. Try it it is not that difficult. I guess from now on I'll video tape all my game play... ridiculous
Quoted from TheLaw:I expect the gun is not mounted and hanging over the PF sideways held up by 2 wires?
Gun is mounted fine. No need to be a an ass
Quoted from bssbllr:Just made that shot with the gun have a video do not know how to upload. I got your back.
Thank you!
These guys are a joke... just try it and fine out for yourself.
Quoted from TheLaw:Haha simmer down dude. You just invented something none of us knew was possible; I'm honestly shocked.
I'll try it tonight.
Ok i just felt attacked.. anyway now I'm going to try the left ramp LOL!
Quoted from TractorDoc:Not saying it cannot be done, but I don't think my gun rotates to an optimal angle to shoot the ball up the right ramp.
With the force the ball has coming out of the gun I'd be worried about cracking my ramp plastic too.
I give a three second count from when the gun begins its upward rotation and can typically hit the left ramp nine out of ten times.
Its also the super jackpot, so why not go for it instead of those measly regular jackpots?
My ramp has cliffys on both sides so it rockets up the ramp. I wasn't worried about breaking the ramp since it was protected on both sides. Not sure if this if this was added or original. But as discover I need to make the left ramp for points. Thanks for the tip!
IMG_5182 (resized).jpgIMG_5183 (resized).jpgQuoted from Captainclown:Link to person who does this please? Ohio if I remember.....
Thank you and looks awesome.
He does great work!
Robert stone
13165 leeper perkins rd
Marysville OH 43040
Cell 9048601666.
https://pinside.com/pinball/forum/topic/powder-coating-services-offered/page/8#post-4081479
1 week later
1 week later
2 weeks later
Quoted from PAR:No luck with switch 77, but thank you, so I continue trial and error on other things. On another note anyone seen an insert as nasty as this one? Thinking of just painting this ugly thing, any other ideas to clean it up?[quoted image]
Try a magic eraser. They work well.
1 week later
Quoted from RSKrouse:See above post
No I preferred powder coating. But I use a epoxy enamel on my other arcade parts and it is very similar to power coat finish.
I hope this helps.
https://www.amazon.com/Krylon-K00300777-Epoxy-Enamel-Spray/dp/B07NPDMF2F
Quoted from RSKrouse:That's helpful. Thank you. I noticed in your picture of the gun mounted to your machine that the legs are also black. Looks good next to the gun and door. Did you also blacken the lockbar and side rails or leave those chrome?
I left those chrome and bought black legs from Pinball Life.
Promoted items from Pinside Marketplace and Pinside Shops!
Plantsville, CT
You're currently viewing posts by Pinsider Kas24.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
