Quoted from BadBrad97:Just picked my T2 up this past weekend.
Does the WPC95 red DMD filter from Pinbits fit the T2? That is the only one they have in stock.
No it will not fit.
You're currently viewing posts by Pinsider turbo20lbs.
Click here to go back to viewing the entire thread.
Quoted from BadBrad97:Just picked my T2 up this past weekend.
Does the WPC95 red DMD filter from Pinbits fit the T2? That is the only one they have in stock.
No it will not fit.
Quoted from loscanones:Pictures with the cabinet, in low light, poor quality.
Holes are not trimmed yet.
AHHHH Pincabs = FAIL. Get those off ASAP, hopefully you didnt crank them down. Use these instead if there no marks made from Pincabs.
Quoted from loscanones:Relax, those horrible plastics + legs are there only temporary.Those legs are NEW but looks like garbage. I have to chrome the old ones and this will take time. I have to work with the cabinet, so i use those as a temporary solution.
Thanks for the link, do you have a picture with those ones, installed?
Any idea if i can find them somewhere in Europe? ( Link?)
Even if temporary it is horrible idea. Trust me you need to get those pincabs off ASAP or you risk bubbling of decal or possibly leaving a mark made by pincab. You need the stern style ones I linked earlier with the decal cut around them.
Quoted from loscanones:Right, i took your advice and order the metal pincabs. Do i have to trim the decals around?
I already check my temporary pincabs, there are no marks on the decal, i just added some soft stuff in between, to over protect it. The bolts are not tight so no worries yet. However, the metal protectors will arrive in few days.
Ok good that should help until you get the metal spacers. I would cut just around the metal spacer. If you look at all the new Stern games since AC/DC you will see how they look. The Sterns are cut outside the protectors quite a bit. I don't think you have to cut that far around the spacer, but at least cut lines right where the spacer begins. This will insure no wrinkling/bubbling will ever start.
You're currently viewing posts by Pinsider turbo20lbs.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/terminator-2-clubmembers-only?tu=turbo20lbs and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.