If it will help. On my Williams pins with AE 2411 validators, this is how I have them set.
1 - off, 2 - on, 3 - off, 4 - on, 5 - on, 6 - on, 7 - off, 8 - off.
LTG : )
You're currently viewing posts by Pinsider ltg.
Click here to go back to viewing the entire thread.
If it will help. On my Williams pins with AE 2411 validators, this is how I have them set.
1 - off, 2 - on, 3 - off, 4 - on, 5 - on, 6 - on, 7 - off, 8 - off.
LTG : )
Quoted from Deez:I swapped the door from my wcs over and ground the top lip to get it to fit but the magazine is bumping up against the flipper mech.
Different playfields/ball troughs in both games.
TAF wasn't designed for a bill validator. ( TAFG was ) 300 or less capacity will fit in both.
LTG : )
Quoted from crashnt20:Does anyone know where the thread is to convert addams family to take a DBA?
Tap the AC into the AC line. ( unplug the game ) and switch wires piggy back onto one of the coin switches.
Pyramid will work, they'll help you with questions if you need it.
TAF didn't come with a coin door that can use a bill validator, TAFG did come with a coin door with a bill validator capability and wiring already installed.
LTG : )
You're currently viewing posts by Pinsider ltg.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/the-addams-family-bill-acceptor-problem?tu=ltg and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.