This is T2 related so I hope you guys don't mind. I had the 2 versions of the bb decals so I had them mounted on some thin aluminum, I drilled out the eyes and lit up them. I have 3 of them mounted on the ceiling in the game room looking down on the people.

IMGA0071.jpg
IMGA0072.jpg
IMGA0073.jpg
IMGA0960.jpg
IMGA0965.jpg
IMGA0969.jpg

Well the red of his eye is 11/16in. in diameter. What is the diameter of that?

You can buy chrome legs from Marco or Pinballlife. The chrome isn't the best though.

I tried it and it's junk. Just buy the chrome legs.

Yup those are the best, show quality chrome but you'll pay for it though.

Yes they are for show quality. But $70 for 4 standard chrome legs is a good price. Just like anything pinball related it all boils down to what quality you want and how much you want to spend.

That's what I thought too but it is his game.

You could try cutting a piece of plastic milk jug and standing it up back there. I've done it before on my HS2 and it works great.

Just take it out and slide a powered sub under the game. That's what I did.

Just run the + wire from the game to the + terminal on the sub and the - wire from the game to the - terminal of the sub. It's just like hooking up a normal audio speaker. But remember the sub has to be a powered sub.

Great....hope ya bought him a beer or 3.

Here's a picture of the led strips I used on all the ramps on my T3, they are only half the width of a reg. strip and they have more leds per length. I got them on ebay, search for "1210 12v (what ever color you want) ( what ever length you want, 30, 60 or 90cm) led strip. Look for a picture of the strips that look like the bottom strip in my picture. They can be cut every 3 leds. They do not have sticky backing, I use Super Glue gel and just use a dab every 3 inch's or so. This is what my T3 looks like.

With no leds on ramps.
IMGA0872.JPG
IMGA0740.jpg
IMGA0874.jpg
IMGA0880.jpg
IMGA0881.jpg
IMGA0878.jpg
IMGA0869.jpg
IMGA0870.jpg
IMGA0882.jpg

Bob, I was just using my T3 as a reference to show what the strips look like.

If it's 12v or whatever all ya gotta do is buy the proper wall wort. That's what I do for my leg light-ups.

Wish I had room for a T3 topper.

Yup. What I wouldn't give for another foot and a half.

Clear, with Comet rgb dual slow fade flex head.

Beatmaster's shooter housing light up is pretty cool.

I hope it's on free play then.

I don't know about that, the bat canon on Batman Forever is pretty sweet.

There's always my LED Leg Light-Up, they will add a very nice glow to the front of the cab and make the game stand out in the line.

I have a mod for sale, they are my LED Leg Light-Ups. Look for the topic "New LED Leg Light-Ups", or in the Market Place. Also Pinsider beatmaster has his Shooter Housing Light up for sale too. Combined our mods put your game in a whole new light.

They are the clear plastic cab protectors so they extend out from the leg about 3/8th of an inch and that 3/8th lights up and lights up some of the cab too. Look at the pictures on my topic.