Godzilla (Premium)
Stern, 2021
Tales from the Crypt
Data East, 1993You're currently viewing posts by Pinsider mtbpinball.
Click here to go back to viewing the entire thread.
Finally after a long wait I just picked up my Tales from the Crypt! A few minor repairs and adjustments but it looks good are a burned up GI connector and some broken drop targets .. took care of that. now I'm working on the tombstone ... initially thought I had a bad motor but in test I helped it along and it started working . can't get it to work on its own now needs an adjustment maybe on the switches anybody had this issue?
20180703_113415 (resized).jpg20180703_133952 (resized).jpgQuoted from Gogojohnnyquack:I have't had the issue but this sounds like you may want to pull the motor/gearbox/tombstone assembly and clean it. Someone may have put a lubricant on it that has turned gummy.
After looking at the diagram of this assembly in the manual it looks like there was a nylon bushing over top of a pin on a cam that comes off the motor and runs back and forth inside a plastic housing... it was missing. I put a bushing inside there adjusted it height wise and lubricated everything and seems to be working. don't know if a prior owner had it apart before and it fell off.
You're currently viewing posts by Pinsider mtbpinball.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/tftc-owners-fang-club-the-morgue-the-merrier?tu=mtbpinball and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Harleysville, PA