For those experiencing a weak upper flipper for the Mini playfield I have the following message.
DP discovered that an error has been made with wiring the flippercoil of the MPF with several TBLs, especially those made 2019 and earlier. This causes that the Hold and Power part of the coil have been switched causing a weak flipper. Talked this over with Barry and he knows I am posting the fix here.
Mine had this to and as desoldering and resoldering a wire on the coil is easier for me as mounting a new connector (error was made on the connector) so I solved it via soldering. So DO NOT look at the color of the wires but to the POSITION of the wires.
As you can see in attached pictures the connector is DR18 and is positioned close to the stepper motor.
So:
1) the most left wire on the connector (white in this case) goes to the total right on the coil
2) the middle wire on the connector (purple in this case) goes to the total left on the coil
3) the right wire on the connector (orange in this case) goes to the middle of the coil.
Again, DO NOT look at the color of the wire as this can be different with you, purely to the position of the wire on the connector versus the position of the wire on the coil !!
This makes shooting the ramp much easier
IMG-3637.JPGIMG-3638.JPG