**********************
* *
* STERN PINBALL, INC. *
* (C) COPYRIGHT 2007 - 2021 STERN PINBALL, INC. *
* *
**************************************************************************
* *
* THE BEATLES *
* *
**************************************************************************

HELP US, HELP YOU! If you have any suggestions, questions, need technical
advice, find errors or have comments, contact us through our website:

http://www.sternpinball.com/contact.shtml

or call 1-800-542-5377. You can also email [email protected] to
report any software problems.

This text file and all other documents relating to this product, playfield
components, features, rules, programming and operation are subject to change
without notice (Service Bulletins, if applicable, available through our
website).

Update instructions - Games connected to Stern Insider Connected:

1 - Open the coin door and press the black/enter button to enter Test Mode.
2 - Using the 4 buttons on the coin door, navigate to the Stern Insider
Connected Setup menu.
3 - Using the 4 buttons on the coin door, navigate down to the Software Update
menu.
4 - If a software update is available, this page will give you the option to
download and install it manually. From this menu you can also select to
install these updates automatically.

Installation notice:
This code release contains a single file ending in .spk

Update instructions:
1 - Download the spk file.
2 - Copy the spk file to the root level of a FAT32 formatted USB stick.
3 - Remove the USB stick from your computer when it is finished writing.
4 - Power the game off.
5 - Insert the USB stick.
6 - Turn the game on.
7 - After the game boots up, there will be an option for software update.
8 - The volume buttons change options for full or quick update. The enter button selects the option and starts the update.
9 - Once the update is completed, the game will prompt user to power game off and remove USB stick.

V1.20 - December 16, 2021
=======================
- *NEW* Insider Connected - achievements added. see achievement list on https://insider.sternpinball.com/

Bugs:
- Fixed a case where mystery could award extra ball or special in competition mode
- Prevent Multiball Super Jackpot instructions from playing after multiball has ended

Enhancements:
- Added high score table for FAB FOUR, which is the total of a 4-player game
- Increased Beatlemania Base Jackpot value to 400k and boost to 50k, Taxman starts at 800k

System Changes (Version 3.01) on OS: 2.6.0 which includes the following:
- Updated to nodeboard firmware/protocol v0.81.0

- Added Standard Adjustment "LCD DISPLAY BRIGHTNESS" to allow dimming of LCD display.

- Added adjustments for Login and Play Again display timers:
AD_NET_LOGIN_TIMER - "INSIDER LOGIN TIMER" default 30 sec
AD_NET_PLAY_AGAIN_TIMER - "INSIDER PLAY AGAIN TIMER" default 20 sec

- GAME RESTART (hold start button) behavior change:
Holding the start button on ball 2 or greater will follow the
logic of the AD_START_BUTTON_BEHAVIOR adjustment.
If (AD_GAME_RESTART == YES) and (AD_START_BUTTON_BEHAVIOR == ADV_START_BUTTON_BEHAVIOR_ALL_LOGGED_IN)
holding the start button on ball 2 or greater will restart the game for as many
players as is necessary to accomodate the users that are logged in.
If there are not enough credits to restart the game for the necessary number
of players, the the game will not be restarted.

- Upon entering the Service Menu for the first time after a software update, a screen
will display the game and system version numbers. This screen will be displayed
for a minimum of 1 second, and is dismissed by the enter button. This replaces
the dots display previous shown at power on after an update.

- LOGIN behavior:
* When a user logs in during a game in progress and the player up slot
is occupied, assign the user in the first open slot from lowest
player to the highest player.
* When a user joins a game in progress, award achievements that were
earned up to that point.
* When user authorization failure, remove the user from the session.

- Added audits for connectivity games and scanner use
"CONNECTIVITY USERS SCANNED" - display the number successful user QR code scans
"CONNECTIVITY USERS JOINED" - display the number of users that joined a connected game.
"1 INSIDER GAMES" - display the number of games played with 1 logged-in users
"2 INSIDER GAMES" - display the number of games played with 2 logged-in users
"3 INSIDER GAMES" - display the number of games played with 3 logged-in users
"4 INSIDER GAMES" - display the number of games played with 4 logged-in users
"ACHIEVEMENTS GIVEN" - display the number of achievements awarded

- Adjustment: "START BUTTON BEHAVIOR"
"SINGLE CREDIT" - One start button press will start a one player game.
"ALL LOGGED IN" - One start button press will start games for enough players
to accommodate all logged-in users (Default).

- Added Standard Audit "Total Power Ons" which will display the number of
time the machine has been power cycled (Spike2 only). This audit was added in
system 2.45 and is not included for display.

- Update HSTD RESET COUNT adjustment to increment/decrement by 100s when >= 100 and
by 10s when < 100

- Turn on cabinet lights, if installed, when in the Service Menu.

here's a bargoon on Beatle shaker motors https://www.donniedoit.com/beatles-beatlemania-stern-spike-shaker-motor-p-283813.html

how do you select classic mode ?

one or both ?

yes got it thanks !

for which targets ?

is there room for a few washers ?

something like this might work https://www.marcospecialties.com/pinball-parts/02-4176-16