Adventures of Rocky and Bullwinkle and Friends, The
Data East, 1993You're currently viewing posts by Pinsider kba78.
Click here to go back to viewing the entire thread.
Hi all,
I am going to be building a backbox door for r&b. I was wondering if someone could provide me some measurements for the placement of the big holes for the animation. A good picture of the front and back would also be helpful.
Thanks so much for any help you can provide.
Quoted from scottacus:Thanks for the kind words JJG8591, there are about a 18 of these units out there in Pinsiders machines. The details are on page 15 of this thread but I've redesigned the unit a coupe of times since the original board pictured in the post. BTW that board is in my machine and puts Nell in peril on a nearly daily basis. The new board design looks like this.[quoted image]
I put one, in a few months back, and it works great.
Nell runs like never before. Great work here
Quoted from Insane:I could be mistaken, but here is a fix that someone created to fix that same problem.
https://pinside.com/pinball/forum/topic/that-trick-never-works-rocky-bullwinkle-club/page/15#post-5230632
I can tell you that mine worked pretty good, but I decided to upgrade to this mod and it works flawlessly every time
Mine would go to the top and spring back, as it should. All before the timer ended, so it would start up again. Timer would run out when it was only half way up the second time, causing the spring to not developed enough tension to send it all the way back.
If I wound the spring one more time, it would work better, but on the first run to the top, it would return hard and fast.
This new system is controlled perfectly, just at the right pace. Timer ends right when nell makes it to the top.
Bonus is, it comes with new motor and gears, so you can put everything back to stock
I have this and works awesome.
https://www.pinballlife.com/mm5/merchant.mvc?Screen=PROD&Product_Code=nell_driver
You're currently viewing posts by Pinsider kba78.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/that-trick-never-works-rocky-bullwinkle-club?tu=kba78 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Euless, TX