Is the right pinball mech not missing 2 screws at the coil stopper end?
Quoted from pinballrockstar:Gonna go oldskool tonight people!
Cheers!
Bestskool!
Quoted from Drewscruis:Personally I would have routered the edge of the playfield instead of modifying every target
Ah yeah,forgot that was an option,we did that on despicable me
Quoted from Travish:I was starting to get worried. There hadn't been any grinding or welding in weeks.
Yeah my fingers itched for grinding man
Quoted from DDDwingmaster:Is the right pinball mech not missing 2 screws at the coil stopper end?
Yeah they totally do,gotta source 2 of those
Quoted from oldskool1969:Bestskool!
Nothing beats a Bally
Quoted from pinballrockstar:Ah yeah,forgot that was an option,we did that on despicable me
Amateurs!!
Quoted from meSz:Amateurs!!
Hahaha...we actually ARE total amateurs!
Just trying to create something awesome while entoxicated
Every saturday morning is a surprise
great work guys! stoked about the shirt, I will take a week off of work and just pull up a lawn chair by the mailbox and wait for it...
I just delivered the shirts at Staples office centre’s post desk.
Kinda miscalculated the shipping lol
If there is more than one shirt in a package,the shipping increases dramatically?
But hey...it’s for a good cause,our pinball friends out there,the cancer foundation and pinside.
So no sweat.
The gear is on its way guys!
Quoted from Wolfmarsh:Can I chip in more for my shipping?
Hey buddy,you already send some extra by rounding the number you send us so we are all good.
But you totally needed a little box instead of a cardboard envelope.
But you also had the biggest order
So fair enuff!
We still have to send the Swinks order,only one annoying bastard wants an orange shirt!
we love you Swinks
We are receiving that any moment now.
Fun process and would be cool to see someone wearing an amigo shirt on some pinball event far away
Mic did a nice job,hope you guys like the shirts!
Btw:
Go figure...just started on the code (v33.49 or sumtin...)
And the MPF steps up to v50.09
Currently trying to change to that,you now the drill...nothing on the machine works anymore...
Giant sad face!
(And yes..my computer is named Elise,stole it from my daughter..)
Quoted from pinballrockstar:Hey buddy,you already send some extra by rounding the number you send us so we are all good.
But you totally needed a little box instead of a cardboard envelope.
But you also had the biggest order
So fair enuff!
We still have to send the Swinks order,only one annoying bastard wants an orange shirt!
we love you Swinks
We are receiving that any moment now.
Fun process and would be cool to see someone wearing an amigo shirt on some pinball event far away
Mic did a nice job,hope you guys like the shirts!
sorry to be a pain, should of just said so - was just going for the full dutch experience - miss the mother (& father) country....
really appreciate the custom and owe you guys a feature / design down the track
Quoted from swinks:sorry to be a pain, should of just said so - was just going for the full dutch experience - miss the mother (& father) country....
really appreciate the custom and owe you guys a feature / design down the track
No sweat bro!
Just pulling your leg
Quoted from pinballrockstar:No sweat bro!
Just pulling your leg
yeah I know, no offense taken, gave me a laugh
Quoted from pinballrockstar:And the MPF steps up to v50.09
And I'm staying on 33. It'll take months to put it all right again.
Quoted from epotech:And I'm staying on 33. It'll take months to put it all right again.
Yeah,despicable me project got stuck at v21 too....i had so much time invested in the code and i am so bad at writing it...
I downloaded the older tutorial and build it on that version.
I am not that far with TCM code but it was already a pain yesterday.
But now i got it on v50.09 , i must say i am quite motivated to add the latest MPF innovations.
TCM will be full of motors and it is gonna work well with v50..
Quoted from Pahuffman:It's Friday! Prepare for an earbleed:
» YouTube video
Music to my ears,friday
Quoted from Atari_Daze:Very cool, was that laser cut, water jet? It's time you give us the deets!
Handmade with a dremel!
Great news by the way!
Our polulu from Germany arrived!
It is a MPF supported servo controller so yeah...if i can make this work with some code...we can make this pinball machine epic...
We can open doors and stuff
14566997-BB45-48D9-BB3F-70A3E50A237F (resized).jpeg
011465A1-A883-46CF-B5FE-3A3286EE3562 (resized).jpeg
Me i am racing to our hardware store for more wood for the backbox.
Also buying a router today,want my own router so mic can take his one home...
E4D9935D-E339-447D-B30E-01E0789EF0C8 (resized).jpeg
2393CE70-3F1B-47A2-BA20-684C612D9D3E (resized).jpeg
CABAD1A7-6039-4073-9618-DF91E4744C41 (resized).jpeg
This multiball lock mech is from our roadshow wreck...it firs next to the lcd but the original subway feed needs to change from side loader to front loader...easy...just cut a piece out and weld it back in on the other side
7F6A716A-BB6C-4C2D-B441-6549BA792D2E (resized).jpeg
1D2B46BE-BC02-4BDC-8C69-E8ABED523E95 (resized).jpeg
456EBD60-4F94-4268-8785-01EBEB65FD78 (resized).jpeg
24A97DB7-3205-4DB2-A51F-DCCA7D023963 (resized).jpeg
Quoted from WJxxxx:Although this made me laugh.
XL "Slim Fit"
Awesome news bro!
Everybody looks great in an amigo shirt!!
Real happy it arrived save and sound
Thanks for participating!!
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-crazy-mansion-by-the-pinball-amigos/page/75 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.