I just picked up my TFTC a few weeks ago. Got it working 100% within a few days. Now on to cleaning, cosmetic repairs and mods. I am in the process of airbrushing the lockdown bar, side rails and legs.

I am looking for a scan of the long clear plastic that runds down the upper right side of the playfield. As you can see mine is, well, not exactly as originall supplied. You can also see how filthy my game is.

Please let me know if you can help out with a scan for my damaged plastic.

I will post up some pics of my paint job when finished.

20131003_223916.jpg

Doing a litlle custom painting on the lock down bar, side rails and legs. Still have some work to do along with clear coat.

20131005_163104.jpg 20131005_163043.jpg

1000bulbs.com sells a mounting channel for tape mounted led's. You can even purchase a clear or white cover for the channel.

Can anyone help with a TFTC plastic scan????????????????????????????

I along with at least one other member are looking for a scan or tracing of the long clear plastic that runs down the upper right side of the TFTC playfield.

Any help would be greatly appreciated!!!!!!!!!!!!!!!!!!!!!!!!

Phil,
Thanks for the scans!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
NR

Can anyone help me to determine what is missing or wrong in these pictures?

In the first picture the previous owner half installed a scew on the left side of the ramp. Should something else be in this location? Any thoughts on why the screw might have been used?

In the second picture I have a hex stand off sticking out of a verticle clear plastic. Any idea what is missing?

Thanks for any help!

20131011_001513.jpg
20131011_001526.jpg
20131011_001537.jpg

Is looks like the only screws that hold the ramp down are (2) screws in the ramp flap. Is that correct? It looks like the left side of the ramp wall might be flared out to much. Could a bracket or something be missing? Can someone post a picture of what the base of this ramp should look like?

Phil,
Thanks for the details. You show the width at the thin end as 7/8". Can you provide the width at the other end? The plastic flairs back out at that end and I am not sure how wide it should be.
Thanks!!

Phil,
Can you by any chance post up a picture that shows this long plastic in place? Thanks to your scans and measurements, I will have a new plastic but I am not sure what it attaches to. I have a post for the middle and bottom mounting holes but I have no idea what the top hole should mount to.
Hope you can help once again.
Thanks!

Can anyone suggest how to repair these inserts? It looks like lifting clear but I am not sure.20131019_151305.jpg

I would be happy with a good set of scans so that I can make my own!

Can we pre-order?

Kevin,

Any update on a release date?

Pretty cool! Can I ask where you picked it up?

Kevin,
Are all of the included plastics shown in the picture? My machine has a few pieces not shown in the picture.

Kevin,
Ordered my set yesterday.

Any chance you would be willing to post some pics of the plastics installed? The set inckudes several pieces that are not on my machine and I am not sure where the go.

Thanks forvthe hard work!