Dealing with a shipping damaged TBL. The "Front Main Board" was damaged by the bowling mech due to the lockdown bar being shifted too low (assume when it was dropped.)

The symptom I have is the right flipper is dead, and I can see a few SMD components are damaged/missing. I assume the left visually similar circuit is the left flipper and can ID the resistors but not the capacitors. Does anyone know what the white capacitor values are or have a schematic that might be able to identify them?

Left flipper circuit
S20211127_019 (resized).jpg

Right flipper circuit
S20211127_020 (resized).jpg

SMD cap I need to ID for replacement
S20211127_018 (resized).jpg

Shipping damage isn’t covered under warranty, costs EUR 295,00 excl shipping (estimated EUR 75,00)

Game was not delivered to me damaged. I purchased secondhand knowing it was in this condition.

I think cointaker may still be helping me get a replacement (don’t yet know for what cost if any), but wanted to try to repair anyway while I wait.

Thanks Rensh

Thanks Rensh and team!

That’s not a D it’s a 0, and it’s a standard for SMD resistors (E1A-96)

01A ⇒ Code 01 = 100 with Multiplier A = 1 ⇒ 100 x 1 = 100 Ω ±1%

And you base this on.. Hopes and wishes?