The Big Lebowski
Dutch Pinball, 2016Quoted from cpr9999:All,
Decals are at the print house and hope to have real soon.
I had a last minute thought of adding this decal (bowling banner), but did NOT add because I thought it was so-so.
Let me know your thoughts (good call??):
One picture is from movie - the other was potential decal for game.[quoted image][quoted image]
Looks good. Can you post a pic with the playfield down?
Been working hard the last few nights modding this baby up....so this is where it's at now... spending some time playing now until more stuff shows up! 
Beautiful and fun game...as a big TBL fan getting this game is a no brainier!! P.S. This is SELF PROCLAIMED TBL Zig Zag Man Edition #13 I also have Zig Zag Man badge #69 gotta have some fun! Chromed out ...Enjoy Dudes!!
6290B207-145E-4DD8-B1C4-612845D47D62 (resized).jpegB9986A0B-EE2A-4B4D-AC1F-449AB09ABF93 (resized).jpeg3405BC75-CD26-43C6-A79B-3A6BA0D4474D (resized).jpegCF53DF72-8CB1-46E1-92AF-33018BFB0632 (resized).jpeg
Quoted from Rensh:Made a video showing the proto EA apron. Best place to see it in action is after the last ball
What power do you have your flippers set at? They look much snappier than mine!
Quoted from BladeFury:Been working hard the last few nights modding this baby up....so this is where it's at now... spending some time playing now until more stuff shows up! Beautiful and fun game...as a big TBL fan getting this game is a no brainier!! P.S. This is SELF PROCLAIMED TBL Zig Zag Man Edition #13 I also have Zig Zag Man badge #69 gotta have some fun! Chromed out ...Enjoy Dudes!!
[quoted image][quoted image][quoted image][quoted image]
Looking awesome!!
Quoted from ChipScott:Looking awesome!!
Thanks my friend!
Quoted from titanpenguin:Where did you snag the coin door from?
Quoted from titanpenguin:Where did you snag the coin door from?
Contacted Josh at PinballDecal and he didn't have any and may quit plating so....listed an ad and was contacted....Bought Coin door, Hinges and Chrome bolts from dasha126 pinsider...Contact him as I think he does plating! Great guy
Quoted from BladeFury:Contacted Josh at PinballDecal and he didn't have any and may quit plating so....listed an ad and was contacted....Bought Coin door, Hindges and Chrome bolts from dasha126 pinsider...Contact him as I think he does plating! Great guy
Thanks!
Ok.
I will include “Stars and Strikes Forever” banner in upcoming decal set.
With that some asked about visibility.
Here was the original decal:
Image 1 was with playfield lifted up.
Image 2 was standing position.
Image 3 was standing but putting head down to look at pins while bowling.
62F08E9C-56A9-4B1B-AB83-49732E3D7933 (resized).jpeg87767E55-E208-4729-B5B5-F0FA9612ABB7 (resized).jpeg5D44EA19-AD2C-4398-B6A9-1DA4E3C917D8 (resized).jpegQuoted from cpr9999:All,
Another mod (that sd_tom designed.)
It is the black piece that squeezes the plastic ramp together right before it transitions to metal ramp. Without the mod the plastic relaxes out and the ball hits the metal ramp and rejects from going down.
I have access to 3D printer and can print a bunch of these.
So I am willing to do a 1 time print run if there is enough interest. To cover costs of printing and shipping it will be approximately $15. Note, my timing on this one is approximately next 2-3 weeks.
PM me. I will post back if it is a GO.
Thx
[quoted image][quoted image]
I have these ready to go:
0E204D43-A06F-4C6A-8414-BAD5C1653E36 (resized).jpegQuoted from cpr9999:I have these ready to go:[quoted image]
Need one!
Quoted from cpr9999:Assuming everyone likes the smaller decal cuz you can see more????
Agree??
Look great!
Quoted from JustLikeMe:What power do you have your flippers set at? They look much snappier than mine!
Don’t know the value but didn’t change it so default Factory setting.
And yes, the flippers are very snappy and do their job excellent.
Quoted from whitey:Lets go bowling looks good, I need to find Led doobie mod, Lebowski driver’s license
I will have lights doobie mods later this month for everyone.
D8AEDDAE-2CCB-4B37-9D4F-8B4A46BA1B9E (resized).png
Quoted from cpr9999:I will have lights doobie mods later this month for everyone.
[quoted image]
Fucking A man. Mind if I do a Jay?
Hey everyone! I'm super new here and relatively new to the inner workings of pinball. I was fortunate to come across a TBL as my first real pin so I'm learning as I go. I have a couple questions some of the more experienced folks can help with.
1. Does anyone know the size rubber on the slingshots? 2.5"? 3"? One of mine is getting worn and may snap soon.
2. Is there an owners manual for TBL (mainly, so I can look up answers to questions similar to above)? Some of the other threads from a few months back say one is on the way but the thread has been kinda quiet since. My machine didn't come with one from DP.
Thanks again!
Chris
Quoted from xtremepacker:Hey everyone! I'm super new here and relatively new to the inner workings of pinball. I was fortunate to come across a TBL as my first real pin so I'm learning as I go. I have a couple questions some of the more experienced folks can help with.
1. Does anyone know the size rubber on the slingshots? 2.5"? 3"? One of mine is getting worn and may snap soon.
2. Is there an owners manual for TBL (mainly, so I can look up answers to questions similar to above)? Some of the other threads from a few months back say one is on the way but the thread has been kinda quiet since. My machine didn't come with one from DP.
Thanks again!
Chris
First, wow. Your first pin is TBL! Way to jump in big. Don’t recall the size but they do have the size embossed on them and both are the same. Sorry not much help.
Quoted from xtremepacker:Hey everyone! I'm super new here and relatively new to the inner workings of pinball. I was fortunate to come across a TBL as my first real pin so I'm learning as I go. I have a couple questions some of the more experienced folks can help with.
1. Does anyone know the size rubber on the slingshots? 2.5"? 3"? One of mine is getting worn and may snap soon.
2. Is there an owners manual for TBL (mainly, so I can look up answers to questions similar to above)? Some of the other threads from a few months back say one is on the way but the thread has been kinda quiet since. My machine didn't come with one from DP.
Thanks again!
Chris
Wow! TBL as a first pin! There’s a story there. Care to share how you got it?
Laser etched some 2.75” pins with Brunswick logo.
Where should I place them on the playfield? Looking for input. Thx
7A9F096B-A72F-49C0-94D6-322979EDF36D (resized).jpeg872F3C82-DF9B-42BA-A1E2-A46223707012 (resized).jpegCB1B98BC-F6D1-4541-8290-0A429299FAE1 (resized).jpegF0754A86-3A75-447F-9AA9-6A81A7B561A7 (resized).jpegQuoted from cpr9999:Laser etched some 2.75” pins with Brunswick logo.
Where should I place them on the playfield? Looking for input. Thx[quoted image][quoted image][quoted image][quoted image]
The three pins next to the rug look cool!
The Creedence Has been Found Dudes! Introducing our Illuminated solute to Creedence! Soft LED lighting with a scaled cassette tape ready to install on the right or left side of the playfield. Simple installation and theme fitting. Designed as a Plug and Play mod with our OPTIONAL wire harness so no harm becomes of the Dude and is completely reversible. Available Now from our website store!
www.TheModCouplePinball.com
1 (resized).jpg2 (resized).jpg3 (resized).jpgQuoted from Yelobird:The Creedence Has been Found Dudes! Introducing our Illuminated solute to Creedence! Soft LED lighting with a scaled cassette tape ready to install on the right or left side of the playfield. Simple installation and theme fitting. Designed as a Plug and Play mod with our OPTIONAL wire harness so no harm becomes of the Dude and is completely reversible. Available Now from our website store!
www.TheModCouplePinball.com[quoted image][quoted image][quoted image]
Very cool! Is the cassette always lit, or connected to a mode?
Quoted from adamross:Very cool! Is the cassette always lit, or connected to a mode?
Just a light illumination. As there is no Creedence mode its just an accent.
While I wait for the target decal stickers at the printer......back to Doobie mod.
Need some input:
(Note both A and B options will have red/orange, glowing LED lit ash. Wood versions below don’t have that on them yet below).
A. Traditional paper doobie
OR
B. Wood ink pattern doobie (bit bigger doobie!)
Note, showing where mod would be / could be located).
BE59FA0B-9294-466C-BB78-7D7CB4D66B1E (resized).png322C18A3-5D38-4A09-A733-B96DF3919F3D (resized).png9F08C0B2-F2BA-47E8-83EE-EC78447942F5 (resized).png184D2F86-4C97-4A7D-A565-CB34630D8177 (resized).png
A looks best, but could you shorten by 3/4 inch, as I don’t recall any rolling papers being that long. It would be comparable in length to your other options. The burnt end with led looks perfect, btw.
Quoted from cpr9999:While I wait for the target decal stickers at the printer......back to Doobie mod.
Need some input:
(Note both A and B options will have red/orange, glowing LED lit ash. Wood versions below don’t have that on them yet below).
A. Traditional paper doobie
OR
B. Wood ink pattern doobie (bit bigger doobie!)
Note, showing where mod would be / could be located).
[quoted image][quoted image][quoted image][quoted image]
OK - great.
Option A it is!
Thx everyone.
Sticker decals installed on targets, coin door, Doobie mod sticker by shooter, and banner sticker above bowling lane like in the movies. I haven’t installed the spinner decal (big Lebowski character and Treehorn sketch). See pictures below.
Note, there are spare Target stickers (some in multiple colors), spinner and coin door stickers!
(Prices below don’t reflect shipping/handling. I will combine items for cheapest shipping).
** 20 Decal sticker sheets - $40 each (shipping NOW).
**20 Ramp clip / ramp brackets - squeezes ramp so ball does not hit metal rails. $15 each (shipping NOW).
**4 spare, backup harddrives left $100 each. Ping me to get one of them.
**0 spare audio cards. Ping me to get on the list for another order. If/when we get to 5 I will order them again. $200 each.
**20 Doobie mods - $35 each - will not be ready for 2 weeks - waiting on parts.
Please add $8 shipping for 1 item, $10 shipping for 2 items, and $12 shipping for 3 or 4 items. Trying to make shipping easy. Note this is US shipping. Canada add $10 to each shipping category. Europe add $15 to each shipping category. If shipping is a concern ping me and I can see what I can do for international prices, depending on location.
Thx
-cpr9999
803A6EB2-C675-46FE-982C-44686314F464 (resized).jpeg0E735055-9312-42FA-AF2B-35BB941FFB73 (resized).jpeg417EFBDA-DD23-48B6-9AE3-06E1797E5E73 (resized).jpeg6F0DE42A-05F7-4DFC-8E6C-8821828A632E (resized).jpegD7C3192E-E661-4193-AB2C-4F3F1592BD8C (resized).jpeg8A273532-7BE9-47DA-80FC-EB21CCF69030 (resized).jpeg963F8B2F-CBE3-4BF5-8C10-A5A170BAE4BE (resized).jpeg9ECDFC97-2C0D-44BD-BB35-D37FE9A4EBAF (resized).jpegACA1E403-467A-46E1-A9D7-4D89177D8D10 (resized).jpegFFB9BF3B-08F9-4895-B3D0-C3FCEB1D7A83 (resized).jpeg8EA27424-DD4C-4920-A0CF-C6201901F4C2 (resized).jpegE5F212A2-8EB6-42B6-95FB-D32BA7E7A642 (resized).jpeg
Quoted from cpr9999:Sticker decals installed on targets, coin door, Doobie mod sticker by shooter, and banner sticker above bowling lane like in the movies. I haven’t installed the spinner decal (big Lebowski character and Treehorn sketch). See pictures below.
Note, there are spare Target stickers (some in multiple colors), spinner and coin door stickers!
(Prices below don’t reflect shipping/handling. I will combine items for cheapest shipping).
** 20 Decal sticker sheets - $40 each (shipping NOW).
**20 Ramp clip / ramp brackets - squeezes ramp so ball does not hit metal rails. $15 each (shipping NOW).
**4 spare, backup harddrives left $100 each. Ping me to get one of them.
**0 spare audio cards. Ping me to get on the list for another order. If/when we get to 5 I will order them again. $200 each.
**Doobie mod - will not be ready for 2 weeks - waiting on parts. I will ship this one separately.
Thx
-cpr9999
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
Decals look great nicely done.
How is build quality and reliability of Dutch pinballs latest batch, I have one Enroute as we speak...
Quoted from PinheadEDM:How is build quality and reliability of Dutch pinballs latest batch, I have one Enroute as we speak...
Pretty bad - you need to reroute your machine to me 
Quoted from PinheadEDM:How is build quality and reliability of Dutch pinballs latest batch, I have one Enroute as we speak...
Nice! How long have you been on the waiting list?
Quoted from Mitch:Just got mine. Glad to be part of the club!![quoted image][quoted image]
Awesome congrats! Going to be a fun weekend
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-big-lebowski-official-club-thread/page/17?hl=robertstone0407 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Mequon, WI
Southbourne
Wellesley, ON