New to the club! Has anyone made insert decals? Doesn't appear so. I can't believe with the demand these haven't happened yet. I know my mylar is going to damage my inserts when I remove.

Well, finally got mine shipped and all the kinks worked out. I had some issues with the ball getting stuck in the trough in the upper right where the electric chair, extra ball hole is. Took the trough off and but some duck tape over the slit where the trough intersects as the is an exposed gap and a slow traveling ball can get hung up. Seems to work.

I also noticed a ton of airballs coming off the drop targets. This is common with drops. I modified one of my indy airball stopper mods I sell and no more airballs. If there is enough demand I might make some more. Im down to 7 pairs left for indy. Perhaps I can make more indys and also some tftc with only the two holes for mounting.

20180121_213224 (resized).jpg

Considering no one makes insert overlays I decided to make some of my own. I didn't make an entire set, just the ones that look like crap on mine. I'm going to print them on water transfer paper and cover them with mylar. Will have to carefully cut out the old and install the new. I'll post before and after pics when done.

I made some for Indiana jones but modified one for TFTC. I have a template to make more for TFTC and IJ as I am out of them but sounds like someone may have made them for TFTC.

Hi All,

I've made airball stoppers for the drop target banks on Indiana Jones. Airballs coming from the drops practically ruin game play. I owned a TFTC and noticed the same thing. I made a stopper and it worked well. I will be making a batch of these for TFTC if there is interest. Probably sell the laser cut piece for around $15 shipped. This will prevent the drop targets from flinging the ball into the air and causing drains you can't control. Let me know if there is interest. It is a clear plastic piece that mounts over the drop targets.

I'm having 40 airball protectors made. They are going to be $20 shipped. Sorry, cost was a bit higher than I thought. I made a limited run to see how well they sold. Made 100 sets for Indiana Jones. I should have a for sale ad up in a week or so depending on how long it takes my vendor to make.

I do ship abroad. Cost a little more but not much. I'll have pics in for sale thread I create. You can probably search history for my indy stopper. Looks the same as both are three bank targets.

Hi All,

Here is a link to the airball mod stopper I made. People fell all over themselves for them when I made them for Indiana Jones. I put one on my TFTC and there were NO more airballs.

https://pinside.com/pinball/market/classifieds/ad/70819

I don't but as members receive theirs maybe they can post pics? You peel off the protective film and they are perfectly clear. You should barely see them on the game.

I only made 40 and once someone posts pics and comments how they stop airballs completely from the drop targets a flood of orders will come in. I sold 1/3 of my Indiana Jones models in less than 24 hours because people have been waiting for them since the first batch of 100 sold months ago. Get them while you can.

Mine are a an 1/8 of an inch thick. That is pretty thick. This is the first time I made TFTC so I'm not sure who you got them from before.

Hi All,

With help from pinsider Sonic I'm going to have the plastic piece that is always broken above the drop targets made in translucent red. I am having 40 made and will sell seperately or with my airball protector. I was provided a cad file by Sonic but just want to verify the measurements if anyone can measure the piece. They are going into production and they want to make a sample before.

NO MORE BUYING ENTIRE PLASTIC SETS BECAUSE THAT ONE IS BROKEN!

If you would be willing I'll send you a priority label and send it back priority with a spare for free when they are done for your contribution. PM me if interested.

Okay, got the pieces back. Had 40 made. The holes line up with my airball mod but don't have a machine to test in. Can someone verify if this looks right before I sell? They are a bit thicker than originals. Same thickness as my airball mod.

20181219_214048 (resized).jpg

20181219_214107 (resized).jpg

Would love if someone could measure. Would hate to sell and have to refund.

Let me know when you get it on sonic and verify it fits. Then I start selling.

Red plastics and airball stopper ready for sale.

https://pinside.com/pinball/market/classifieds/ad/70819

Plus I'm not making again. Once they're gone they're gone.

Hi Guys,

Not selling many of the red plastics with airstopper mod. I slashed the price to $20 for a set just to get rid of them and breakeven. When they are gone they are gone. I'm not making more.

Hey guys, I have been super busy and am thinking about selling my stock of red plastics and airball mods if anyone wants to take over selling them. I think I have 20 airball stoppers and 25 or 27 red plastics left. I would sell them all for $200 shipped to break even. There's plenty of meat on the bone for those that want to sell them individually. Once they are gone they are gone.

I like a lot of things data east did more than Bally, but those pegs are the worst part of a de game.

That's flat metal. Why not use a vice to straighten? just cinch the various parts in a vice. Should straighten it fine.

I hear you. I just know for some reason those spinner parts are hard to come by for a lot of games. You should still be able to polish after straightening.

I'm having airball mods made again. Dropped off sample today. Should hear back from shop early next week. Will update when ready.

Airball mods are in production. Only making 25 sets. $15 shipped. PM me if you would like to get on the wait list. I think they are being delivered around Nov. 6th. Once I have them and verify the quality I will collect payment and ship.

Airball mods are ready.

https://pinside.com/pinball/market/classifieds/ad/87608

I sell them. I have an ad here on pinside.

I have five airball stopper mods left. Not making anymore after they are gone.

is there still a need for more airball stopper mods? I might make a run of 25 more.