I´m designing Terminator 2 Pinball Custom Cards.

"Terminator 2 Custom Pinball Cards - Instructions" (Williams). Designed by Zona Arcade & Mikonos.
http://www.zonaarcade.com/fotos/capturas/terminator%202%20Custom%20Pinball%20Cards%20-%20Instructions.%20Mikonos1.jpg

Details in "Terminator 2 Custom Pinball Cards - Instructions" (Williams). Designed by Zona Arcade & Mikonos.
http://www.zonaarcade.com/fotos/capturas/terminator%202%20Custom%20Pinball%20Cards%20-%20Instructions.%20Mikonos2.jpg

Follow me for more artworks in my thread:

https://pinside.com/pinball/forum/topic/restored-and-customized-pinball-artworks-showroom-thread-by-mikonos

terminator 2 Custom Pinball Cards - Instructions. Mikonos1.jpg

terminator 2 Custom Pinball Cards - Instructions. Mikonos2.jpg

Hi!

Yes, I´m only sharing for exchange with other collectors.

In first post of my thread I explaned it:

https://pinside.com/pinball/forum/topic/restored-and-customized-pinball-artworks-showroom-thread-by-mikonos

Excuse me if this policy is annoying, but is for my own protection.

Regards

Hi tezting!

Are these you are looking from me?

Preview: "Terminator 2 Main Aprons". In restoration process by Mikonos.
http://www.zonaarcade.com/fotos/capturas/Terminator%202%20Aprons%20Preview%20Mikonos.jpg

Terminator 2 Original aprons (Photo 1).
http://www.zonaarcade.com/fotos/miscelanea/flipper-terminator-2-f1775-baa.jpg

Regards

Terminator 2 Aprons Preview Mikonos.jpg
flipper-terminator-2-f1775-baa.jpg

Hi tezting again!

Let me explain this publicly for the benefit of all.

This was your question: "Yes it’s the apron you posted in the thread.
But they suck because of all the black on the sticker.
Water slide decal is a ultra thin transparent material you can use for etc. pinball restore. You print on it and then you put them where you want them and you can clear coat over them. When you do that it looks like it was painted direct on because it’s so thin."

Transparent vinyl without white ink have 2 problems: 1) darker effect in back colour because gloss print material. 2) Transparent vinyl printed becomes translucent vinyl (but with black colour, it becomes oppaque).

I just prepared a little graphic to explain it in a better way. Here is:
http://www.zonaarcade.com/fotos/capturas/Transparentvinylexplanation.jpg

About printing with white ink, it is expensive and not all print shops have special machines or installed white ink.

Regards

Transparentvinylexplanation.jpg

Hi tezting!

Let´s see, if you don´t want) A Printed vinyl with gloss or mate lamination because black colour, 2) a transparent vinyl because gloss and darkner effect over black colour and 3) a transparent vinyl with white ink because it is expensive and gloss/darkner effects over black colour, then there are 2 more solutions:

A) Silkscreen printed over your metallic apron zone. It´s expensive for only one user. About $300.

B) Die cut vinyl to paint it by yourself. It is cheap, results are like silkscreened but you need to make colours.

I will show an explained graphic of other of my restorations about "Die cut vinyl" with relation with pinball world:

Backbox Williams Warning Text - Paint instructions. By Zona Arcade & Mikonos.
http://www.zonaarcade.com/fotos/capturas/Backbox%20Williams%20Warning%20Text%20paint%20instructions.%20Mikonos.jpg

Backbox Williams Warning Text paint instructions. Mikonos.jpg

Some people asked me about "BACKBOX WILLIAMS PINBALL WARNING TEXT" restored by me. I´m only a fan, I can´t supply large quantities in a short periot of time. sorry!. Here is:

http://zonaarcade.forumcommunity.net/?t=59756957

Regards

If there are not more printing questions about "Terminator 2 Aprons", I will return to my modded pinball cards for this pinball.

I´m designing all my recent pinball cards keeping in my mind chrome vinyl. I will show a little sample of this material:
http://www.zonaarcade.com/fotos/miscelanea/Chrome%20Vinyl.%20Mikonos.jpg

Regards

Chrome Vinyl. Mikonos.jpg

Hi Chitownpinball!

Watermark in my images and screenshots is to avoid commercial purposes, in fact. Some shop are using them to sell his own products (or stolen from me when they are shared for free). I have a lot of examples. I try to do it diffcult from them.

Sorry if it is annoying, but I do very big screenshots to balance it. You have the opcion to ignore my post too.

Regards

Tezting, hater gonna hate! Trolls gonna Troll!

You ignore them, is my advice! I follow my own advice at that point.

If you have questions about "Terminator 2 Pinball", this is the right "Club". I have a lot of ideas for modding this pinball and I will show them here, in spite of some kind of people.

Be free, don´t let them to restrict your freedom.

Regards

And this is the "Crew" card for "terminator 2":

"Terminator 2 Custom Pinball Cards - Crew" (Williams). Designed by Zona Arcade & Mikonos.
http://www.zonaarcade.com/fotos/capturas/Terminator%202%20Custom%20Pinball%20Card%20-%20Crew.%20By%20Mikonos1.jpg

Details in "Terminator 2 Custom Pinball Cards - Crew" (Williams). Designed by Zona Arcade & Mikonos.
http://www.zonaarcade.com/fotos/capturas/Terminator%202%20Custom%20Pinball%20Card%20-%20Crew.%20By%20Mikonos2.jpg

Regards

Terminator 2 Custom Pinball Card - Crew. By Mikonos1.jpg

Terminator 2 Custom Pinball Card - Crew. By Mikonos2.jpg

I just sent to print all cards in chrome vinyl with gloss protective lamination. A long of the next week I will pick up and show.

Regards

I have printed results. It is difficult to photo chrome material, but it is so beautiful!

"Terminator 2 Custom Pinball Cards - Rules" (Williams) printed in chrome vinyl with gloss protective lamination (photo 1).
http://www.zonaarcade.com/fotos/artes/Terminator%202%20Custom%20Pinball%20Card%20-%20Rules.%20print1.jpg

"Terminator 2 Custom Pinball Cards - Rules" (Williams) printed in chrome vinyl with gloss protective lamination (photo 2).
http://www.zonaarcade.com/fotos/artes/Terminator%202%20Custom%20Pinball%20Card%20-%20Rules.%20print2.jpg

Terminator 2 Custom Pinball Card - Rules print1.JPG

Terminator 2 Custom Pinball Card - Rules print2.JPG

... and my custom "crew" card. This time I took photos in interior for capting metallic effect in all colours. Photos are not as good as I want but card is gorgeous!

"Terminator 2 Custom Pinball Cards - Crew" (Williams) printed in chrome vinyl with gloss protective lamination (photo 1).
http://www.zonaarcade.com/fotos/artes/Terminator%202%20Custom%20Pinball%20Card%20-%20Crew.%20print1.jpg

"Terminator 2 Custom Pinball Cards - Crew" (Williams) printed in chrome vinyl with gloss protective lamination (photo 2).
http://www.zonaarcade.com/fotos/artes/Terminator%202%20Custom%20Pinball%20Card%20-%20Crew.%20print2.jpg

Terminator 2 Custom Pinball Card - Crew print1.JPG
Terminator 2 Custom Pinball Card - Crew print2.JPG

I will try new photos in exterior next day.

Regards

Thanks for your opinion, PeterG!

Photos are not good, but all is perfect readible. Look design of crew card (pick in photos and screenshots for full size):

"Terminator 2 Custom Pinball Cards - Crew" (Williams). Designed by Zona Arcade & Mikonos.
http://www.zonaarcade.com/fotos/capturas/Terminator%202%20Custom%20Pinball%20Card%20-%20Crew.%20By%20Mikonos1.jpg

Details in "Terminator 2 Custom Pinball Cards - Crew" (Williams). Designed by Zona Arcade & Mikonos.
http://www.zonaarcade.com/fotos/capturas/Terminator%202%20Custom%20Pinball%20Card%20-%20Crew.%20By%20Mikonos2.jpg

Terminator 2 Custom Pinball Card - Crew. By Mikonos1.jpg
Terminator 2 Custom Pinball Card - Crew. By Mikonos2.jpg

I like to add information, I think it adds beautiful and useful information in my opinion.

Regards

I was working in my "terminator 2 Pinball Translite" last week. Here are my results:

"Terminator 2 Pinball Translite" (WILLIAMS) restored by Zona Arcade and Mikonos.
http://www.zonaarcade.com/fotos/capturas/Terminator%202%20Pinball%20Translite.%20Mikonos1.jpg

Details in "Terminator 2 Pinball Translite" (WILLIAMS) restored by Zona Arcade and Mikonos.
http://www.zonaarcade.com/fotos/capturas/Terminator%202%20Pinball%20Translite.%20Mikonos2.jpg

Details in "Terminator 2 Pinball Translite" (WILLIAMS) restored by Zona Arcade and Mikonos.
http://www.zonaarcade.com/fotos/capturas/Terminator%202%20Pinball%20Translite.%20Mikonos3.jpg

I made bigger screenshots, click to enlarge images (and click again on display image mode if it is necessary) for avoid blur effect of pinside´s miniatures.

I hope you like!

I will scan all "Terminator 2 Pinball exteriors" at the end of this month for to make a precise restoration. If you know my restoration work, you know how accuracy it is. I hope to show all finished pieces in 3 months.

Regards

I made a new custom card about "price"! I play with "A" letter and "Ciberdyne Logo" in "For amusement Only" phase! (It was not first time).

I hope you like and inspire you for yours own custom cards!

"Terminator 2 Custom Pinball Card - Price". Designed by Zona Arcade & Mikonos.
https://www.zonaarcade.com/fotos/capturas/Terminator%202%20Custom%20Pinball%20Card%20-%20Price.%20Mikonos1.jpg

Details in "Terminator 2 Custom Pinball Card - Price". Designed by Zona Arcade & Mikonos.
https://www.zonaarcade.com/fotos/capturas/Terminator%202%20Custom%20Pinball%20Card%20-%20Price.%20Mikonos2.jpg

Terminator 2 Custom Pinball Card - Price. Mikonos1.jpg

I made bigger screenshots, click to enlarge images (and click again on display image mode if it is necessary) for avoid blur effect of pinside´s miniatures.

Regards