Hey all, I have a Stern Terminator 3 and the backbox GI behind the RPG field does not work. In doing some preliminary checking it seems that Q4 on board is fine so I began looking further. There are two fuses that are listed for the circuit in the schematic that I located to the left of the lower IO board in the backbox. In the schematic these are shown as a GRY feed (Power from transformer) to RED-YEL through a 3A fuse and GRY-GRN feed (Power from transformer) to YEL-RED through a 3A fuse. In this game the wiring looks like GRY to GRY-GRN through the bottom fuse and RED-YEL to YEL-RED through the top fuse which does not match the manual and makes no sense. The bottom fuse was blown and replacing it will cause it to instantly blow which I am assuming is because both sides are from the transformer? Can someone confirm how this is wired in their backbox? See the attached pictures for how mine is wired and how the manual shows it. Any help is appreciated. IMG_4572.JPGsce.jpg